An SSD State of the Union Update

I'm very pleased with the level of acceptance of SSDs today. When the X25-M first hit the market and even for the year that followed, any positive SSD recommendation was followed by a discussion of how many VelociRaptors you could RAID together for the same price as one SSD. Now we have an entire category of notebooks that come standard with some degree of solid state storage. End users are much more accepting of SSDs in general, aided by the fact that prices have finally dropped very close to the magical $1/GB marker (a boundary I expect us to finally cross by the end of 2012).

Today's SSDs are not only more prevalent than those we were reviewing just a couple of years ago, they're also a lot better. While the first SSDs still had difficulties competing with mechanical storage for sequential transfers, modern SSDs are several times faster even in the most HDD-friendly workloads. The implementation of technologies such as TRIM helps ensure the performance degradation issues of the very first drives are less likely to be encountered by anyone with a normal client workload.

Although it helped shape the client SSD business, Intel's drives are no longer the only option for performance and reliability. There are good, reliable SSDs from companies like Micron and Samsung that can easily hang with their Intel competitors. And if you're willing to live on the bleeding edge for the promise of the absolute best performance, there's always SandForce.

The client SSD space may not be mature, but I'm happy with the current state of things. With the exception of the ultra low price points, if you want an SSD, there's a solution on the market for you today.

Going forward, I'm not expecting a ton of change in the near term. Intel's Cherryville SSD has been delayed. This is the long awaited SandForce based drive from Intel. I suspect the delay has to do with Intel working through bugs in SandForce's firmware, but its efforts should hopefully make the platform more robust (although it remains to be seen if any of Intel's efforts are ported back into the general SF codebase).

In the first half of next year we'll see the first 20nm IMFT NAND shipping in client SSDs. The smaller transistor geometry will eventually pave the way for cheaper drives, although I wouldn't expect an immediate drop in prices. At the very least we'll see firmware updates enabling 20nm NAND support, although we may see the introduction of some new controllers as well. We're going to be pretty limited in terms of performance gains until ONFI 3.0 based controllers/NAND show up in early 2013. I expect the next 12 months to be more about driving enterprise SSDs and bringing down the cost of consumer drives.

The Topic At Hand: OCZ's Octane

Now for the reason we're all here today. Earlier this year OCZ acquired Indilinx, one of the first SSD controller makers to really make a splash in the enthusiast community. Ever since OCZ entered the SSD business it wanted to guarantee its independence by securing exclusive rights to a controller. OCZ initially did so by buying up all available inventory, first of Indilinx controllers, then of SandForce controllers. That strategy would only work for a (relatively) short period of time as the controller vendors sought to expand their market by selling chips to OCZ's competitors. A few slip ups on the roadmap and Indilinx was ripe for acquisition. OCZ stepped up to the plate and sealed the deal. Several months later, OCZ debuted its first drive based on an unreleased, exclusive Indilinx design: Octane.

Although Octane didn't set any performance records, it was competitive. Performance was definitely current gen, giving OCZ an in-house alternative to SandForce. There was just one issue: OCZ only sent out 512GB Octane review samples. SSDs get a good amount of their performance by executing reads/writes in parallel across multiple NAND devices. Higher capacities have more devices to read/write in parallel, and thus generally deliver the best performance. The greatest sales volume is of the lower capacity models - they're cheaper to own and NAND prices are falling quickly enough that investing in a 512GB drive rarely makes financial sense.

OCZ Octane Lineup
  1TB 512GB 256GB 128GB
NAND Type 25nm Intel Sync MLC 25nm Intel Sync MLC 25nm Intel Sync MLC 25nm Intel Sync MLC
NAND 1TB 512GB 256GB 128GB
User Capacity 953GiB 476GiB 238GiB 119GiB
Random Read Performance Up to 45K IOPS Up to 37K IOPS Up to 37K IOPS Up to 37K IOPS
Random Write Performance Up to 19.5K IOPS Up to 16K IOPS Up to 12K IOPS Up to 7.7K IOPS
Sequential Read Performance Up to 560 MB/s Up to 535 MB/s Up to 535 MB/s Up to 535 MB/s
Sequential Write Performance Up to 400 MB/s Up to 400 MB/s Up to 270 MB/s Up to 170 MB/s
MSRP TBD $879.99 $369.99 $199.99

OCZ finally sent out a 128GB Octane, which I promptly put through our standard test suite.

The drive still uses sixteen IMFT synchronous NAND devices. In this case each package features 64Gb (8GB) of 25nm MLC NAND on a single die. You may remember from our original review of the 512GB Octane that the Indilinx Everest controller supports 8-channels, but pipelining read/write requests to multiple devices per channel is supported.


Look ma, no muxes!

Gone from the Octane's PCB are the TI muxes that we found on the 512GB version. With the only difference between these drives being their capacity, it's likely that the muxes were used to switch between NAND die/packages. The 512GB version has 4x the number of NAND die than the 128GB version, and it's possible that the Everest controller is only capable of directly communicating with 16 or 32 die on its own. An external mux per channel would allow OCZ to scale capacities much further.

Other than the absent muxes and a change in PCB color, the 128GB Octane is no different than the original 512GB drive we reviewed. The drive does ship with a newer firmware revision:

The updated firmware doesn't do much for performance, although it does apparently fix a number of bugs that existed in the previous version. I haven't seen any mass reports of significant issues with the Octane, although it is still pretty new. Let's hope the trend continues.

The Test

CPU

Intel Core i7 2600K running at 3.4GHz (Turbo & EIST Disabled) - for AT SB 2011, AS SSD & ATTO

Motherboard:

Intel DH67BL Motherboard

Chipset:

Intel H67

Chipset Drivers:

Intel 9.1.1.1015 + Intel RST 10.2

Memory: Corsair Vengeance DDR3-1333 2 x 2GB (7-7-7-20)
Video Card: eVGA GeForce GTX 285
Video Drivers: NVIDIA ForceWare 190.38 64-bit
Desktop Resolution: 1920 x 1200
OS: Windows 7 x64

 

Random & Sequential Read/Write Speed
POST A COMMENT

38 Comments

View All Comments

  • daos - Thursday, December 29, 2011 - link

    I recently purchased this drive from the egg and I love it. Very reliable and not one blue screen. This is coming straight from a Sandforce 2281 Corsair Force GT 60GB that would blue screen sitting idle. That drive drove me crazy. Ill never go back to another Sandforce. So far so good. Been running this drive for abourt a month now. Reply
  • gamoniac - Thursday, December 29, 2011 - link

    Anand,
    Last October, you reviewed Kingston's SSDNow V+100 128GB (with Toshiba controller) and gave it a pretty high mark. It performed admirably under both light and heavy Anand Benchmark. A couple months back, the new SSDNow V200 is out, with JMicron controller and better specs than the V+100. I personally own two of each model but the benchmarks I have taken left me puzzled as to what to think about the newcomer. The random read/write department is great but the sequential read/write department is way bad, despite of the 6Gbps specs. I personally thinkg V+100 is way better and feel quite a bit ripped off by V200.

    There is no reviews out there for V200 yet and detail info is hard to find. Do you think you can shed some light on the latest from Kingston? Thanks much, and happy new year.
    Reply
  • erple2 - Friday, December 30, 2011 - link

    Wasn't there a firmware update that was released for the M4's that substantially boosted speeds? I seem to remember that happening after the 256GB drive was released/reviewed. Reply
  • erple2 - Friday, December 30, 2011 - link

    Meep. Nevermind. I just re-read the article you linked. Reply
  • johnf1285 - Friday, December 30, 2011 - link

    So at what point can we expect to have this SSD turn into a brick just like every other OCZ SSD that I've ever owned? Reply
  • chasM - Sunday, January 01, 2012 - link

    Sorry to say it, but all the prices from newegg,amazon, and Compusa are for a different drive. That model is more in the $170 range. Reply
  • LoosCarl - Sunday, January 01, 2012 - link

    Get OCZ Octane SSDs from Amazon, if you missed it: http://cl.lk/21hkw07 Reply
  • binqq - Friday, January 06, 2012 - link

    Our Website: ===== www fashion-long-4biz com ====
    Our main product list is as follows:
    Reply

Log in

Don't have an account? Sign up now