Soltek K8TPro-939: Moving A64 to 939
by Wesley Fink on October 28, 2004 12:05 AM EST- Posted in
- Motherboards
Performance Test Configuration: Soltek K8TPro-939
If you are interested in more information comparing the Athlon 64, Athlon 64 FX, LGA 775 Prescott, P4, and P4EE, please see our in-depth comparisons in the following reviews:AMD Athlon 64 4000+ & FX-55: A Thorough Investigation
nForce4: PCI Express and SLI for Athlon 64
.09 Athlon 64: Value, Speed and Overclocking
AMD Sempron: A Fresh Take on Budget Computing
Intel's 925X & LGA-775: Are Prescott 3.6 and PCI Express Graphics any Faster?
Intel 925X/915: Chipset Performance & DDR2
Intel Celeron D: New, Improved & Exceeds Expectations
Socket 939 Chipsets: Motherboard Performance & PCI/AGP Locks
AMD Athlon 64 3800+ and FX-53: The First 939 CPUs
The Athlon 64 FX-53: AMD's Next Enthusiast Part
Intel's Pentium 4 E: Prescott Arrives with Luggage
Athlon64 3400+: Part 2
AMD's Athlon 64 3400+: Death of the FX-51
Athlon64 3000+: 64-bit at Half the Price
| Performance Test Configuration | |
| Processor(s): | AMD Athlon 64 FX53 (2.4GHz) Socket 939 |
| RAM: | 2 x 512MB OCZ PC3200 Platinum Rev. 2 2 x 512MB Mushkin PC3500 Level II 2 x 512MB OCZ PC3500 Platinum Ltd |
| Hard Drive(s): | Seagate 120GB 7200RPM IDE (8MB Buffer) |
| Video AGP & IDE Bus Master Drivers: | VIA 4in1 Hyperion 4.51 (12-02-2003) nVidia nForce 6.11 Beta (nForce4) nVidia nForce Platform Driver 4.24 (nForce3 Ultra) |
| Video Card(s): | nVidia 6800 Ultra (AGP 8X) nVidia 6800 Ultra (PCI Express) |
| Video Drivers: | nVidia nForce 61.77 (VIA K8T-P, nF3 Ultra, Intel 925X) nVidia nForce 61.81 Beta (nForce4) |
| Operation System(s): | Windows XP Professional SP1 |
| Motherboards: | Soltek K8TPro-939 (VIA K8T800 PRO) Epox 9NDA3+ (nForce3 Ultra) nVidia nForce4 Ultra Reference Board Abit AV8 PRO (VIA K8T800 PRO) ECS KV2 Extreme (VIA K8T800 PRO) Gigabyte K8NSNXP-939 (nVidia nForce3 Ultra) MSI K8N Neo2 (nVidia nForce3 Ultra) MSI K8T Neo2 (VIA K8T800 PRO) |
Tests used OCZ PC3200 Platinum Rev. 2, which uses Samsung TCCD chips. Earlier 939 benchmarks used Mushkin PC3500 Level II or OCZ PC3500 Platinum Ltd, which were both based on Winbond BH5 memory chips. BH5 memory has been discontinued and is no longer available. All memory ran at 2-2-2-10 timings in all benchmarks.
Since the nVidia 6800 Ultra AGP was used for testing in the 939 chipset launch, we used the 6800 Ultra AGP for benchmarking the Soltek K8TPro-939. The PCI Express 6800 Ultra was used for all testing with the nForce4 and the Reference Intel 925X. Resolution in all benchmarks is 1024x768x32 unless otherwise noted.
Results for VIA K8T800 Pro based motherboards are in green in our results. The Soltek K8TPro-939 we are testing is color-coded in dark green. nVidia nForce3 Ultra based boards results are orange, with the nF4 Ultra results in red. Intel 925X results are in blue. Intel results are included for Reference only. The color coding should allow easy comparison of the tested Soltek to other VIA chipset results and to other chipsets and processors.
Facebook
Twitter
RSS
21 Comments
View All Comments
WT - Monday, April 11, 2005 - link
A Soltek response in the forums:http://forums.anandtech.com/messageview.aspx?catid...
horsefly24 - Tuesday, January 18, 2005 - link
Here is an update to the Soltek SL-KT8 Pro motherboard to the DDR400 bios problem http://www.soltek.de/soltek/download/download_all....bob661 - Tuesday, November 2, 2004 - link
#16I have one of those boards but haven't tried the hothardware.com suggestion. I don't feel comfortable with cranking my HT up to 230 just to see if the damn locks work. Also, I'm going to try lowering the HT multiplier to see if that might enable the lock. I just wish Anand was a bit more precise in explaining how he got his lock to work.
Schro - Sunday, October 31, 2004 - link
>We suspect that this generates enough US volume>that Soltek must wonder what the real value of
>a US distributor would be.
Soltek HAD an exclusive US distributor, a company doing business as "Soltek USA". They were one of the best distributors that I have ever dealt with (sent plenty of promo packs ;)... ). They called it quits because Soltek Taiwan sold direct to the Egg, who was supposed to be purchasing from the US distributor. This undercut Soltek USA's business, etc etc. Hence, they have been gone for over a year now.
Wesley Fink - Thursday, October 28, 2004 - link
#16 - We also tried 233 on the Soltek which also did not work.As for 939 reviews, the Gigabyte GA-K8NS Ultra-939 is a lower cost version of the GA-K8NSNXP-939, which we have already reviewed. Since we have already reviewed the flagship Gigabyte 939, we will not be reviewing the lower members of the same family. The same applies to the lower-featured versions of some MSI boards.
The Asrock is based on the Uli chipset, and it's a possible review for the future. However, with PCIe boards coming, an AGP/PCI board with both sockets 754 and 939 probably won't find a slot in our review calendar.
thebluesgnr - Thursday, October 28, 2004 - link
Another great review, thank you Wesley.About PCI/AGP lock:
"However, no matter what lower ratio we chose, the highest CPU clock setting that we could achieve with stability was 228"
Some VIA K8T800 Pro boards without working locks have PCI/AGP dividers for 233 and 266MHz "FSB". Have you tried going from 228 directly to 233 on this board?
About that, I remember the MSI K8T Neo2 review. You wrote:
"We have been assured that shipping K8T Neo2 boards will have working PCI/AGP locks and we are passing this information to you."
I've seen many people complain that their boards do not have working locks; I've read this in a review (HotHardware.com):
"From 200MHz to about 212MHz, the K8T seemed to function normally. But at speeds from 212MHz through 230MHz, the board occasionally wouldn't POST. Speeds above 230MHz consistently worked, but we weren't very confident in our particular board's overclocking ability."
It would be great if you guys could get one of these from retail channel (and not directly from MSI) to check this out and update that review.
Anyway, with this Soltek review there are only two socket 939 boards listed in newegg not reviewd by AnandTech: ASRock K8 Combo-Z (cheapest s939 mobo, by $31) and Gigabyte GA-K8NS Ultra-939. If you could let us know if you'll review them I'd appreciate it. ;)
Gnoad - Thursday, October 28, 2004 - link
If there eventually is a BIOS update to this board that fixes the AGP lock, anandtech really needs to do a second review, or at least an update. This board looks like my future purchase if there ever is a updated bios.KrazyDawg - Thursday, October 28, 2004 - link
With the newer Asus motherboards, you won't have a problem with resetting the CMOS. There's an option to load defaults in the BIOS and if you're overclocking with an Asus motherboard and it fails to POST, it will reset the values to the ones previously used before you made the adjustment.Aikouka - Thursday, October 28, 2004 - link
#3, that floppy location is a pain, because if you ever have to get to the BIOS reset jumper, it makes it a lot harder, especially if you have a large case. I have a Thermaltake Xaser III V2000A, and it's a fairly large case. So a lot of my cables are stretched as far as they can go (especially from the PCI IDE card) and the floppy cable is no exception. At one point, I wanted to reset the bios, because the board was acting funny, and this was made extremely difficult by the location of the floppy connector and the bios reset jumper's location. One of the two should be moved to allow easier access. Also, the front panel connectors (Power switch, etc.) are below that, putting even more tight cables in the way.Looking at the picture, the JBAT jumper is located right beside the floppy cable, making it a pain to work with anyway.
Just like on the SL-K8ANE2-GR the purple doesn't suit it very well.
Soltek is really good with customer support, though. I was having problems with my board and they even sent me a beta BIOS to try out. Responses came back within 3 hours (usually around 1 hour.)
Wesley, I don't know chip prices off-hand or anything, but I can't see how VIA's solution would add a great cost to the board when Chaintech sells a VIA ENVY pci sound card, which retails for $25 (retail) on newegg.
UnderScore - Thursday, October 28, 2004 - link
Wesley,I like that AT includes content creation & encoding tests and I realize that games are popular repeatable ways to stress test a system. Perhaps these MB reviews could be less focused on game performance and more on the MB's subsystems? Why not prove that the Gigabit LAN will be slower on the PCI bus rather than guessing that it will likely be slower. Am I to assume that USB, Firewire, Onboard digital I/O etc by default are all working perfectly if they are not mentioned? Testing & reporting of such items would make AT's testing methodolgy more balanced since just like #4 & #9 mentioned, not everyone is an overclocker & similarly not everyone plays games regularly (esp FPS).
In closing, I thank you for all the work that you do & I hope you take this constructively as I had not intended to slam you or AT.
Thanks,
James