• What
    is this?
    You've landed on the AMD Portal on AnandTech. This section is sponsored by AMD. It features a collection of all of our independent AMD content, as well as Tweets & News from AMD directly. AMD will also be running a couple of huge giveaways here so check back for those.
    PRESENTED BY

AMD workstation

Anand thoroughly reviewed AMD's latest Piledriver-based "Vishera" CPUs upon their launch a few months ago. Priced at $130, the FX-6300 hex-core model costs about as much as Intel's Ivy Bridge-based Core i3-3220. In terms of real-world workstation application performance (the details of which are presented in Anand's review), the FX-6300 bests the i3-3220 in a variety of tasks: Monte Carlo simulations in Microsoft Excel, multi-threaded video editing, software compilation in Visual Studio, and multi-threaded integer workloads such as those used in file compression/decompression. Compared to the i3-3220, the FX-6300's major weakness is its higher power consumption—under load the AMD chip pulls almost twice as much power as Intel's Ivy Bridge-based juice sipper (though in terms of absolute power, we're talking about less than 100W more). That said, Depending on what you're doing with your work computer, the FX-6300 is a relatively inexpensive option worthy of your consideration. You can see a detailed comparison of the FX-6300 to the i3-3220 in CPU Bench.

ASRock's 970 Extreme3 AM3+ ATX motherboard is a straightforward, fully-featured product that, in my experience, is quite reliable. It offers plenty of expandability for peripherals with its two PCIe x1 and two PCI lanes, and users interested in GPGPU computing will find two PCIe X16 lanes (though when both are populated, one runs at x16 and the other at x4). We're pairing this board with a 16GB kit of basic DDR3-1600 from Corsair, consisting of two 8GB sticks. This leaves two slots open for an easy, drop-in upgrade to 32GB if you deem that a wise use of your money.

Regarding storage, two of the most reliable products on the market get the nod—Intel's 520 Series 120GB SSD and Western Digital's 1TB Black HDD. Both carry five year warranties from their manufacturers, whereas most SSDs and HDDs carry two- or three-year warranties. The combination of a fast OS and application SSD with a fast, high capacity HDD is a good general solution for most workflows; you might be better off with a single large SSD, or your work might be more cost effectively completed with a tiny SSD (like Intel's 520 Series 60GB) and multiple larger, slower hard drives (like Western Digital's Green 2TB). And of course, don't forget external backup storage!

BitFenix's Ghost gets our nomination to house everything. Dustin reviewed this sleek-looking case recently, and like him, I've enjoyed building systems in this case. Its thermals are more than up to the task of cooling a higher TDP CPU like the FX-6300. Keep in mind that all of our case suggestions in this buyer's guide are interchangeable, so if you happen to like a case detailed in another build, you can certainly put these parts in that case. Powering everything, we have Antec's Earthwatts 380W. Though Antec has switched OEMs over the course of this product's history, I have now installed this model into over 100 systems in the last few years, and one has failed. In other words, it's about as reliable as a low-cost, mainstream PSU comes.

Finally, this build includes a copy of Windows 7 Professional 64-bit. You can get an overview of the differences between Windows versions at Microsoft and Wikipedia. Some of the more relevant and important differences between Professional and Home Premium are the former's support for more than 16GB of RAM, Windows XP mode, domain join, and integrated backup and restore features.

Component Product Price Rebate
Case BitFenix Ghost $100  
Power supply Antec Earthwatts 380W $45  
CPU AMD FX-6300 $140  
Motherboard ASRock 970 Extreme3 AM3+ ATX $85  
RAM 16GB Corsair Value Select DDR3-1600 $60  
SSD Intel 520 Series 120GB $130  
Hard drive Western Digital Black 1TB $110  
Graphics card Sapphire Radeon HD 5450 1GB $35 -$15
Optical drive Lite-On iHAS124-04 $18  
Operating system Windows 7 Professional 64-bit $137  
  Total: $860 $845

Intel workstation

I consider the next tier up from the AMD FX-6300/Intel Core i3-3220, in terms of workstation productivity, to be the AMD FX-8350/Intel Core i5-3570 tranche. At this price, however, the pendulum swings closer to Intel's CPU—largely because the AMD FX-8350 uses about 100W more under load to sometimes accomplish less actual computational work. That said, be sure to read how the FX-8350 compares to the Core i5-3570; if the AMD chip will be better for your workloads (despite its electrical gluttony), you can use it instead of the FX-6300 in the build above. If your workloads benefit from Hyper-Threading, you should consider stepping up from the Core i5-3570 to the Core i7-3770. You can see how the two Intel CPUs compare once again in CPU Bench.

Like the AMD FX-6300 workstation detailed above, we're including 16GB for this workstation. The ASUS P8B75-V is a reliable B75 chipset-based board with plenty of room for expansion (such as drop-in expansion to 32GB of RAM). Both PCIe lanes are able to function at x16, though one is a PCIe 2.0 slot and the other is a PCIe 3.0 slot (not that this distinction is particularly important at this point in time). Perhaps the only drawback to the B75 chipset is that it has only one SATA III port, though if you have only one SATA III SSD, this is not an issue.

For storage, we're recommending the Samsung 840 Pro. If you follow Anand's SSD reviews, we noted the pre-production firmware resulted in dead drives, but that the production firmware appears to have corrected this issue. Given the track record of the Samsung 830, I have no reservations recommending the 840 Pro for production systems. We're also stepping up the storage capacity with a 2TB rather than 1TB Western Digital Black platter-based drive for this system; though again, only you know how much storage you'll need for your workloads.

I've recommended the Fractal Design Define R4 before, and continue to use it extensively for custom builds. Its combination of good thermals, excellent acoustics, and slick looks make for a very compelling $100 case. Finally, the Seasonic S12II series has an outstanding reputation for supplying clean, reliable power, and the 430W version provides enough juice for the build detailed below as well as any single GPU graphics card on the market, if you're interested in GPGPU computing.

Component Product Price
Case Fractal Design Define R4 $110
Power supply Seasonic S12II 430B $60
CPU Intel Core i5-3570 $215
CPU alternate Intel Core i7-3770 $300
Motherboard ASUS P8B75-V B75 ATX $90
RAM 16GB Corsair Value Select DDR3-1600 $60
SSD Samsung 840 Pro 128GB $150
Hard drive Western Digital Black 2TB $180
Optical drive Lite-On iHAS124-04 $18
Operating system Windows 7 Professional 64-bit $137
  Total (with i5-3570): $1,020
  Total (with i7-3770): $1,105

On the next page, we step up to a Sandy Bridge E-based workstation.

Overview Intel High-End Workstation
POST A COMMENT

49 Comments

View All Comments

  • meyerkev248 - Monday, December 10, 2012 - link

    If you're going to stick anything bigger than that GeForce 210 into the 650D, I'd strongly recommend getting the mesh side panel for it. and mounting some extra fans. The default fan setup is fairly terrible, and I was basically losing a part every month before I got the mesh panel. Great case otherwise though.

    /I also was stupid enough to stick 2 6970's into a case with a bad fan setup, and then wonder why every single card I stuck between the graphics cards was dying in a week. I lost a sound card, a tv tuner, a wireless card, my motherboard, and one of the graphics cards inside 3 months. 4 120mm fans later, I' haven't lost a thing since last Christmas.
    Reply
  • UnderscoreHero - Friday, September 20, 2013 - link

    I've got 2 windforce 670's in SLI, I have had no cooling issues at all. What is your fan configuration like? I have the stock 200mm fan in the front for intake, and the other on top for exhaust. Rear 120mm, and a push/pull Hyper 121 Evo with Corsair SP120's. Those SP's push the air out the back pretty quickly. I also don't have drives in the bottom cage, only the top. Is your fan filter all dusty? Room temp too hot? Reply
  • UnderscoreHero - Friday, September 20, 2013 - link

    * Hyper 212 Evo Reply
  • Dustin Sklavos - Monday, December 10, 2012 - link

    AMD's workstation cards can be a little hinky on the driver side, but if you're just working with Maya they can be a killer bargain.

    If you're editing video masters, the i7-3930K is going to be a good choice, HOWEVER...if you're editing video that's going to go up on YouTube, you may actually be better served by an i7-3770K and QuickSync. There's a clear performance hit in initial render time when you do the master, but I know that for my burlesque performance videography, QuickSync has been absolutely invaluable.

    Finally, either way, video editors are going to want at least a pair of mechanical drives (or a very large SSD) in some form of striped RAID to use as a scratch drive.
    Reply
  • Next9 - Monday, December 10, 2012 - link

    i7-3770K is absolutely inappropriate for Workstation, since it lack Vt-d support. In addition what is the point of buying i7, if the real Xeon E3 v2 costs the same? Reply
  • Dustin Sklavos - Monday, December 10, 2012 - link

    If you're editing video. A lot of the prosumers overclock their workstations because video editing is so CPU intensive (check the Adobe Premiere Pro forums). Vt-d isn't a major loss for these users. Reply
  • Next9 - Monday, December 10, 2012 - link

    only kids "overclock"....

    Workstation means rockstable, 24/365 reliable machine. Where is ECC RAM with i7-3770K? Proffesionals edit video on XEON workstations running RedHat using Autodesk Smoke.

    overclocked i7-K with Adobe is hobbyist market :-)
    Reply
  • GrizzledYoungMan - Monday, December 10, 2012 - link

    Wrong. Premiere Pro and FCP (less so, since the FCP X debacle) make up the majority of the professional video editing market. Autodesk software is only used in very high end applications.

    I do technology consulting for lots of low and middle tier video editing houses in NYC, the sorts of guys who pump out the content that fills up cable and broadcast TV and professionally produced internet video. They all use Premiere Pro and FCP.

    Even advertising is quickly adopting lower cost commodity editing systems like the one described here. Which leaves only high end cinema and very high end television for Autodesk - a small fraction of the market.

    As far as "only kids overclock," that's also wrong. Yes, professionals place a much higher emphasis on stability, especially in large corporate environments where procurement procedures take forever and gear has to last just as long.

    But for a lot of high performance SMB applications, I see overclocking being done all the time. Lots of independent and smaller media/design operations overclock to gain a performance advantage or save costs, and I've even seen a few software vendors buy overclocked servers (which are pretty easy to find from grey box resellers) for applications that are very sensitive to single threaded performance.
    Reply
  • AstroGuardian - Monday, December 10, 2012 - link

    Totally agreed. Reply
  • twtech - Monday, December 10, 2012 - link

    My official work machine is a dual processor Xeon workstation. It's very stable. I think I've only gotten a BSOD once in 3.5 years, and that's was the driver for a failing consumer-class GPU.

    However, I also do some work from home, and in that case I'll do work on my 3930K to which I applied a 800MHz OC to 4GHz. It's also very stable with a closed-loop watercooler, having gone a year so far running 24x7.

    Is the Xeon workstation more stable than my home machine? Objectively, probably yes. On the other hand, is my hand-built home workstation stable enough to depend on? I'd say also yes.

    Of bigger concern really is that I should get a beefy UPS. While my overclocked processor has never failed me, the power has gone out a couple times while I was using the machine.
    Reply

Log in

Don't have an account? Sign up now