Final Words

Anyone who is an overclocker (or wants to be) should be able to find something that grabs their interest in this Overclocking Guide. With a range of prices from about $900 to just over $2300 for core overclocking components, you should find an overclocking system that can meet your interests or your budget. It was not really our intention to do four Buyer's Guides while looking at overclocking, but it was hard to address what we believe Overclockers are looking for without addressing both the Performance and Value segments of overclocking.

This led to recommendations for an Athlon 64 Socket 939 system, a Prescott Socket 775 system, a "first-time" hot Athlon 64 Socket 754 system, and our first recommendation of a value Athlon 64 Overclocking alternative based on the Sempron 3100+. If our choices seem heavily weighted toward AMD, it is only because AMD systems are the ones topping most of the overclocking charts at the moment. If you need convincing, go to www.futuremark.com and look at any top ten list for 3DMark2001SE. 3DMark2001SE is heavily influenced by CPU speed, which makes it very useful for comparing overclocked processor performance. The later 3DMark2003 is more useful for comparing pure video performance since it is much more video centric. You may be surprised to find the 3DMark2001SE ORB shows AMD heavily at the top. If Intel was the current Overclocking darling, as they have been in the recent past, you would see more Intel systems in our recommendations.

We have barely touched on Heatsink/Fans in this Overclocking Buyer's Guide. In all cases, we assumed the retail HSF in our prices unless we stated an alternative as we did for the mobile 3200+ choice. You can always improve overclocking results even further with a better HSF, and we do intend to address HSF recommendations in a future update to the Overclocking Buyer's Guide.

Now, go build your dream overclocking system and let us know what you think in our front page comments section. Whether you agree or disagree with where the Overclocking Buyer's Guide is going, we would like to know what you think.

Overclocking System Summary
Comments Locked

31 Comments

View All Comments

  • jeeptrkr - Friday, December 10, 2004 - link

    Perfect timing and very infomative article. I'm looking to buy a MSI K8N Neo2 Platinum w/ an AMD 64 FX-55 cpu.
    How would Crucial Ballistix PC4000 2.5-4-4-8 compare to PC3200 2-2-2-5 on the MSI mb? Faster bandwidth ver tighter timings?
  • decptt - Thursday, September 30, 2004 - link

    Thank you, Fink.
    I ran Athlon64 Mobile 3200 2.0@2.55 Vcore 1.8

    I will drop to 10x250 vcore1.7 for safer :>

    Ballistix run@ 1:1 2.5-4-4-8 (I don't want to set 2.5-3-3-5 like the review for make sure that it works fine)

    I'll tell the testing result again.

    P.S. I had reached to 10x260 V1.8, windows works but Prime95 doens't work stable.
  • southernpac - Sunday, September 19, 2004 - link

    Wesley,
    If Raid 1 is used (mirrowing), is the slow down negligble for a simulations gamer - or would it be noticable? Would the same be the case with 7,200 rpm SATA's?

    I also notice that you listed the eVGA 6800, but the July High-End Guide listed the Gigabyte 6800 (Ultra). Have you noticed performance or manufacturing differences between the 6800 vendors?

    The photo of the Crucial Ballistik PC3200 512 memory has a CL113V.X1 part number on it. I can't find that part number listed on the Crucial web site. ? Bill Mackay
  • thebluesgnr - Saturday, September 18, 2004 - link

    This is one interesting article, but I wish it had the same idea of a "Value" system as other AT articles. The Value system of this guide is too much for me, here's what I came up with:

    AMD Athlon XP Mobile 2400+ 45W $77
    ASRock K7V88 Raid $44
    512MB (1 X 512MB) Corsair Value Select DDR400 CAS2.5 $79
    128MB GeCube Radeon 9550XT $99
    Antec SLK3700-BQE Black ATX Midtower w/ 350W PSU $90
    Seagate 80GB 7200RPM SATA (8Mb Cache) – ST380013AS $71

    HSF not included, total of $460.

    One could change that system to a Chaintech VNF3-250 + Sempron 3100+, but I would rather upgrade the video card first.
  • PrinceGaz - Saturday, September 18, 2004 - link

    #25 Wesley Fink- its great to hear a Value RAM roundup is being planned, listening to and where necessary addressing your readers comments is one of the main reasons AT is such a valuable website.
  • Gholam - Saturday, September 18, 2004 - link

    You have a mistake on page 13 - you list CM Stacker as an all-aluminium case, while it definitely isn't. It has aluminium panels, but the chassis frame is made of steel. It also weighs 14.9kg... ouch. On the other hand, there is no other case where ducting the PSU is as easy...
  • Wesley Fink - Saturday, September 18, 2004 - link

    #24 - I mentioned in the Value conclusion that you can cut $300 by choosing a cheaper case and an ATI 9800 PRO instead. Perhaps I should make those recommendations part of the Value OC chart in the future.

    #22 - I recommended one 512MB stick of Crucial Ballistix to get the cost down on the lowest priced system and still have great overclocking. We do plan a Value RAM roundup in the future.
  • cnq - Saturday, September 18, 2004 - link

    Wesley,

    Keep up the good work!
    Only nit is that like last time, you "forgot" (maybe it was intentional) to present a value video card. The price of the video card stuck out like a sore thumb in the summary pricing table for the value system!

    The power requirements are ugly, but consider putting the 9800pro in the summary table for the value system next time. Until the X700XT and 6600GT's come out (and in AGP), you can't do better for $190. [Or at least you could have downshifted from a 6800GT to a 6800 to save a hundred bucks on the value system.]
  • ksherman - Friday, September 17, 2004 - link

    you know what would kick arse? doing comparison tests! Compare all the different rigs you guys reccomend and see who the winners are. i.e. Performance OC vs your high end setup etc.
  • PrinceGaz - Friday, September 17, 2004 - link

    I really don't know why anyone here is so keen on the Sempron 3100+. You'd be a fool to buy one when the A64 2800+ is available at only a slightly higher cost, has twice the L2 cache, and most importantly 64-bit support. Anyone who buys a Sempron 3100+ today will regret it in a year or two when x86-64 Windows is supported.

    If you only keep a CPU for a year or so though, it makes even less sense getting something like the Sempron 3100+ with hopes of high overclocks unless you like always having an overclocked substandard processor.

    The non-high end memory issue is important and really needs to be covered, CAS 2.5 modules form the likes of Corsair are available at very competitive prices compared to CAS 2 modules. We need an article that looks at CAS 2.5 and also CAS 3 PC3200 modules from the major manufacturers so we can see how far they overclock, and at what voltages and timings. Most people don't buy CAS2 modules unless they're getting a top of the range CPU (2.4 GHz A64 or 3.2+ GHz Prescott), so if you look at an A64 3200+, you need to look at the memory most people will use with it.

Log in

Don't have an account? Sign up now