In and Around the Cougar Challenger

I was actually surprised by the aesthetic of the Cougar Challenger. More ostentatious designs like this one tend to be more the province of Taiwanese companies like NZXT while European engineering tends to look more like Fractal Design's hardware. In my experience, Western consumers tend towards simpler designs that are functional, attractive in that "black goes with everything" kind of way, but still have a hint of style. Plastic is seldom well-received. Cougar actually offers the Challenger with accents in three colors: white, black, and orange. When they asked me which one I'd like to review, I felt like the white would go over best, but surprisingly they told me that the white one wasn't being marketed in the United States, and they felt the orange would go over better. I respectfully disagreed and if my hunch is correct, most of you do too.

Cougar is going for a jet-fighter kind of motif with the Challenger, with hard angles and honeycomb-patterned intakes on the front. That motif culminates with the flip-up cover over the power and reset switches at the top of the case, not too far off from Corsair's Vengeance C70. I've been mostly trying to stay neutral when judging the aesthetics of the cases I review, because I'm not necessarily an arbiter of taste and I have known people who prefer flashier designs like this one, but the Challenger's awkward angles and the way the fascia juts out in almost every direction just feels too busy. Flashier designs like NZXT's Phantom 820, those I can understand, but the Challenger seems like too much.

The side panel comes with the 120mm/140mm fan mount completely open; Cougar includes a magnetic snap-on filter that covers it up and seems to get the job done, but it's a clunky solution to a problem most other case manufacturers have already solved. That mount winds up being slightly more than a quarter of the diamond-shaped side window, but the rightmost corner of that window overlaps the drive cages while leaving the CPU area mostly covered up. When I was a windowed case kind of guy, I would've wanted to see the beefy cooler on the CPU.

Perplexing design decisions unfortunately continue when you remove the side panels. They're secured with thumbscrews, but are the types of panels that require lining up multiple small extrusions into grooves to slide onto place, making them frustrating to remove and replace. Interestingly, when you get inside the Cougar, the whole design becomes remarkably staid. You've seen this before: toolless optical drive bays, two drive cages (the top of which is removable), motherboard tray with holes for routing cables. Where Cougar gets it really right, though, is by including a peg in the center mounting hole for the motherboard tray, making installation much easier. The typical mounting points are also extruded and built into the tray itself, so no standoffs are required for basic ATX boards.

Where things get wonky again is with the removable center drive cage. The two screws used to secure it face towards the back of the case, making them incredibly awkward to get to. They're not thumbscrews either, just garden variety screws. I'm not sure why this was designed the way it was, but if you're going to remove the cage you'd better do it before the motherboard goes in, otherwise the innermost screw is going to be basically impossible to remove.

Reviewing the Challenger visually is tough because I don't want to rag on them, but the problem is that their internal design is extremely conservative while the exterior design is gaudy almost to a fault. There are good touches here and there, but while working on it I often found myself feeling like I'd seen everything here before. If you're just hawking cases by the truckload to boutiques like NZXT does, that's not necessarily an issue, but if you're a smaller company trying to get your foot in the door in the States, a design that doesn't actually stand out much from the garden variety gaming enclosures can be fatal.

Introducing the Cougar Challenger Assembling the Cougar Challenger
POST A COMMENT

40 Comments

View All Comments

  • geniekid - Monday, October 29, 2012 - link

    If they were targeting the younger market, they should have at least been consistent. The front and the main body look like they're from two different cases. They should've at least made gratuitous use of non-right angles, plastic, and jagged edges on the main body if they were selling this to young children building their own rigs. Reply
  • Geraldo8022 - Monday, October 29, 2012 - link

    I like the looks of it and I might buy one. After all I almost bought a Pontiac Aztek. Reply
  • piroroadkill - Tuesday, October 30, 2012 - link

    Don't knock the Aztek! The ideal vehicle for the budding meth cook.. Reply
  • just4U - Monday, October 29, 2012 - link

    Perhaps it's time to start sharing with these companies what are views are on a perfect case.

    For me I'd like something smaller along the lines of Silverstone's Temjin TJ08 but with a window to show off the build. Must have dust filters.. a removable motherboard tray would be nice (like the older lian-li's) Antec's usage (and coolermaster's) hard drive mounting system) generous space behind the motherboard for hiding wires.. Looks wise? should be more refined and tastefull. I like lighted fans but their something I prefer to put in myself if the build warrants it.

    Hits in the past for me were:
    Lianli PC60A
    Antec Super lanBoy (original not those horrors they released last year)
    Antec Sonata 1/2/3 (no .. it wasn't silent)
    CoolerMaster Storm Scout
    Corsair Carbite 600T
    Reply
  • just4U - Monday, October 29, 2012 - link

    oh btw.. it doesn't have to have alot of fans.. front back top make them easily accessable to. Reply
  • piroroadkill - Tuesday, October 30, 2012 - link

    So get a Fractal Design Define R4 with the windowed side panel. Done. Reply
  • piroroadkill - Tuesday, October 30, 2012 - link

    Here, even did the work to find it on newegg for you.
    http://www.newegg.com/Product/Product.aspx?Item=N8...
    Reply
  • just4U - Tuesday, October 30, 2012 - link

    lol.. there was no need. I am aware of Fractal Design's cases. We just started getting them here. The R4 is a nice case and priced fairly well but it has the door which is a star off in my opinion. I do however like their mini. It's very much on par with the Temjin from Silverstone. Both lack windows and while the silverstone does have a removable mb tray it's not really up to what some might be used to with older Lian-Li designs. Reply
  • eBob - Monday, October 29, 2012 - link

    I can only come up with one word for my reaction to this case. I didn't even bother to read the rest of the review. I can't see anyone over the age of 14 wanting this. Reply
  • Telset - Monday, October 29, 2012 - link

    Seriously are these the same people that made the cool cougar evolution case?
    I have the cougar evolution its awesome. But this is kinda ugly but probably looks better with 2 fans on the top to make it more uniform.
    Reply

Log in

Don't have an account? Sign up now