Introduction

SandForce sets aside more NAND capacity than most controllers for spare area. While Intel, Marvell, Samsung and others default to ~7% of total NAND capacity for spare area, SandForce is almost double that. The difference boils down to RAISE, SandForce's NAND redundancy algorithm that requires the consumption of a full NAND die. The original idea was that RAISE and SandForce's DuraWrite technology could allow SSD vendors to use cheaper, less reliable NAND without any impact to the end user. It seems as though no one was willing to risk using anything but the best NAND, so we never really saw this feature exploited. A bit over a month ago, ADATA released their XPG SX900 series. It utilizes the oh-so-common SF-2281 controller but unlike other SandForce SSDs, RAISE is disabled - giving the end user more usable space.

Maximizing SandForce Capacity - How it's done

When an SSD is marketed as for example 120GB, it must have 120GB of usable space (before formatting, of course). However, the advertised capacity does not always reflect the raw NAND capacity. Both 120GB and 128GB SSDs actually have 128GiB of NAND onboard. Notice that GB and GiB are not the same. As these two are easily confused with one and another, let's revisit the topic quickly.

Giga is a prefix for billion or 10^9. That means one Gigabyte is 1,000,000,000 bytes. Gibi, on the other hand, is a prefix for 1024^3, or 2^30. Do the math and one Gibibyte works out to be 1,073,741,824 bytes. The confusing part here is that Windows uses Gibibytes for capacities but with the GB abbreviation. (As an aside, Microsoft and others have used "GB" for 2^30 some time, and "Gibibytes" and the other binary SI prefixes only came into being in 1998.) That's why we often say Gigabytes although we really mean Gibibytes. Under Windows, a 128GB SSD is actually shown as a 119GB drive, although in reality it's 119GiB.

As SSDs capacities are advertised in Gigabytes, there is always some "hidden" space thanks to Gigabyte to Gibibyte translation. A 120GB SandForce SSD has ~17.4GB or 12.7% of space that is inaccessible by the end-user. What is that space used for then? Two words: RAISE and over-provisioning.

RAISE (Redundant Array of Independent Silicon Elements) uses the capacity of one NAND die (8GiB for 2x-nm NAND) for parity data. Hence you can lose up to a full NAND package worth of data without losing anything from the user's standpoint. While RAISE is optional, all SandForce SSD manufacturers have enabled it on +120GB drives thus far. 60GB SSDs have RAISE disabled because the user accessible space would be only ~56GB with 8GiB for RAISE and ~7% for over-provisioning.

Let's illustrate this situation by looking at how the space in a 120GB SSD is used. RAISE needs a full NAND die so that's 8GiB which needs to be substracted from the raw 128GiB. We are at 120GiB now. As 120GB is user accessible space, that needs to be substracted as well, which means the space left for over-provisioning is ~8.8GB or 6.9%.

So, now we know how the space in a typical SandForce SSD is allocated, but what exactly has ADATA disabled or decreased to achieve a higher capacity? An SSD cannot work without over-provisioning because it would have no space to do garbage collection, wear leveling, and bad block replacement. 0% OP is impossible as the drive could not function if it was filled. That leaves us with RAISE. ADATA has simply disabled RAISE to gain the extra 8GiB and make 8GB of it user accessible (the remaining ~0.6GB is used for OP to keep the OP percentage the same).

And that's it. There are no extra tricks, no extra NAND onboard, and no special controller or other magic. All SF-2200 series controllers support a RAISE-disabled mode, and ADATA is simply the first one to employ it on a drive larger than 64GB. This actually brings us to the next question: What has ADATA done with the 64GB drive?

60GB SandFroce drives already have RAISE disabled because with 8GiB for RAISE and 7% for OP, the usable capacity and hence advertised size would only be 56GB. When RAISE is disabled, there is actually 12.7% left for OP on a 60GB SF drive. ADATA has simply decreased the amount of space dedicated to OP to 7%, which yields a usable capacity of 64GB (or 63.9GB to be exact).

According to SandForce, RAISE is not even necessary for consumer workloads and the built-in 55-bit BCH ECC engine should be effective enough for error correcting. Personally, I would rather lose a small proportion of capacity to prevent potential data loss, but everyone's point of view is different. In my opinion, if you need the extra capacity that one NAND package provides, then your SSD is too small to begin with. It's always a pain in the neck to deal with a drive that's nearly full, especially if it's your boot drive.

The ADATA XPG SX900

ADATA sent us a 128GB review sample. Below is the specification table for the XPG SX900 family:

ADATA XPG SX900 Specifications
Model 64GB 128GB 256GB 512GB
Raw NAND Capacity 64GiB 128GiB 256GiB 512GiB
User Capacity 59.6GiB 119.2GiB 238.4GiB 476.8GiB
Number of NAND Packages 8 16 16 16
Number of Die per Package 1 1 2 4
Sequential Read 550MB/s 550MB/s 550MB/s 540MB/s
Sequential Write 510MB/s 520MB/s 530MB/s 465MB/s
4K Random Read 15K IOPS 20K IOPS 39K IOPS 55K IOPS
4K Random Write 87K IOPS 88K IOPS 90K IOPS 47K IOPS
Price $110 $170 $330 $670

Performance is exactly what you would expect from a SF-2281 drive. RAISE does not impact performance so this is not surprising.

Best Online Price Comparison (5/22/2012)
  60/64GB 120/128GB 240/256GB 480/512GB
ADATA XPG SX900 $90 $160 $300 $610
Plextor M3 $119 $156 $279 $650
Crucial m4 $80 $129 $220 $535
Intel 520 Series $115 $169 $330 $819
Samsung 830 Series $85 $130 $285 $659
OCZ Agility 3 $70 $120 $210 $500
OCZ Vertex 3 $85 $130 $250 $660
OCZ Vertex 4 N/A $140 $290 $640
Mushkin Enhanced Chronos $68 $103 $200 $450 

Pricing is not bad but could definitely be more competitive. The SX900 is cheaper than the Intel 520 Series while offering more capacity, but the Crucial m4, Samsung 830 Series, and OCZ Vertex 3 still beat it for most capacities. The Crucial m4 and Samsung 830 Series in particular are the two SSDs that you need to beat in order to succeed--they both offer powers-of-two capacities and seem to be very reliable, and the Samsung 830 Series in particular is also one of the fastest SSDs on the market.

I also decided to include Mushkin in the comparison because many of you have been speaking of their drives in the comments. I won't go in-depth about Mushkin right now, but the Chronos series uses a SandForce SF-2281 controller and asynchronous Micron NAND, which is very similar to OCZ's Agility 3.

It's good to keep in mind, however, that SSD prices fluctuate a lot as sales come and go. I started with the table from our Corsair Performance Pro review, but then widened our search criteria to include other online vendors; there have been plenty of changes just in the past week or so. If you are buying a new SSD, my advice would be to follow the prices for at least a few days, as you can easily save $20 or more by doing so.

As we are dealing with slightly different capacities due to the fact that most SandForce SSDs have RAISE enabled, the best way to look at this data is to compare the price per GB:

64GB SSD Price per GB Comparison

The 64GB model is in the middle of the pack in terms of pricing, basically matching the Vertex 3. The Intel SSD 520 and Plextor M3 are both substantially more expensive per GB, which is not where you want to be for a "value" capacity SSD. Given that factor, the Mushkin is currently the drive to beat for 60/64GB.

128GB SSD Price per GB Comparison

The 128GB SX900 doesn't do very well at 128GB, dropping further down our charts. Price per GB is higher than the other options--again, with the exception of the Intel 520. Even though the SX900 has 8GB more usable space, in terms of value you'd be much better off with something like the Samsung 830, Crucial m4, or the Chronos and Agility 3.

256GB SSD Price per GB Comparison

At 256GB, the trend continues with the SX900 again only offering better "value" (not taking into account firmware and reliability factors) than the Intel 520. It's only slightly more than the Vertex 4 and Samsung 830, but again we're looking at the same capacity for those two drives.

512GB SSD Price per GB Comparison

Only at 512GB does ADATA finally manage to place in the top half of our pricing charts. At these capacities, sales volume is much lower due to the overall high pricing, but outside of the Agility 3 and Chronos (which use slightly slower asynchronous NAND), the SX900 is the least expensive SF-2281 based high capacity SSD.

The drive comes with compact packaging. There is a 3.5" desktop bracket included along with mounting screws and a quick installation guide. There is no software CD included but ADATA offers a free Acronis True Image HD download, which is a handy backup/cloning utility. The 3-year warranty that ADATA gives is pretty standard for an SSD, but it could be better as for example Intel and Plextor offer 5-year warranties. The front side of the drive is covered by a big sticker that has ADATA's logo, the model number, and the capacity of the drive.

When we take the drive apart and see what's inside, there's not much out of the ordinary. There are only four screws keeping the whole package in place. It's not unheard of but the typical approach is to screw the PCB on the bottom part of the chassis and then screw the bottom part of the chassis to the top part.

On the actual PCB, there are sixteen 25nm Intel MLC ONFi 2.x (synchronous) NAND devices, eight on each side. Since this is a 128GB drive, it means all NAND devices consist of a single 8GiB die. As expected, the controller is SF-2281.

The Test

CPU

Intel Core i5-2500K running at 3.3GHz (Turbo and EIST enabled)

Motherboard

AsRock Z68 Pro3

Chipset

Intel Z68

Chipset Drivers

Intel 9.1.1.1015 + Intel RST 10.2

Memory G.Skill RipjawsX DDR3-1600 2 x 4GB (9-9-9-24)
Video Card XFX AMD Radeon HD 6850 XXX
(800MHz core clock; 4.2GHz GDDR5 effective)
Video Drivers AMD Catalyst 10.1
Desktop Resolution 1920 x 1080
OS Windows 7 x64

 

Random and Sequential Read/Write Speed
POST A COMMENT

58 Comments

View All Comments

  • kevith - Friday, June 08, 2012 - link

    I'l second that, I had exactly the same experience.

    Proper good job, mate!
    Reply
  • Whyaskwhy - Friday, June 08, 2012 - link

    My knowledge is very limited, can you show me how each SSD compares playing online games? I play Rift, SWTOR, World of Tanks,and will be playing GW2 when it comes out. Reply
  • JarredWalton - Friday, June 08, 2012 - link

    Generally speaking, SSDs only improve game and level load times, and even then the difference may not be that large. If you have a PC with 4GB RAM or more, SSDs are really about improving Windows performance and responsiveness as opposed to improving gaming performance. Reply
  • CeriseCogburn - Monday, June 11, 2012 - link

    Buy a sata3 6.0 (no matter your board speed), and you'll be fine - your frame rate won't go up a lot in games, although it does rise substantially (10%-40%) in some like flight sim (lots of tiny files to be accessed) and a bit in all others...

    What's good about them is not waiting for drive swapping IN GAME - so they can make a difference in responsiveness, it will be noticeable.

    If you are a benchmark freak make certain you buy a 120gig (or 128) not a 60gig (or 64) as the 60gigs bench poorly because of fewer ram chip channels, however windows 7 and all the general goodies and several (3) large games fit on a 60 or 64 just fine, but a 120/128 is barely 30 bucks more, so spend $100 and get a 120.

    The samsung 830's are hot but costly, I prefer 2281 sandforce asynchronus as they have several brand choices at the lowest of prices with excellent speed.

    If you have a single spindle drive non raid boot you won't be sorry at all. It appears on P45 chipsets and above, a triple raid boot zero stripe is required before equal performance responsiveness is met (on sata 2).

    So there you are - use the egg to see speed and click the reviews tab there and sort by most helpful you will see actual purchasers being quite helpful and giving their tested stats.
    Reply
  • jaydee - Friday, June 08, 2012 - link

    I don't know if it was really worth all the analysis on the pricing, as it fluctuates so much. At any given time, it seems that you can get a 120/128GB drive for ~$100-110, last week it was Samsung, this week it's Crucial, I've seen Plextor there too, and at least one SandForce drive seems to be there perpetually.

    Not that I'm complaining about the prices, its great for the consumers, but it places an impossible burden on a reviewer to evaluate the bang-for-buck, because it changes daily.
    Reply
  • Mathieu Bourgie - Friday, June 08, 2012 - link

    Thank you for the review Kristian.

    On a related note, I'm curious as to what happened to the Plextor M3 Pro review?

    You commented on May 14th, in the Corsair Performance Series Pro (256GB) Review article that the "review should be up next week at the latest." and yet here we are nearly a month later with a review of a different SSD.

    Thanks,
    Mathieu
    Reply
  • Kristian Vättö - Friday, June 08, 2012 - link

    It's been ready for about a month now. Only pricing table and final words are missing, but those can't be done until just before publishing. I wanted to get this review out of the way because I've had the drive for months. I asked Anand to test an updated 120GB SF drive for comparisons (it's been a while since we reviewed a 120GB SF drive, that's why), which took a bit longer than I thought (Anand is a very, very busy man ;-)).

    I will finish the M3P review this weekend and it will hopefully be up next week, depending on Anand's schedule and what else we have for next week (we don't want to post five reviews at once and then have nothing for the rest of the week. It's problematic when there are NDAs because they must go live ASAP, whereas other articles can wait).
    Reply
  • swx2 - Friday, June 08, 2012 - link

    Ah! I was looking for that review as well, but thanks for the explanation :) Reply
  • TwistedKestrel - Friday, June 08, 2012 - link

    I could have sworn that RAISE was disabled on the 120 GB Intel 520... and I thought I read that here, but I see no mention of it in Anandtech's review. Reply
  • Airkol - Friday, June 08, 2012 - link


    Reducing the over-provisioning and shutting RAISE off my give the consumer a few extra bytes of storage. But what it costs them is the life of the drive. The write amplification of the drive will increase since there is less area to manage wear leveling.

    This could reduce the life of the drive by 50%-75% depending on what type of data is being written.
    Reply

Log in

Don't have an account? Sign up now