While Anand deals with the detailed analysis of the Haswell CPU architecture and performance, a CPU is almost nothing without an accompanying chipset to provide connectivity and an interface with which to interact with the CPU.  For our Z87 launch article all the major manufacturers sent us a motherboard to test, around the $200 mark, in order to showcase what we as users can expect from them in a reasonable price bracket.  We also have managed to get hold of more of the nitty-gritty behind the Z87 platform, which has several features worth noting and talking about.

The Z87 Chipset

As consolidation occurs with parts of the system into the CPU, there could potentially be fewer and fewer opportunities for motherboard manufacturers to express their own individual take on each motherboard.  Nonetheless, this has not stopped them coming up with gaming ranges, overclocking ranges, and using any number of controllers to provide additional functionality above and beyond the native Z87 chipset.  Here is the chipset diagram for Z87 in a nutshell:

The first things to note are the lane allocations – we have a similar layout to Panther Point (Ivy Bridge) for 1x16, 2x8 or 1x8+2x4.  The processor now takes control of the digital display outputs rather than the PCH, and can also deal with DDR3L memory.  Natively the processor is set at 1333/1600 MHz, however from internal testing and from manufacturers almost every K-series SKU should handle DDR3-2400 at stock CPU speeds with ease.

On the chipset itself, we have a few new features – it is worth noting that it says ‘up to 8x PCIe 2.0, up to 6x USB 3.0 and up to 6x SATA 6 Gbps ports.  This is a feature new to the consumer chipset range called Flex I/O.

Flex IO

Typically with a motherboard chipset we have a fixed number of SATA ports, a fixed number of PCIe lanes and a fixed number of USB ports.  This is due to the fact that the PCH has them automatically wired in, and it is up to the motherboard manufacturer to connect the traces up within the Intel specified tolerances.  Flex IO changes all this, into a mini-FPGA style arrangement, where several of the ports available can be configured to SATA 6 Gbps, PCIe or USB 3.0.

We get a total of 18 points in the architecture, of which four are USB 3.0, six are PCIe and four are SATA 6 Gbps.  That leaves two pairs of two – the first pair can be assigned to USB 3.0 or PCIe, and the second pair can be assigned to SATA 6 Gbps or PCIe.  The only limitation is that there can only be a maximum of eight PCIe 2.0 slots.

This allows motherboard manufacturers to position their SKUs very nicely – the PCIe 2.0 lanes can be split into extra USB 3.0 or SATA 6 Gbps controllers as well, meaning that on high storage platforms the manufacturer can go full out SATA 6 Gbps with controllers.  There also remains the possibility that a motherboard manufacturer could assign all eight PCIe 2.0 lanes into a PCIe slot, giving that slot better bandwidth for multi-GPU scaling (at the expense of not being able to use those lanes for anything else such as PCIe x1).

The Intel Z87 Motherboard

Intel is still in the motherboard business for a couple of years, despite announcing their intention to leave the consumer motherboard market space.  Like AMD, when it comes to media preview kits, they may call upon one of the motherboard manufacturers to supply the motherboard to send out of reviews.  Until that day, we still get motherboards from Intel.  Our Intel motherboard sample is in Anand’s hands right now for the CPU and IGP end of our motherboard coverage, but it looks a little something like this:

The reason why I bring up the Intel DZ87KLT-75K is that we have access directly to its chipset diagram:

Perhaps annoyingly, this is a little misleading – the chipset diagram suggests that we have a 20 PCIe lane processor when in actual fact the motherboard is an x8/x4/x4 layout.  We can tell this because the PCH has all the 8x lanes being used – four for a Thunderbolt controller, two for Gigabit Ethernet, and one each for a USB 3.0 controller and a SATA 6 Gbps.  This allows the motherboard to have a total of eight USB 3.0 and eight SATA 6 Gbps, which from what we have seen in our Z87 motherboard preview, is not too far-fetched.

What about H87 and others?

Intel is launching several chipset variations for Haswell processors, including H- for consumers as well as B- and Q- variants for business.  The salient comparisons are as follows:

With H87 we lose CPU multiplier overclocking and multiple GPU configurations from the PEG lanes on the CPU.  H81 takes it a little further, restricting displays, limiting the PCIe to Gen 2, and removing features such as RST, SRT and Flex IO.

Business chipsets follow on from the H87 chipset in terms of overclocking/GPU allocations, but typically come with business level features and support.  For example, vPro needs a Q87 chipset, and B85 has fewer USB ports in total as well as not being iSIPP (Intel Stable Image Platform Program) eligible.

What about Display Configurations?

With “Shark Bay” (the platform combining a Haswell CPU and Lynx Point 8-series PCH), the ecosystem has moved the digital displays from the PCH to the CPU, leaving the VGA behind.  This allows the system to integrate the S0ix power states a lot better than before, reducing idle power consumption and improving wake from sleep times (a main goal of Shark Bay).  It also in some way allows Intel to have more control over the digital display allocations, especially dealing with WiDi.  The platform now looks like:

Arguably this may result in increased power consumption on the CPU, at the benefit of lower power consumption at the PCH (down 10%) which has to have a heatsink attached.  But the digital ports, like with Panther Point, can be configured to a wide variety of digital outputs in a similar way to Flex IO.

This is all from the processor itself of course – users with discrete GPUs will have different options from the GPU side of the equation. 

What Did I hear about an Integrated Voltage Regulator?

As part of the consolidation, Intel is moving the voltage regulators onto the CPU to deal with various parts of the system onto the CPU itself.  This means from a user perspective there should be less variation from the motherboard aspect in dealing with voltage inputs and quality, as only voltage needs to be pushed into the CPU for all the CPU features.  Nonetheless it still means users will have to negotiate the internal voltages such as VCore in order to provide good overclocks.  For extreme overclock users, it adds another element into potential CPU variation, meaning that searching for a good CPU may be a little bit more difficult.

Anand has gone into greater detail in his Haswell coverage, but this also means that the integrated GPU can increase its speed and voltage without having to ‘wake’ the CPU part of the system up from a low power state unless needed.

Enough Already, Where Are The Motherboards?

For our first Haswell motherboard review, I asked the main manufacturers of such wondrous items to supply me with a motherboard around the $200 mark which would form the cornerstone of the high-end mainstream sales.  Both our Sandy Bridge and Ivy Bridge initial coverage worked very well at this price point, and I begged the manufacturers to send samples to me as early as possible to we could pass more details on to our readers.  While deadlines are tight, we managed to take on the following:

 - Gigabyte Z87X-UD3H (MSRP $180, US Sale to $170)
 - MSI Z87-GD65 Gaming (MSRP $190)
 - ASRock Z87 Extreme6/AC (MSRP $220, US $20 Rebate for June)
 - ASUS Z87-Pro (MSRP $210)

We also have another set of ASRock motherboards in to test, including the OC Formula and mini-ITX models, but unfortunately time to review these before launch day ran out, so they will be covered over the coverage.

First up to review is the motherboard that arrived in our offices first for testing – the Gigabyte Z87X-UD3H!

Gigabyte Z87X-UD3H Overview, Visual Inspection, Board Features
POST A COMMENT

56 Comments

View All Comments

  • Mr Perfect - Friday, June 28, 2013 - link

    My guess is it's just new vs old products at this point. The Z77 boards are old news and have had a year to fall in price. Meanwhile, the Z87s are shiny new toys that some people will pay a premium for. Reply
  • Rob94hawk - Thursday, June 27, 2013 - link

    "As it stands the MSI BIOS looks like a higgledy-piggledy jumble to a new overclocker."

    Going from X38/775 to this I still haven't figured out what everything does.
    Reply
  • nsiboro - Friday, June 28, 2013 - link

    Ian, kindly provide info/links to ASUS Z87-Pro 3xxx series BIOS.
    The website product page (download) is only showing 1xxx series BIOS.

    Thanks.
    Reply
  • blackie333 - Friday, June 28, 2013 - link

    Could someone please check/confirm whether USB 3.0 S3 wakeup bug also affects devices connected via additional(ASMedia 1074) onboard USB 3.0 hub ports available on Asus Z87-PRO stepping C1 board?
    Some people are suggesting that only USB 3.0 ports directly connected to Z87 chipset are affected by the bug.
    Reply
  • chizow - Friday, June 28, 2013 - link

    The PCIe lane config was the biggest deciding factor for me. I will only ever run 2-way SLI, so I wanted to maintain x8/x8 config for my 2x primary GPUs but wanted the flexibility of that 3rd slot for a PCIe SSD or PCIe PhysX card.

    Only the Asus and Gigabyte options offered that lane config, from what I saw both the MSI and Asrock designs go with x8/x4/x4 3.0 rather than x8/x8 3.0 + x4 2.0

    The Gigabyte UD range was pretty vanilla, but I was OK with that, the Asus boards, although solid, offered a lot of features I would never need or use, like Wi-Fi.

    I ended up with the Gigabyte Z87X-UD4 as it was cheaper than the comparable Asus offering Z87-Pro by quite a bit.
    Reply
  • pandemonium - Saturday, June 29, 2013 - link

    I love the thoroughness of these articles. Excellent job, guys!

    "ASUS’ reasoning is such that some of the Haswell i7-4770K CPUs, the ones that only just get into this category, will throttle the CPU speed when using the default Intel CPU cooler when MCT is enabled."

    Who - buying a 4770K - will be using a stock cooler? What kind of rationality is that garbage? >.>
    Reply
  • blackie333 - Saturday, June 29, 2013 - link

    There can be some, maybe those waiting for a better cooler. But the question is why Intel is including cooler which isn't capable to cool the CPU and we still have to pay for it? It should be able to do it's job at least on default frequency.

    Anyway this problem is IMHO more an effect of Haswell heat transfer issue than poor quality of the stock cooler. If Intel could fix the CPU overheating issue the cooler should be good enough.
    Reply
  • ven - Sunday, June 30, 2013 - link

    why is that PCIe hub is present, many will prefer having a single device that will utilize all the bandwidth than having multiple devices choking with shared bandwidth, six SATA 6Gpbs is enough for most, with flex i/o and that hub removed gives x7 lanes and given this a Desktop board,msata will not be missed that much, so we can get tri-way SLI, i am little surprised that no manufactures choose this configuration. Reply
  • HexiumVII - Sunday, June 30, 2013 - link

    Hey Ian! Maybe run the Asrock Z87 in water and let us know how waterproof it is! Reply
  • Hrel - Monday, July 08, 2013 - link

    You guys DO talk about how motherboard manufacturers have less and less to do now; with Intel moving more and more things onto the CPU die. Yet for some reason you still fail to ask WHY motherboards are getting MORE expensive. Not less. I got an AMAZING motherboard with SLI and massive overclocking ability that's rock solid back in 2007 for 125 dollars. Yet now that the northbridge isn't even ON the motherboard anymore I have to pay 175 for the SAME level of performance... WTF is that! Reply

Log in

Don't have an account? Sign up now