Fractal Design Node 304 mITX Case Review: Paving the Way to the Future
by Dustin Sklavos on November 23, 2012 12:01 AM EST- Posted in
- Cases/Cooling/PSUs
- Mini ITX
- Fractal Design
- mITX
Testing Methodology
For testing Mini-ITX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
| Mini-ITX Test Configuration | |
| CPU |
Intel Core i3-2120 (65W TDP) |
| Motherboard | Zotac Z68ITX-A-E |
| Graphics Card |
Intel HD 2000 IGP Zotac GeForce GTS 450 Eco (dedicated) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives | Kingston SSDNow V+ 100 64GB SSD |
| CPU Cooler | SilverStone NT07-1156 with Cooler Master ThermalFusion 400 |
| Power Supply | SilverStone Strider Plus 750W 80 Plus Silver |
Each case is tested with just the Core i3's integrated graphics as well as with a discrete graphics card. The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running four threads (three with a dedicated GPU) in Prime95 (in-place large FFTs) on the CPU, and OC Scanner (maximum load) is run when the dedicated GPU is installed. At the end of fiteen minutes, thermal and acoustic results are recorded. If the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
We try to maintain an ambient testing temperature of between 22C and 24C. Non-thermal test results aren't going to be directly comparable to the finest decimal point, but should be roughly comparable and give a broader idea of how the enclosure performs.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i3-2120.
- Thank you to Zotac for providing us with the Z68ITX-A-E motherboard and GeForce GTS 450 Eco.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- And thank you to SilverStone for providing us with the power supply and NT07-1156 heatsink/fan combo.
Facebook
Twitter
RSS
80 Comments
View All Comments
Grok42 - Friday, November 23, 2012 - link
I had the same thought about wishing the cable was shorter when looking at the main power connector all looped up in the screen shot. (I know you tried to make it clean Dustin!) I think you are on to something this wouldn't be a problem if they would standardize the modular connectors. Given that only a few manufactures sell different lengths it seems like something that everyone could agree on.yyrkoon - Tuesday, November 27, 2012 - link
Or, you could learn to solder, cut wires to proper length, and disassemble / reassemble the connector ends yourself. This requires a bit of experience but is not very hard. You could possibly even profit from it by following through with your own aftermarket idea personally. However, I would not count on becoming rich as the enthusiast computer market really is not that large.Dandyman - Sunday, December 2, 2012 - link
Found this rig on some Finish online store:http://www.verkkokauppa.com/fi/product/15996/dhqxv...
Proof of concept :-)
martyrant - Friday, November 23, 2012 - link
I admit I wasn't paying attention to the size of the PSU he was using...lol, and yeah, even with a 670 or a 7950 a lower watt 500 psu would be fine for a build this size. So I guess I'll retract my complaint about the PSU... ;)Still glad to see that pesky 5.25" drive gone tho!
Grok42 - Friday, November 23, 2012 - link
I was paying attention but given how everything is orientated with the PSU positioned a bit toward the middle of the case to allow for the power lead to run to the back, I worry that even with the 4" PSU I plan on using instead of the 7" one reviewed, it will still be a very tight fit. It all depends on how the modular connectors protrude from the back of the PSU and what they hit.May the 5.25" bays never return!
Guspaz - Monday, November 26, 2012 - link
The absence of a 5.25" bay is kind of a critical flaw... If they had a slot for a slim drive that might be excusable, but as it stands the system has no way to play bluray films, or install software from CD/DVD.You can get away without an optical drive on a notebook, but not a desktop.
yyrkoon - Tuesday, November 27, 2012 - link
external . . ..krumme - Friday, November 23, 2012 - link
Okey, so what 7950 card and ps do i use when using the usual intel plus sing ssd stuff?Koppit - Friday, November 23, 2012 - link
I have one of these cases as my HTPC. Just wantetd to say I used a Corsair CX600Wand with the help of some cableties I got room for my Sapphire 5870 vapor-x. So there is room for larger cards. I really like this case and would not have any problems recommending it, if you just get a small PSU with few cables.
just4U - Friday, November 23, 2012 - link
A way around the cable problems (imo) is use modular powers supplies that employ the ribboned cables. Their relatively easy to work with and tuck away.