Gaming Performance



Content Creation and General Usage Performance Workstation Performance
Comments Locked

22 Comments

View All Comments

  • Pumpkinierre - Monday, February 16, 2004 - link

    In your update you say the new BIOS 1.06q includes cpu multipliers. But the old BIOS had that. So does this mean a larger range ie 0.5x divisions? Also now that you've got the Geiger, could you check the PCI lock at several clockspeeds?

    This is important to me as my interest in purchasing an a64 is to run it at high clockspeed (with only a mild o'clock) as I believe this would substanstially improve gaming performance. Of course this is also dependent on fast low latency DDR 466-500 being available- still yet to occur!.
  • Boonesmi - Thursday, February 12, 2004 - link

    what about agp/pci lock? have you been able to test it yet??
  • Wesley Fink - Thursday, February 12, 2004 - link

    AOpen has just sent a revised BIOS 1.06Q, which adds vDimm adjustments from 2.5 to 3.0V in .05V increments. This is an outstanding upgrade from the 2.7v max vDimm in the BIOS we tested and makes the AK86-L one of the best 754 boards available for memory overclocking.

    A kind soul is hosting the 1.06q BIOS and a link has been added to the review.
  • JTDC - Tuesday, February 10, 2004 - link

    Does anyone know where the 1.06 BIOS revision can be found? I cannot see it on the AOPEN site. Any suggestions as to where I can look?
  • peonyu - Friday, February 6, 2004 - link

    I have a Aopen board [not this one though,damn] and the options on it are awesome, same with its stability and performance. The only prob though is the same that this board has - VERY low voltage settings. For reasons i dont understand Aopen is very stubbern with allowing higher voltages, it happens with every board they release. So until they get past that and release a update which increases voltage I dont think it would be worth picking one of these up if your into overclocking.
  • Shinei - Thursday, February 5, 2004 - link

    Does Athlon 64 rely on timings as much as the Athlon XP did? I didn't think it did, considering the bandwidth it can use eclipses even the Pentium 4's...
    As for the article, now I really wish I'd waited a few months to upgrade, instead of going straight for the GA-7N400P2/2800+ in December...
  • Pumpkinierre - Thursday, February 5, 2004 - link

    It would have been nice if you had included some benchmark results at the different multiplier o'clocks or even standardised to 2gig (ie 9x222,8x250) now that you have an A64 board that doesnt have memory, multiplier, HT or (from initial observations) AGP/PCI lock issues. Naturally memory latency settings would have to be kept the same. My pet theory with the A64 is that increasing the RAM speed and lowering memory latency (which appears difficult on many a64 mobo/memory combinations) would be as good as a standard o'clock which to date has'nt been the a64's strong point. This seems like the right board but we're still waiting for CAS2 DDR500.
  • Boonesmi - Thursday, February 5, 2004 - link

    dang i really like that board.

    when are you expecting the "PCI Geiger"??
    hehe i want an update :)
  • Wesley Fink - Thursday, February 5, 2004 - link

    #1 - Four "3-pin" fan headers is correct, and the typo is fixed.

    #2 - We will be reviewing a few of the memory brands you mention in a few weeks. A socket 754 board will be included in the tests.
  • bhtooefr - Thursday, February 5, 2004 - link

    Damn, I want one! Of course, it would be even better if it were Micro ATX... (I've already got a mATX case, and it's very small)

Log in

Don't have an account? Sign up now