Introduction

The story of the Verizon iPhone 4 is definitely an astonishing one. Leading up to nearly every iPhone release was endless speculation that a CDMA version would launch simultaneously, finally bound for the largest carrier in the US. The combination of carrier exclusivity, endless reports of AT&T's 3G failing during trade shows and conferences, pent up demand, and numerous other factors combined to create a perfect storm of rumor and mystery. Each time, analysts, insiders, and pundits alike were certain it was just months away - and then prove to be no more well informed than the rest of us.

It's surreal to think that everyone finally got it right. In retrospect, it also seems fittingly ironic that Duke Nukem Forever will launch the same calendar year as the Verizon iPhone 4.

The truth is that what differs between the Verizon iPhone 4 and its older brother isn't a whole lot - and that's overwhelmingly a good thing. In case you're just starting out, the main difference between the two is entirely network technology. In the USA, carriers such as Sprint, Verizon, US Cellular, MetroPCS and a number of others use 3GPP2 camp technologies for a variety of reasons. These are CDMA2000-1x, and CDMA2000-EV-DO, known colloquially as just 1x and EVDO.

The story goes something like this. Europe and the majority of the planet soon after adapted GSM for 2G, then 3GPP technologies for 3G - UMTS, HSPA, and now LTE all are under the 3GPP umbrella. In the USA, AT&T and T-Mobile are the dominant carriers running network tech from the 3GPP camp. Both have GSM/EDGE 2G and UMTS 3G networks.

The confusing bit in here is that CDMA is often confused with CDMA2000. On its own, CDMA refers just to the multiplexing scheme used - Code Division Multiple Access. Both CDMA2000 and UMTS use CDMA as the multi-user access scheme, the difference is primarily that UMTS allows 5 MHz channels (WCDMA) whereas CDMA2000 uses 1.25 MHz channels for data and voice. Before UMTS arrived on the scene, the distinction made a bit more sense since GSM is TDMA - Time Division Multiple Access.

Apple shopped around for a carrier to bring its iPhone to, and settled on Cingular after getting the door slammed in its face by everyone else, or so the legend goes. Cingular became AT&T, Apple released a GSM/EDGE 2G phone, then three 3G phones with different levels of HSPA support, and you know the rest.

Physical Differences

It's boring to start out a review with a history lesson though, so let's stop there. On to what's different about the CDMA version of the iPhone 4. 

The Verizon iPhone 4 has a noticeably different outside appearance. The AT&T (GSM/UMTS) iPhone 4 is on top, the Verizon (CDMA) iPhone 4 is on the bottom in all the following photos.

The black stainless steel strip at the top has moved to the far left side, displacing the vibration switch by a mm or two. 

The right side has a new symmetrically placed black strip as well. The two at the bottom remain the same on both sides. Obviously the other big change is the absence of a SIM slot entirely - oh and likewise there's no SIM ejector tool in the box.

On the back, there's another more aesthetic difference. The Verizon iPhone 4 lacks the regulatory labels that adorn the AT&T version. Gone are the FCC, non-recyclable battery, and European Conformity CE markings. Apple seems to do something to visually distinguish each iPhone based entirely on the back. The iPhone 3GS brought chrome on the back to distinguish it from the 3G, and the CDMA iPhone 4 does away with some iconography. Fair enough.

On the bottom nothing much is changed, though the Verizon iPhone 4 comes with pentalobe screws whereas our launch iPhone 4 has phillips.

One of the other interesting changes is how vastly different the vibration unit is. I was a bit skeptical that the difference would be perceptible - it's actually noticeably different. The older vibrate unit feels loud and harsh, like something inside is actually rattling around. Of course, the old vibration unit is rather standard fare for phones - a counterweight on a motor. The new vibration unit occupies much more area inside, but the vibration feel is entirely different. It's almost completely silent, and makes the entire phone feel like it's moving as one complete piece. It's difficult to describe - it's a deeper and more precise vibration.

I've put together a video overview of everything there is to mention about the Verizon iPhone 4, and included in there is a demonstration of how silent the new vibration unit is. 

Not making any noise while vibrating is both a good and bad thing depending on the context. I always leave phones on vibrate, so having them make some noise is occasionally useful. It's virtually undetectable now, so if you leave the phone on a desk and have a call come in, chances are good you'll miss it unless you can feel the vibe.

On the flipside, it's a completely different experience when you're on a call and an email or SMS comes in. This is when not having the vibrate unit not make any noise is a godsend. Previously, the vibration was intense and noisy enough to make it difficult to hear the other party, and at the same time the noise was audible on the other side of the call. Now, it's silent enough to not interrupt the conversation or cause a lapse in audibility at all.

Diversity Antennas, Deathgrip Revisited, Wifi, and GPS
POST A COMMENT

35 Comments

View All Comments

  • hsew - Sunday, February 13, 2011 - link

    lolnoobs and LOLphone?

    I lol'd at the speed tests. Makes me wish I bought an iPad when the data was still unlimited.
    Reply
  • guest123 - Sunday, February 13, 2011 - link

    First off, thanks for the typically thorough review, Brian.

    I wonder, though, about your conclusion that the Verizon iPhone is "significantly less prone to unintended signal attenuation." True, in the "cupping tightly" scenario the Verizon iPhone is now in line with other leading smartphones, and in the "holding naturally" scenario it improves on the performance of the At&T model. But the Verizon iPhone is still significantly more prone to attenuation in the "holding naturally" scenario than any of the phones you've listed. To me, this was always the real point of the attennagate controversy: as your chart shows, the At&T iPhone is more prone to attenuation when held naturally than other phones are when held in a death grip. Based on your results, the Verizon version has improved, but only to the extent that it attenuates about as badly when held naturally as other phones do when death-gripped. That still seems like a non-trivial problem.
    Reply
  • jmcb - Monday, February 14, 2011 - link

    I'm glad I'm not the only one who noticed that..... Reply
  • jmcb - Monday, February 14, 2011 - link

    Noticed that when held naturally its still worse than any other phone on the list.... Reply
  • 7Enigma - Tuesday, February 15, 2011 - link

    I agree with you as well. I did not like the wording in this section as 99% of people using a PHONE are going to hold it like a PHONE. So while the other numbers are nice to have for specific usage scenarios, the one that is the most important, while improved, is still significantly worse than anything else (other than the AT&T iPhone). Reply
  • mike55 - Sunday, February 13, 2011 - link

    I've noticed that the AT&T iPhone 4's have varying degrees of warmer screens than the relatively cooler screen on the AT&T unit you mentioned in this review. I would be interested in seeing how the different screens compare in terms of black level, maximum brightness, color accuracy, etc.

    Maybe you guys could get a bunch of units and compare them. It would be interesting to see how other smartphones fare in terms of display panel variance from unit to unit. I'm sure all of the display nerds like myself would appreciate such an article. :D
    Reply
  • cgalyon - Sunday, February 13, 2011 - link

    How does this review not say, "it's the iPhone 4, on Verizon. The radio is different, the rest is the same."? Reply
  • 7Enigma - Tuesday, February 15, 2011 - link

    If that's what you think why click on the review? And why comment? Reply
  • Voldenuit - Sunday, February 13, 2011 - link

    Well, obviously the EU regulatory iconography (CE, CE compliance identifier, CE Alert icon) didn't need to exist anymore since a CDMA phone is pretty useless in Europe.

    I'm surprised that the FCC label also vanished, though.
    Reply
  • LTG - Monday, February 14, 2011 - link

    1) Great facts - You somehow took a topic I thought would be a snoozer and extracted quite a bit of interesting detail i hadn't read before.

    2) Great prose - The general approach, style, and constant attention to what readers are thinking. Feels like we're discovering it all with you.

    3) Technical writing mistakes - i didnt notice any! I know it sounds like a really lame point. But it actually is a nice benefit to not be jarred out concentration by typos or grammar mistakes. Its like a luxury on the Internet and makes the experience so smooth.

    With all the comments critical of writing here I think its fair to call out the opposite side as well.

    Peace -
    Reply

Log in

Don't have an account? Sign up now