Thank you for your excellent review. To have the P4C800-E support both RAID 0 and RAID 1, would two disks in RAID 0 configuration be connected to the two ICH5R SATA ports and another two disks in RAID 0 configuration be connected to the two Promise PDC20378 SATA ports and then these two 2 disk RAID 0 arrays be configured to RAID 1 (mirroring)?
Using two WD raptors with the Asus P4c800-E want to run in Raid 0. I get in the raid set up but when I try to install windows [XP pro] I load the raid drivers {F6] window loads drivers.When it says loading windows for about two mins I get blue screen error something about drives or controllers not con figured. Could you shed some light on this problem. Works fine when using sata [non raid] Thanks NW
OK, I vaguely remember the 1.5 vs 2.0 issue for Prescott. However, what about the 100+ watts that made a problem with motherboard power supplies? Has this issue been resolved? The Asus web site and the manual state, "New power design supports next generation Intel PrescottCPU. Does this mean this motherboard has fixed the power issue. Also, what CPU heat sink/fan combination was used for the testing with 250+MHz FSB?
I believe the manual's reference to the ATI card versions is concerning the old problems with stability and enabling AGP 8x on early versions of these video cards on AGP 8x motherboards. I have a 1 year old 9700 Pro running perfectly on this motherboard at 8x with fast writes enabled, but I am not overclocking.
We’ve updated our terms. By continuing to use the site and/or by logging into your account, you agree to the Site’s updated Terms of Use and Privacy Policy.
Facebook
Twitter
RSS
30 Comments
View All Comments
jsapyta - Sunday, October 17, 2004 - link
Is this board good for gaming or should I switch to a AMD board?aditm - Thursday, December 18, 2003 - link
Can I have this Board please? Can I, Can I ?If so ... what am I sopose to do with it?
:(
Aniway Thanks !
:)
Anonymous User - Thursday, October 23, 2003 - link
Thank you for your excellent review. To have theP4C800-E support both RAID 0 and RAID 1, would two
disks in RAID 0 configuration be connected to the two ICH5R SATA ports and another two disks in RAID
0 configuration be connected to the two Promise
PDC20378 SATA ports and then these two 2 disk RAID 0 arrays be configured to RAID 1 (mirroring)?
Anonymous User - Friday, October 10, 2003 - link
I too am having trouble loading a clean install onto a Raid Array, any insight would be appreciatedAnonymous User - Friday, September 12, 2003 - link
Using two WD raptors with the Asus P4c800-E want to run in Raid 0. I get in the raid set up but when I try to install windows [XP pro] I load the raid drivers {F6] window loads drivers.When it says loading windows for about two mins I get blue screen error something about drives or controllers not con figured. Could you shed some light on this problem. Works fine when using sata [non raid] Thanks NWAnonymous User - Wednesday, September 10, 2003 - link
OK, I vaguely remember the 1.5 vs 2.0 issue for Prescott. However, what about the 100+ watts that made a problem with motherboard power supplies? Has this issue been resolved? The Asus web site and the manual state, "New power design supports next generation Intel PrescottCPU. Does this mean this motherboard has fixed the power issue. Also, what CPU heat sink/fan combination was used for the testing with 250+MHz FSB?Anonymous User - Wednesday, September 3, 2003 - link
0sparkie - Wednesday, September 3, 2003 - link
Thanks,If I have any stability problems I ' ll inform U.
Icewind - Wednesday, September 3, 2003 - link
Its a 9800 which conforms to all the standards on mobos, so your fine.Anonymous User - Wednesday, September 3, 2003 - link
I believe the manual's reference to the ATI card versions is concerning the old problems with stability and enabling AGP 8x on early versions of these video cards on AGP 8x motherboards. I have a 1 year old 9700 Pro running perfectly on this motherboard at 8x with fast writes enabled, but I am not overclocking.