The performance of the Pure3D II, as with all Voodoo2 cards out today, falls within a few percent of the competition, eliminating the need to re-run an entire suite of benchmarks spreading across multiple processor platforms.
How I Tested
Wait for VSYNC was disabled during the tests
Canopus' Supplied Pure3D II Drivers were used in conjunction with the Millennium II AGP Drivers
The Memory Clock was set at 100MHz
Quake 2 v3.14 was used; The full version of Turok was used, not the downloadable demo.
Test Configuration |
|
Processor(s): | AMD K6/300 AFR Intel Celeron - 266 Intel Pentium II - 266 |
Motherboard(s): | Socket-7: Epox MVP3C-M MTech R581-A Slot-1: ASUS P2B |
RAM: | 1 - 64MB Corsair PC100 SDRAM DIMM |
Hard Drive(s): | Western Digital Caviar AC21600H |
Video Card(s): | Canopus Pure3D II - Voodoo2 (12MB PCI) Matrox Millennium II (4MB WRAM - AGP) |
Bus Master Drivers: | Intel 3.01 VIA 2.14 |
Video Drivers: | MGA Millennium 4.03.00.3410 VIA Gart VxD |
Operation System(s): | Windows 95 Service Release 2.1 |
3D Gaming
Performance - Frame Rates |
||||
Quake 2 | Turok TMark | |||
Processor |
Demo 1 800 x 600 |
Demo 2 800 x 600 |
Glide 640 x 480 |
Direct3D 800 x 600 |
AMD K6 | --- | --- | --- | --- |
Intel Celeron | 54.5 | 49.3 | 103.3 | 67.3 |
Intel Pentium II | 59.8 | 57.4 | 125.2 | 87.4 |
3D Gaming
Performance - Frame Rates |
||||
Quake 2 | Turok TMark | |||
Processor |
Demo 1 800 x 600 |
Demo 2 800 x 600 |
Glide 640 x 480 |
Direct3D 800 x 600 |
AMD K6 | 35.1 | 34.4 | 86.4 | 60.8 |
Intel Celeron | 59.8 | 57.9 | 119.1 | 78.7 |
Intel Pentium II | 63.3 | 61.5 | 141.8 | 99.7 |
3D Gaming
Performance - Frame Rates |
||||
Quake 2 | Turok TMark | |||
Processor |
Demo 1 800 x 600 |
Demo 2 800 x 600 |
Glide 640 x 480 |
Direct3D 800 x 600 |
AMD K6 | 37.2 | 36.0 | 93.5 | 67.4 |
Intel Celeron | 63.1 | 61.1 | 123.4 | 88.9 |
Intel Pentium II | 65.0 | 63.2 | 160.8 | 110.6 |
0 Comments
View All Comments