Asus P5WDG2-WS: Intel 975X goes to Work
by Gary Key on December 6, 2005 12:05 AM EST- Posted in
- Motherboards
Asus P5WDG2-WS: Presler Overclocking
FSB Overclocking Results
The Asus board redeems itself at overclocking the Presler (Pentium D 950), considering its workstation based limitations at overclocking the 840EE. At these settings, the system was able to complete all of our benchmark test suites three consecutive times and also run Prime95 and SuperPI without issue. We were unable to overclock the FSB past 305 due to board limitations, but we were able to boot into WinXP at 4.80GHz on air cooling while reaching 5.00GHz at post. The performance of the Presler is exceptional for an Intel based system. The benchmark results shown were attained at the FSB settings that offered the highest scores. We will be exploring Presler's full capabilities in a future article.
FSB Overclocking Results
Front Side Bus Overclocking Testbed | |
Processor: | Pentium 4 Presler LGA 775 Dual Core 3.4GHz |
CPU Voltage: | 1.5125V (1.3000V default) |
Memory Voltage: | 2.2V |
NorthBridge Voltage: | 1.55V |
SouthBridge Voltage: | 1.05V |
Cooling: | Thermaltake Big Typhoon |
Power Supply: | OCZ Power Stream 520 |
Video Card: | 1 x EVGA 7800GTX 512 |
Maximum CPU OverClock: | 291fsb x 16 (4663MHz) +37% |
Maximum FSB OverClock: | 305fsb x 15 (4580MHz) +52% |
The Asus board redeems itself at overclocking the Presler (Pentium D 950), considering its workstation based limitations at overclocking the 840EE. At these settings, the system was able to complete all of our benchmark test suites three consecutive times and also run Prime95 and SuperPI without issue. We were unable to overclock the FSB past 305 due to board limitations, but we were able to boot into WinXP at 4.80GHz on air cooling while reaching 5.00GHz at post. The performance of the Presler is exceptional for an Intel based system. The benchmark results shown were attained at the FSB settings that offered the highest scores. We will be exploring Presler's full capabilities in a future article.
31 Comments
View All Comments
Tujan - Wednesday, December 7, 2005 - link
Can you tell us what power supply was used on this Asus multi-layered board ? What kind of power muscle did get used. ? [ ]Thanks.Didn't see it right off in table of 'Setup.
Gary Key - Wednesday, December 7, 2005 - link
We used the OCZ Power Stream 520. It is our standard power supply for testing. I have listed in the overclocking setup but not in the regular test setup. I will add that line in the next article.Thank you.
Kensei - Tuesday, December 6, 2005 - link
Cool quote from the man often referred to as the first US psychologist. The psychology building at Harvard, where he was a professor, is also named after him. And I'm pretty sure he got that honor without giving them a ton of money.Kensei
Saist - Tuesday, December 6, 2005 - link
just wondering how the board would compare using the Via Envy HT-S sound chip...Gary Key - Tuesday, December 6, 2005 - link
Would a Chaintech AV710 satisfy your question? ;->Hikari - Tuesday, December 6, 2005 - link
I have some horrible 945G board (don't ask, I use a 7800GT lol), and I can't even run PC2-6400 over 667, nor will the computer not crash if I put the bus over 205. :(So when are the 975x boards supposed to come out? I see some of the Intel boxes listed now in froogle (not usually in stock though), but not from Gigabyte, Asus, or anyone else yet. :) I'd be happy if it is before the 21st (my birthday). This Asus board looks like it'll be exceedingly expensive, though.
rrcn - Tuesday, December 6, 2005 - link
Boards featuring the 975X chipset should hit retail stores sometime this week. We'll see...Gary Key - Tuesday, December 6, 2005 - link
The 975x boards should be shipping in volume by the end of the year. We expect to see a small sampling of boards in the retail channel as early as next week but as always that could change.IntelUser2000 - Tuesday, December 6, 2005 - link
Right... I am gonna overclock my workstation system by 30%...."I'll overclock my server by 20% when 4 million people depend on it NOT TO CRASH!!"
Gary Key - Wednesday, December 7, 2005 - link
I know the overclock testing was a bit much for a "workstation" board but it does give an indication to the quality of the components used on the board. :->