The Real Conroe Successor: Clarkdale & All You Need to Know about Westmere
by Anand Lal Shimpi on September 24, 2009 6:00 PM EST- Posted in
- CPUs
The First H57 mini-ITX Motherboard
Both micro-ATX and mini-ITX are being taken a lot more seriously now. With two-chip solutions commonplace on the desktop now, there's no reason we can't be building smaller motherboards:
Mini ITX H57 (left) vs. Mini ITX G45 (right)
You can expect this board to be available in Q1 2010.
Facebook
Twitter
RSS
96 Comments
View All Comments
Wolfpup - Friday, October 16, 2009 - link
Dual core CPUs in 2010, AFTER we've had quad core for three generations, and even have a fairly reasonably priced Core i7 in NOTEBOOKS now? Boooooring!cosminliteanu - Wednesday, September 30, 2009 - link
Hi,anybody know when Intel will add support for USB 3 and SATA 6 GB? And most important in which chipset/platform will be ?
Thanks.
NeBlackCat - Tuesday, September 29, 2009 - link
Once again AMD will be getting my money as I'm not being forced to buy two motherboards to get the CPU that I want now (Clarkdale) and it's immediate successor.
I'm sure you're gutted.
SFNR1 - Tuesday, September 29, 2009 - link
what PSU was being used?IKeelU - Monday, September 28, 2009 - link
I hope that mini-ITX is < 100$. I'll finally be able to upgrade from my existing atom board and its measly 2 SATA ports.cjs150 - Tuesday, September 29, 2009 - link
Exactly. Personally I am excited by this. I need to build a couple of things for the home network1. HTPC - this needs to be very very quiet. This new CPU and Mini ITX board looks spot on if (and it is a big if) Intel actually delivers on HD acceleration for both video and audio
2. Small home server to replace the ancient thing currently flogging its guts out. This looks close - low power is good but I have two big requirements. (a) standard PCI slot for my RAID card which is an 8 port SATA raid card (Broadcomm) which just works exactly as it should. (b) with all the HD streams 2 xGb ethernet ports would be nice to allow for future expansion (and yes I know it is overkill). Looks like the current minim-itx board fails on both
CrimsonFury - Thursday, October 8, 2009 - link
An 8 port SATA controller is very limited via standard PCI.Even a PCI-E x1 slot would double the bandwidth (x4 or or x8 would be better)
Just use one of the mini-ITX boards that has a PCI-E x16 slot and check a PCI-E sata controller in there.
Holy Smoke - Saturday, September 26, 2009 - link
Am I the only one who finds the tock-tick thingy retarded?It's the wrong sequence, dammit! It's like an army going 3-4-1-2 fer chrissakes!
2good2btrue - Monday, September 28, 2009 - link
Okay, how is this the wrong sequence?They optimize the circuit design, from a known good/working design, then they optimize it at the smallest current size possible.
How is this retarded?
strikeback03 - Monday, September 28, 2009 - link
I'd guess he is arguing that the tick should be the new microarchitecture, and the tock should be the shrink of that.