ASUS M2N32-SLI & Epox MF570SLI: AM2 Wunderkinder
by Wesley Fink on June 28, 2006 5:10 AM EST- Posted in
- Motherboards
Test Setup
Test conditions were maintained the same, as much as possible, over the platforms tested. For better comparison standard test results (1280x1024) were run with a single NVIDIA 7900GTX on all platforms. A single ATI X1900XT was also tested at standard resolutions on the ATI Reference board. Consider this result a sanity check for single card performance and Crossfire. It should not be directly compared to other test results. Since SLI and Crossfire are not yet interchangeable, 1600x1200 4xAA/8xAF SLI was run on the NVIDIA-based boards with a pair of 7900GTX. 1600X1200 4xAA/8xAF Crossfire was run on the ATI using an X1900 XT Master + Single Crossfire. All results are reported in our charts and color-coded for easier identification of results.
AM2 benchmarking used Corsair PC-8500 (DDR2-1066) 2GB kit at 3-3-3 timings at around 2.2V. In recent months the memory market has moved from a 1GB kit to a 2BG kit being the common memory configuration. Our new DDR2 test standard will therefore be 2GB and we used the 2GB DDR memory for best comparison.
| Performance Test Configuration | |
| Processor: | AM2 4800+ (X2, 2.4GHz, 1MB Cache per core) |
| RAM: | 2 x 1GB Corsair Twin2x2048-8500C5 Tested at DDR2-800 3-3-3 2.2V to 2.3V |
| Hard Drive(s): | Maxtor MaXLine III 7L300S0 300GB SATA2 (16MB Buffer) Hitachi 250GB SATA2 enabled (16MB Buffer) |
| System Platform Drivers: | NVIDIA - 9.34 ATI - LAN, Audio, SMBus drivers as required |
| Video Cards: | 1 x EVGA 7900GTX - All Standard Tests 2 x EVGA 7900GTX - SLI 1 x ATI X1900XT - ATI Standard Tests (for Reference) 2 x ATI x1900XT (Master + Standard) - CrossFire |
| Video Drivers: | NVIDIA 91.31 ATI Catalyst 6.4 |
| CPU Cooling: | AMD FX62 Heatpipe AM2 Cooler Zalman CNPS9500 AM2 |
| Power Supply: | OCZ PowerStream 520W |
| Motherboards: | ASUS M2N32-SLI Deluxe Epox MF570SLI ATI Crossfire Express AM2 Reference Foxconn C51XEM2AA Gigabyte GA-M59SLI-S5 Biostar TForce 590-SLI MSI K9N SLI Platinum |
| Operating System: | Windows XP Professional SP2 |
Test conditions were maintained the same, as much as possible, over the platforms tested. For better comparison standard test results (1280x1024) were run with a single NVIDIA 7900GTX on all platforms. A single ATI X1900XT was also tested at standard resolutions on the ATI Reference board. Consider this result a sanity check for single card performance and Crossfire. It should not be directly compared to other test results. Since SLI and Crossfire are not yet interchangeable, 1600x1200 4xAA/8xAF SLI was run on the NVIDIA-based boards with a pair of 7900GTX. 1600X1200 4xAA/8xAF Crossfire was run on the ATI using an X1900 XT Master + Single Crossfire. All results are reported in our charts and color-coded for easier identification of results.
AM2 benchmarking used Corsair PC-8500 (DDR2-1066) 2GB kit at 3-3-3 timings at around 2.2V. In recent months the memory market has moved from a 1GB kit to a 2BG kit being the common memory configuration. Our new DDR2 test standard will therefore be 2GB and we used the 2GB DDR memory for best comparison.
Facebook
Twitter
RSS
23 Comments
View All Comments
leexgx - Sunday, April 15, 2007 - link
i am trying to get an stable overclock from this m2n32-sli deluxe got an 3800+ X2 at 2.65 (10x265) when i set it to 2.70 270 it just BSODdo i need to up MB and SB volts up ? as well or lower the NB to SB as well
if any one could point me to an web site that has overclocked one of these motherboards be usefull
mss242 - Tuesday, December 5, 2006 - link
doesn't the asus also offer raid 5? Page 2 lists raid options as 0,1,0+1,10, and JBOD.darkswordsman17 - Tuesday, July 18, 2006 - link
Something I've noticed is a lot of boards are starting to get DDL/Dolby Master Studio and DTS Connect capabilities, but Anandtech doesn't even mention it half the time, and doesn't even test it at all.I think it would be worth looking into, as its really starting to become a viable alternative to Creative's surround solutions (EAX support wouldn't even matter if its being encoded in DD/DTS would it), which more than a few people do not like (although myself am fairly neutral as I've liked the Creative cards I've owned). Also, there are plenty of people sore over losing DDL support when they moved to a newer platform than nForce2 with SoundStorm. I often see people saying how they still miss it, and yet, its been here for almost 6 months already (Intel Bad Axe, possibly others). I see a lot of new boards from ASUS, Gigabyte, and Abit featuring support for these.
Also a lot of these new boards are using different chips to handle processing, so maybe that makes a difference as far as quality or performance.
I just think it would be beneficial at the very least to make a note of it, as its not always easy to find out what boards actually do support them.
Just a thought.
classy - Wednesday, June 28, 2006 - link
Why not show the results of the scores gained from oc?DrMrLordX - Friday, June 30, 2006 - link
Probably because it's a review of the motherboard and not the CPU itself. All a motherboard review needs is information about the maximum HTT speeds achieveably on the board at stock.saratoga - Wednesday, June 28, 2006 - link
The CPU use numbers for the on board audio are great, but it'd also be nice to know just how good the actual quality is. If theres massive THD or a resampling problem, benchmarks will look great, but the part may still suck.Using RMAA would allow people to see immediately if there were any serious issues with the sound quality such as poor resampling or noise.
Seeing as other tech sites have started using it, it'd be nice if you guys could too. See this review:
http://techreport.com/reviews/2005q4/soundblaster-...">http://techreport.com/reviews/2005q4/soundblaster-...
Obvious so much info isn't needed for a motherboard review, but posting the summary chart that RMAA spits out with the crosstalk, SNR, IMD and THD numbers would be great.
Gary Key - Thursday, June 29, 2006 - link
We will post RMAA results when a new audio chip is introduced. I will run the results on this chipset and have it available in our next article. We actually used RMAA 5.5 in a previous article and had more comments wanting subjective analysis. However, we will do the short version of the test results. :)Sifl - Wednesday, June 28, 2006 - link
With a new and interesting built-in WiFi option (as far as ATX MOBO's go), why not show us the antenna and where it goes?
For the Asus board layout, I can see all the IO ports (letter designations on the image could help identify which connector is which) but I'm not sure where the WiFi antenna would go. Is it the little gold colored thing off to the right in the picture for rear IO? Because I don't see that same thing in the top views. Maybe another view is better like a perspective view of the ports, rather than the straigh-on view.
And why does the Epox lack Firewire -- But has 10 USB's ?! Who uses 10 USB ports? Firewire is just basic for any digital video equipment. I chose my current MOBO (Epox 9NPA+) because it HAS Firewire. Maybe they will have another model with it included.
Myrandex - Wednesday, June 28, 2006 - link
"Who uses 10 USB ports?" I do...But then again I also use firewire, bure still it would have been stupid for Epox to have included less USB ports (arrggg EVGA's microATX nForce4 SLI mobo of mine only supporting 8). Back 6 have printer, Windows Media Center Remote sensor, mouse, cell phone data/charger for MPX220 (mine), and cell phone data/charger for Motorola V3 Razr (g/f's), and webcam. Then only 2 of my front 4 USb ports can be connected, and that means I can only use 2 USB devices in the front (ranging from hard drive cages for testing, flash sticks, USB controllers for emulators, etc.) For a manufacturer to have a chipset with 10 USBs yet only implement 8 is just kind of backwards and extremely pointless :-/
On a side note I did have to laugh at PCI/AGP Fixed at 33/66 as there seem sot be no AGP on these boards for it to be locked at 66 :)
Jason
Wesley Fink - Wednesday, June 28, 2006 - link
Yes, the antenna screws to the gold connector on the right of the rear IO port on the Asus.As for no firewire on the Epox, it is likely a cost savings to meet a target price point. Most of the digital cameras we have seen recently have emphasized high-speed USB2 instead of Firewire, although we agree Firewire is still widely used in digital cameras and video. Add-on Firewire cards are very reasonable, but they would be an added expense if you required Firewire on the Epox.
The MSI 570 reviewed at http://www.anandtech.com/mb/showdoc.aspx?i=2773&am...">http://www.anandtech.com/mb/showdoc.aspx?i=2773&am... is also based on the nForce 570 chipset and does feature Firewire.