Sandy Bridge Celerons

Intel released Sandy Bridge-based Celeron CPUs in early September, and these started appearing in retail channels by the middle of that month; we provided a brief overview of these parts. The Celeron that stands out is the G530, a dual-core CPU clocked at 2.4GHz with 2MB L3 cache and on-die Intel HD Graphics. This processor lacks Hyper-Threading and Quick Sync support, and it has a TDP of 65W (though it will generally use far less power than that). While Intel's suggested pricing is a meager $42, retail prices have stayed steady since its release at $55-60. It is the least powerful Intel dual-core CPU, with only the single core G440 available for less money.

If you've been building and using computers for years, you know there is a stigma attached to the Celeron name. For a long time, Celerons were crippled to the point of near-unusability for even the most basic tasks. That has changed as our basic benchmarks indicate that the G530 is not at all an almost-garbage CPU. The Celeron stigma is dead.

Athlon II X2s

AMD's Athlon II X2 Regor-based 45nm dual-cores have been a mainstay of budget computing since their introduction in 2009. The Athlon II X2 250, clocked at 3.0GHz with 2MB L2 cache, is essentially as capable today as it was two years ago for basic usage. For example, 1080p videos on YouTube are no more difficult to decode and Microsoft Office 2010 isn't much more CPU-hungry than Office 2007 was. Given that most computers I assemble are budget systems, I've now used the Athlon II X2 250 for more builds than any other CPU. Is that about to change?

Llano APUs

AMD's most recent APUs (accelerated processing units) have also expanded into the budget processor range. These Fusion APUs combine both the CPU and Radeon "cores" on a single die. Anand reviewed the most capable APU back in June, and compared the A6 model to Intel's Sandy Bridge Pentium in late August. The more recently released 32nm A4-3300 chip (overviewed by Anand in September) is a dual-core part clocked at 2.5GHz with 1MB total L2 cache and featuring AMD's Radeon HD 6410 graphics—160 GPU cores clocked at 443MHz. Its nominal TDP is 65W. Priced around $70, the A4-3300 is only about $10 more than the Celeron G530 and Athlon II X2 250. It promises better graphics performance—but how does the least expensive A-series APU compare to inexpensive discrete video cards, and do you sacrifice processor performance for better graphics?

Battle of the Budget Processors: Benchmarks

While we didn't put the Celeron G530 and A4-3300 through our extensive Bench suite, here are a few benchmarks that show how they stack up against the venerable Athlon II X2 250. All benchmarks were performed using an Antec Neo Eco 400W power supply, a Western Digital Blue 500GB WD5000AAKX hard drive, and a 2x2GB kit of DDR3-1333 with a clean installation of Windows 7 Enterprise 64-bit, with only the manufacturer-supplied drivers installed.

Conversion of a PowerPoint Presentation to a PDF

For this benchmark, I converted a 100 slide, 25MB PowerPoint file to a PDF using Microsoft Office 2010's integrated "Save as PDF" option. As you can see, the Athlon II CPU performs this task slightly faster than the Celeron, though in reality you're only going to actually notice a difference if you're converting extremely large PowerPoint files. The Fusion APU is substantially slower—this is a difference you will notice in real-world usage scenarios.

7-Zip performance

These values were obtained using 7-Zip's built-in benchmark function with a 32MB dictionary. AMD's Athlon II CPU has a more noticeable advantage here over the Celeron—you will notice a difference if compressing/decompressing either many files or large files. The A4-3300 again performs palpably worse--no surprise given its lower 2.5GHz clock compared to the Athlon's 3.0GHz.

FastStone image resizing

For this test, I resized 50 4200p pictures down to 1080p resolution using FastStone's batch image conversion function. Again, the two CPUs perform similarly, though this time Intel takes the lead. The AMD APU once again lags significantly behind the two CPUs.

x264 HD encode test

Graysky's x264 HD test (v. 3.03) uses x264 to encode a 4Mbps 720p MPEG-2 source. The focus here is on quality rather than speed, thus the benchmark uses a 2-pass encode and reports the average frame rate in each pass. The difference between the Athlon II and Celeron CPUs is essentially nil; both offer better performance than the AMD APU.

Power consumption

Like the above benchmarks, all components were held equal for power consumption testing sans the CPU and motherboard. For the Athlon II platform, I used the ASRock 880GM-LE motherboard, for the Intel platform I used the ASRock H61M-VS motherboard, and the APU was tested on an ASRock A55M-HVS. This is where the efficiency of the newer architectures truly outshines the older Athlon II design. Measurements were taken using a P3 International P4400 Kill A Watt monitor and reflect the entire system, not just the CPU.

Intel's Celeron still leads for low power use, but Llano is at least within striking distance. The older Athlon II X2 uses around 50% more power than Llano for these two tests--or around 17 to 30W more power. Taking the lower number and going with a system that's only powered on eight hours per day, we end up with a difference of around 50kWh per year--or $4 to $15 depending on how much you pay for electricity. If you're in a market where power costs more, obviously there's a lot to be said for going with the more efficient architectures.

Gaming benchmarks

Next we test how the AMD A4-3300 APU's graphics prowess stacks up against a budget GPU. The AMD Athlon II and Intel Celeron CPUs were paired with an AMD Radeon HD 5670 512MB DDR5 discrete GPU as neither of their integrated graphics are capable of producing a tolerable gaming experience. The A4-3300 was not paired with a discrete GPU.

Left 4 Dead 2

For the Left 4 Dead 2 benchmark, we used a 1024x768 resolution with all settings at maximum (but without antialiasing). The AMD APU delivers almost 40 frames per second by itself, so no discrete graphics card is required. Subjectively, gameplay was smooth and fluid on the APU. However, bumping up the resolution to even 720p could be an issue, even with less demanding games.

DiRT 3

For the DiRT 3 benchmark, we used DirectX 11 at 1024x768 resolution, but this time graphics options were set to the low preset. Even then, the AMD APU struggled to breach the 30 frames per second threshold, and DiRT 3 clearly did not run as smoothly as Left 4 Dead 2. That said, it remained playable, and if you're tolerant of lower resolutions, it performs fine in windowed mode.

Keep in mind that we're using the bottom-rung Llano APU for these tests, and it's a pretty major cut from the A6 models--half the shader cores, but with a slightly higher clock, and only a dual-core CPU. Where the A6 and A8 can legitimately replace budget discrete GPUs, the same cannot be said for the A4 APUs. The lowest priced A6-3500 will set you back around $100, but it drops the CPU clock to 2.1GHz and only adds a third core. Meanwhile the quad-core A6-3650 will run $120 ($110 with the current promo code), but it sports a 2.6GHz clock with the HD 6530D graphics (and a higher 100W TDP). At that point, you might also be tempted to go for the A8-3850, with the full HD 6550D graphics and a 2.9GHz clock, which brings the total for the APU to $135. All of these APUs will work in the same base setup as our Llano build, but obviously the price goes up quite a bit. If you'd like added processing and graphics power, though, the quad-core parts make sense.

Summary

As you can see, the Athlon II and Celeron CPUs are very evenly matched across a range of basic productivity tests, while the Fusion APU typically lags behind, at least for office productivity and encoding tasks. That said, the A4-3300 is capable of delivering an acceptable gameplay experience for casual gamers without necessitating a discrete GPU. Additionally, Intel's newer Sandy Bridge architecture and AMD's newer Llano architecture result in dramatically lower total system power consumption at both idle and load compared to the aging AMD Regor architecture.

So which CPU should you buy for your budget build? In terms of upgradeability, socket AM3 is still viable. In the short term, Phenom II quad-cores are already inexpensive, starting at just over $100—so they will be even cheaper in another year or two. Of course, Bulldozer CPUs are compatible with many AM3+ motherboards and could be a wise upgrade in a few years as well. Intel's LGA 1155 socket is also very upgrade-friendly—the Celeron G530 is, after all, the least powerful Sandy Bridge CPU (aside from the sole single-core SKU). The Core i3-2100 will likely sell for less than $100 in another year or so (at least on the secondhand market), and more powerful Core i5 and i7s could keep today's Intel budget build alive and well for maybe as much as five more years. Like the Celeron G530, AMD's socket FM1 has nowhere to go but up from the A4-3300 APU. That said, LGA 1155 currently offers far more powerful CPUs than the high-end A8-3850.

I think in this case, given how evenly the CPUs perform (aside from power consumption), and that both offer lots of upgrade potential, the decision will come down to overall platform cost and features. The A4-3300 APU does offer an acceptable general, basic computing experience—its real strength is its ability to play less resource-intensive games without the extra cost of a discrete GPU. We cover a few budget AMD and Intel platform motherboards on the next page.
Introduction Motherboards and Features
Comments Locked

95 Comments

View All Comments

  • Taft12 - Tuesday, November 8, 2011 - link

    Not only do you not need a graphics card, you'll have much better thermals and acoustics from your small form factor HTPC case without an additional furnace in the case.
  • Death666Angel - Tuesday, November 8, 2011 - link

    This was precisely why I chose an A6-3500 for my HTPC. I came from a Core i3 530 (which could OC to about 4GHz) and an HD4670. I used it for a few games (beat em ups, racing games etc.) and of course movies/tv series of all sorts. But once I decided to get a new, smaller case (I had a desktop HTPC case that fit 7HDDs but they moved to a dedicated file server making the case too big for the living room), I decided against the SNB line up, because of the crappy game performance. My Llano setup saved me money assuming I went for a SNB setup with equal graphics power. And then, the system would not have allowed the case I ended up using (half height, no PCI slot in the back, 60W PSU). I is awesome to just have to worry about cooling one thing, not an extra graphics card and no IGP chip on the motherboard. :-)

    Overall, I think this article is interesting but a bit all over the place. As others have mentioned, you compare Llano sans graphics card to X2/Celeron with graphics card.... you don't show the power consumption of those two with graphics card.... While I agree with the overall theme of it, it is not very thorough or thought through. I think people not familiar with all the different tests will have a harder time figuring out which is the best setup for them.

    I also don't like the dual-core Llanos. The graphics part is too cut down. The triple core for me was a great balance, because I needed to fit the 60W envelope of the PSU (works great with undervoling, I'm at 54W@2400MHz LinX) and I wanted a powerful graphics part. And the difference between the dual core and triple core parts for me was about 15 or 20€. If I wanted, the triple core also looks to be easily overclockable with K10Stat from within windows.

    But enough ranting for now. :D
  • piroroadkill - Tuesday, November 8, 2011 - link

    Sure, the GPU may be a bit worse than the Llano system, but you can't underestimate the usefulness of already having a socket 1155 board. You're immediately open to THE best upgrade path with nothing more than a flip, a click, and a pop of 4 pins.
  • piroroadkill - Tuesday, November 8, 2011 - link

    Along those lines, I'd spend a teeny bit more to begin with on the PSU. Then you're all set.
  • Lunyone - Tuesday, November 8, 2011 - link

    The PSU is just fine, IMHO. I have a e6700, 6850 GPU, 4 gb's DDR2, 2 DVD's, & 1 HD being powered by the Antec 380w PSU. It runs just fine and no issues whatsoever, so these systems have plenty of upgrade path with the PSU's selected. Now if you get a really power consuming GPU than you should upgrade the PSU, but most people the PSU is just fine.
  • Dustin Sklavos - Tuesday, November 8, 2011 - link

    Honestly, people grossly overestimate the amount of PSU they need these days. My desktop is running an 80 Plus Gold 1.2kw PSU, but under heavy load only pulls maybe 510 watts? That's with an overclocked i7-990X, overclocked GTX 580, four hard drives, an SSD, a separate USB 3.0 card, AND a GeForce GT 430 driving two other monitors.

    So long as the PSU is quality (and mine is) and the amperage is right, people could be getting by with a LOT less these days than they actually use. On the flipside, if I ever completely lose my mind, at least I know my desktop'll take a second 580. ;)
  • JarredWalton - Tuesday, November 8, 2011 - link

    Look who's talking about overestimating power requirements. LOL. 1.2kW PSU, Dustin? I'm running my GTX 580 off a "paltry" 750W model. ;-)
  • ckryan - Tuesday, November 8, 2011 - link

    Man, my OCd 2500K P67 system idles at 50w@the wall and pulls about 200w gaming... with a 650w Seasonic X series PSU. That's about the same ballpark of ridiculous, but as soon as someone makes an equally great 350w I'll get one. 1.2KW is pretty silly though... I hope the PSU was comped at least. I got the Seasonic for $100 shipped and the fan never comes on even when gaming so that's one justification.

    Incidentally, I just purchased the G530 to drop in a H67 board for my SSD endurance testing rig. After playing with it for a while, I think it's well worth the premium the CPU is going for over MSRP. I could see just about every one I know using a G530 and thinking it's the greatest thing ever. The problem with SB Celerons and Pentiums is the motherboards. H61 boards are just not that good, and H67 boards are a little too expensive for a $50 processor. I already had a Biostar TH67+ laying around, and the system is now sitting in my entertainment center trying to put a SSD in the dirt at the rate of over 10.5TB a day. If Intel actually cared about what I want, they'd release a i3 K series as that's the SB I'd really like to see. I considered getting an i3, but I couldn't justify spending $130 for a processor that will spend it's entire life at idle putting SSDs to the sword.
  • Dustin Sklavos - Tuesday, November 8, 2011 - link

    Yeah, the PSU was comped. That's why I'm using it. 1.2kW is most definitely nuts. ;)
  • jabber - Tuesday, November 8, 2011 - link

    Yeah we really need a manufacturer to bring out the ultimate baddass 450W PSU that delivers top quality and most of us can use that instead of these frankly ridiculous mega supplies we feel we need to buy.

Log in

Don't have an account? Sign up now