When we reviewed Intel's SSD DC S3700 I started looking at consistency of IO latency, an area that Intel's latest controller specifically targeted for significant improvement. In our review of OCZ's Vector I took the same methodology and applied it to the current crop of high-end consumer drives. As I believe improving IO consistency is a good optimization practice for all SSDs, the hope is that we'll see improvements in this area on both client and enterprise focused drives.

In the comments thread for the Vector review, jwilliams4200 posted some very interesting data. The S3700 has 264GiB of NAND on-board but only exposes 186GiB of it (200GB advertised capacity) as user accessible storage, the rest is used as spare area to improve performance, consistency and endurance. Most client drives on the other hand only feature about 7% of their total NAND capacity set aside as spare area (256GiB of NAND, 238GiB of user storage). The obvious hypothesis is that a big part (if not all?) of the S3700's advantage in performance consistency is due to the large amount of spare area.

We've understood the relationship between spare area and write amplification for quite some time now. I borrowed the chart below from a paper published by IBM's Zurich Research Laboratory showing the relationship between write amplification and spare area for various workloads:


Write Amplification vs. Spare Area, courtesy of IBM Zurich Research Laboratory

With more spare area, write amplification is lower. The controller has more room and thus flexibility with running its defragmentation and garbage collection algorithms. The dreaded read-modify-write scenario is triggered less frequently as there's less space pressure thanks to additional spare area. If you're testing in a full-drive scenario, there's simply less data to keep track of when you've got more NAND set aside as spare area. This keeps internal data structure footprints smaller by default, which also improves performance.

It's because of this relationship between write amplification and spare area that we've always recommended setting aside 10 - 20% of your SSD and not filling it up entirely. Most modern controllers will do just fine if you partition the drive and leave the last 10 - 20% untouched. With TRIM support even the partitioning step isn't really necessary, but it does help from a data management standpoint. The real question is what's the relationship between spare area and IO latency/performance consistency.

To find out, I repeated jwilliams4200's tests. I took a bunch of 240/256GB drives and filled them to various percentages of their capacity, and performed our IO consistency test with an identical span of LBAs. The goal was to simulate worst case IO consistency while taking into account greater percentages of spare area.

The Tests

For this investigation I picked a couple of the most interesting, modern SSD controllers: Samsung's MDX controller from the SSD 840 Pro, Link A Media Devices' LM87800 controller from Corsair's Neutron and Barefoot 3 from OCZ's Vector. For all of these drives I used 256GB capacities. With the exception of the Neutron, all of the drives had ~7% of their NAND capacity set aside as spare area. The Neutron is a 240GB drive after its ~12% spare area.

The high level testing methodology remains unchanged from our S3700 review. Unlike in previous reviews however, I did vary the percentage of the drive that I filled/tested depending on the amount of spare area I was trying to simulate. The buttons are labeled with the advertised user capacity had the SSD vendor decided to use that specific amount of spare area.  If you want to replicate this on your own all you need to do is create a partition smaller than the total capacity of the drive and leave the remaining space unused to simulate a larger amount of spare area. The partitioning step isn't absolutely necessary in every case but it's an easy way to make sure you never exceed your allocated spare area. It's a good idea to do this from the start (e.g. secure erase, partition, then install Windows), but if you are working backwards you can always create the spare area partition, format it to TRIM it, then delete the partition. Finally, this method of creating spare area works on the drives I've tested here but not all controllers may behave the same way.

In our Intel SSD DC S3700 review I introduced a new method of characterizing performance: looking at the latency of individual operations over time. The S3700 promised a level of performance consistency that was unmatched in the industry, and as a result needed some additional testing to show that. The reason we don't have consistent IO latency with SSDs is because inevitably all controllers have to do some amount of defragmentation or garbage collection in order to continue operating at high speeds. When and how an SSD decides to run its defrag and cleanup routines directly impacts the user experience. Frequent (borderline aggressive) cleanup generally results in more stable performance, while delaying that can result in higher peak performance at the expense of much lower worst case performance. The graphs below tell us a lot about the architecture of these SSDs and how they handle internal defragmentation.

To generate the data below I took a freshly secure erased SSD and filled it with sequential data. This ensures that all user accessible LBAs have data associated with them. Next I kicked off a 4KB random write workload across all LBAs at a queue depth of 32 using incompressible data. I ran the test for just over half an hour, no where near what we run our steady state tests for but enough to give me a good look at drive behavior once all spare area filled up.

I recorded instantaneous IOPS every second for the duration of the test. I then plotted IOPS vs. time and generated the scatter plots below. Each set of graphs features the same scale. The first two sets use a log scale for easy comparison, while the last set of graphs uses a linear scale that tops out at 40K IOPS for better visualization of differences between drives.

The first set of graphs shows the performance data over the entire 2000 second test period. In these charts you'll notice an early period of very high performance followed by a sharp dropoff. What you're seeing in that case is the drive alllocating new blocks from its spare area, then eventually using up all free blocks and having to perform a read-modify-write for all subsequent writes (write amplification goes up, performance goes down).

The second set of graphs zooms in to the beginning of steady state operation for the drive (t=1400s). The third set also looks at the beginning of steady state operation but on a linear performance scale. Click the buttons below each graph to switch source data.

Impact of Spare Area
  Intel SSD DC S3700 200GB Corsair Neutron 240GB OCZ Vector 256GB Samsung SSD 840 Pro 256GB
Default
12% Spare Area - - -
25% Spare Area -
50% Spare Area - - -

I ran the most data on Samsung's SSD 840 Pro as it's likely going to be the most popular of the drives here. If you click through the various simulated capacities/spare area points you'll see the drive's performance consistency improves tremendously once you hit 25% spare area. The drive's IO consistency goes from a spread out mess to something that resembles a thickly painted line across the graph. At 50% spare area, the 840 Pro begins to lose that initial performance cliff and instead develops a much flatter curve. Compared to the S3700 there's still some obvious variation in IO latency (and thus performance) but it's far more controlled than in the default configuration.

OCZ's Vector behaves similarly. The individual IOs on the Vector with 25% spare area are more tightly grouped than on the 840 Pro in general, but you can see OCZ's periodic defrag routine kick in with regular blips that deviate below the curve.

The LAMD based Neutron is actually remarkably consistent even in its default configuration. I originally didn't include the Neutron but Kristian theorized that LAMD's enterprise experience could make for an interesting datapoint here. He was right. The Neutron remains one of the most consistent SSDs out of the box without dedicating any additional spare area to the controller. Even compared to Samsung's SSD 840 Pro at 225GB, the Neutron manages to deliver more consistent performance. The Neutron's curve tightens up at 25% spare area but there's still a good amount of variance. The LAMD defrag routines don't look as predictable/periodic as we've seen on other drives, including the S3700. I wonder if the controller is doing something a bit more dynamic here.

The next set of charts look at the steady state (for most drives) portion of the curve. Here we'll get some better visibility into how everyone will perform over the long run.

Impact of Spare Area
  Intel SSD DC S3700 200GB Corsair Neutron 240GB OCZ Vector 256GB Samsung SSD 840 Pro 256GB
Default
12% Spare Area - - -
25% Spare Area -
50% Spare Area - - -

The scale isn't different here, but we do get a better look at steady state consistency. The Neutron continues to impress, looking almost identical to the S3700 if you give up 25% of the drive's NAND to spare area. Samsung also does very well at 25% spare area, there's just a huge improvement there.

The final set of graphs abandons the log scale entirely and just looks at a linear scale that tops out at 50K IOPS. We're also only looking at steady state (or close to it) performance here:

Impact of Spare Area
  Intel SSD DC S3700 200GB Corsair Neutron 240GB OCZ Vector 256GB Samsung SSD 840 Pro 256GB
Default
12% Spare Area - - -
25% Spare Area -
50% Spare Area - - -

Zooming in and looking at a linear scale does show us that additional spare area alone isn't enough to deliver the degree of consistency that Intel's S3700 offers. The solution really has to be a combination of controller and spare area. It's also entirely possible that a controller that prioritizes IO consistency would be able to offset the need for significant spare area. That's definitely the case with Corsair's Neutron, and I'd assume that future derivaties of Intel's S3700 with standard MLC and less spare area will behave similarly. For most consumers this likely won't matter as minimum performance improves substantially once you hit 25% spare area for these drives, but enterprise customers with several if not dozens of SSDs in a RAID array will still benefit from the S3700's architecture.

Final Words

Delivering consistent performance is an important part of improving user experience. As Intel's SSD DC S3700 and Corsair's Neutron have shown, consistent performance is possible through a controller that prioritizes efficient and aggressive defragmentation. I do believe it is important for controller vendors to prioritize IO consistency in their controller and firmware designs.

For drives on the market today that don't already prioritize consistent IO, it is possible to deliver significant improvements in IO consistency through an increase in spare area. OCZ's Vector and Samsung's SSD 840 Pro both deliver much better IO consistency if you simply set aside 25% of the total NAND capacity as spare area. Consumer SSD prices are finally low enough where we're no longer forced to buy the minimum capacity for our needs. Whatever drive you end up buying, plan on using only about 75% of its capacity if you want a good balance between performance consistency and capacity.

POST A COMMENT

132 Comments

View All Comments

  • mayankleoboy1 - Tuesday, December 04, 2012 - link

    I too have a 256GB Vertex2. Would be interesting to know how to increase performanmce for older archs. Reply
  • Tjalve - Tuesday, December 04, 2012 - link

    I think some people are missing the point here. For client loads you wont see any diffrence at all. Theese tests are based on a full drive running a 4K Random write pattern at high QD. The only place that this scenario could happen in real life, is in a Server under high load for extended periods of time. Like a database server or a file server handling alot of clients at the same time.

    So you dont have to manually overprovion your drive. However if you do, the overall WA will be lower and the drive will last longer. But on the other hand you could just try not to fill you drive all the way.
    Reply
  • rrohbeck - Wednesday, December 05, 2012 - link

    Exactly. As long as you have some main memory free, your OS will buffer writes and you'll never know in a desktop like environment. Reply
  • Zink - Tuesday, December 04, 2012 - link

    No wonder you have so many complaints about IO consistency Anand, you torture your MBP SSD to the max daily. I don't think there are too many other enthusiast who run right to the point of getting disk space errors. I'm not so sure there is really any problem with SSD consistency for desktop use. Wouldn't statistics on max response time help us understand if there are any noticeable slowdowns? All of these drives are providing 25k IOs during the worst one second periods when filled reasonably. Unless there are some ridiculously long pauses in there I can't see how that would noticeably affect any workload. Reply
  • JellyRoll - Tuesday, December 04, 2012 - link

    Thanks for the article, this illustrates a point that i have come across when testing several SSDs.
    The Intel isnt that spectacular. The consistent I/O story is marketing hype, there are other enterprise SSDs that perform just as well, or much better.
    One can even take consumer SSDs and reach the same level of performance with similar amounts of OP.
    Will there be an adjustment to the glowing review of the Intel datacenter SSD? or perhaps some comparisons to other relevant enterprise SSDs so that users can see that in that space the Intel is merely run-of-the-mill, if not slower!, than other alternatives?
    Reply
  • Lepton87 - Tuesday, December 04, 2012 - link


    Will there be an adjustment to the glowing review of the Intel datacenter SSD?


    Of course not, just as GTX680 is still the fastest card on the market according to ananad. It was already slower then 7970GHz with launch drivers, but anandtech was one of a few sites to say otherwise.
    Reply
  • Shadowmaster625 - Tuesday, December 04, 2012 - link

    So is it better to set your partition to 75% when you install windows, or simply keep the full partition but never fill the drive past 75%? Is there any difference between these two methods? Reply
  • Tjalve - Tuesday, December 04, 2012 - link

    No. Reply
  • M477 - Tuesday, December 04, 2012 - link

    These test were all 256 GB drives. But if you have a 512GB drive, do you still need to leave 25% free (128 GB), or is it the amount of space (approx 64 GB) that is important?

    I would have thought it is the amount/size of OP space that would be important - not the %.

    Might it also explain why advertised drive speed improves with capacity (all with the same 7% OP).
    Reply
  • phillyry - Monday, December 10, 2012 - link

    Very good point. I second that question. Reply

Log in

Don't have an account? Sign up now