The visit to ASRock was more like I would expect when visiting such a place – I was only allowed to take pictures in certain areas, such as the main offices, but not in places such as the new product development, or regarding product testing.  It was all fairly open plan – the design and testing employees were all within earshot of one another, or a short walk down the corridor.

The first thing that struck me was a wall of motherboards:

I was told that these are products for testing and future reference.  As with any major manufacturer of any sort of business, knowing your competitors product is vital in predicting what will come out next and what your product needs to have the competitive edge.  ASRock are no different: there were various other manufacturers products dotted over all the desks – particularly GPUs as ASRock do not currently make their own.

Testbeds were built using design PCBs with nothing attached, which is a good idea if you have plenty laying around.  Whilst walking through, I had a sense that the engineering section, in terms of cleanliness, was less polished – lots of space was taken up with motherboards for testing or motherboards for shipping, and the filing system seemed to consist of ‘let’s stack this here or there’.  Nevertheless, I did see people hard at work!

As part of the tour, I was introduced to the engineers in charge of the ASRock Intel and AMD platforms, as well as the Vice Presidents in charge of Research and Development.  I spent most of my time talking to the engineer behind the designs of the Fatal1ty products – ASRock’s higher end platforms designed at gaming.  We had a long chat based on what I feel various market segment needs, some of ASRock’s design philosophy, and how design should meet price targets but still be competitive.  At one point it was suggested that we make a X79-IAN, however after chatting to the VP of Sales, I would also have to be in charge of marketing…!

Part of the areas in which I was not allowed to take pictures included some product testing – particularly with regards extreme temperature and humidity.  There were three main units, each around six foot high and five foot wide, using a combination of heaters and liquid nitrogen to create environments below 0ºC and above 70ºC at a range of humidity, all the while looping various stability tests.

Last year, I was told by ASRock that over 8 million motherboard units were sold worldwide (compared to 20+ million by ASUS), with a revenue in excess of $300 million – not bad for a company with around 250 employees worldwide.  I was constantly told that ASRock are continually looking to expand, but require the appropriate staff to do so.

 

ASRock Booth
POST A COMMENT

17 Comments

View All Comments

  • jabber - Sunday, June 12, 2011 - link

    In fact quit with all the logos and screen printing pointing out all the features.

    Most folks either dont have a clue what they do so dont care or folks like us know what they are and already know what the board has.

    By all means put the board name and revision on it but we really dont need to know or care the board was "Designed in Taipei".
    Reply
  • Taft12 - Monday, June 13, 2011 - link

    Better "Designed in Taipei" than "Designed in Cupertino" Reply
  • Spazweasel - Monday, June 13, 2011 - link

    There is no article in which an Apple hater cannot find an excuse to wedge his drivel. Reply
  • Andrew Rockefeller - Sunday, June 12, 2011 - link

    The digital display on the ATX boards make me believe that somehow thay are major components of time travel device. More investigation required. (Answers must be in that secret room). Reply
  • JessusChristDoOTcom - Sunday, June 12, 2011 - link

    <quote> I understand that there are distinct legacy applications that require these connectors – but not on an enthusiast product (I have similar issues with the new Fatal1ty series). Perhaps make a 970X-Legacy with as many legacy features as possible, but don’t try and put them into an enthusiast product. </quote>

    Enthusiast products require these connectors. I look for an enthusiast board when buying one but I look for one with a floppy connector and preferably with an IDE connector as well. Floppy is a must for me. I was looking to buy a Fatal1ty series board and I am glad they went with the inclusion of a floppy connector. I just bought a floppy/multi-reader combo and why?.. so I can have, as an enthusiast, the best of both worlds. Now, if only every manufacturer would include Intel LAN on their motherboards it would make life so much easier--ASUS already realized the mistake of the industry and started to integrate Intel LAN into their boards--thanks ASUS.
    Reply
  • zhongkko - Sunday, June 12, 2011 - link



    very good web,believe you will love it.

    FREE SHIPPING,accept pyapal

    discount including evisu jeans,watches shirts,bags,hat and the decorations

    trust me!

    Quickly snapping up right
    Reply
  • jielundd - Monday, June 13, 2011 - link

    The website whol esale for many kinds of fas hion sho es,
    like the nik e,jord an,pr ada, the jea ns,shirts,bags,hat and decorations.
    All the products are free ship ping, and the the price is com petitive,
    and also can accept the pay pal pay ment.
    ,after the paym ent, can ship within short time.
    Reply

Log in

Don't have an account? Sign up now