Final Words
Without DRC, the Doede USB to I2S converter gets my vote as a fantastic all in one solution. It's neutral, balanced and almost defies logic with its simplistic approach. The detraction against it is that using a single TDA1543 results in an output level that is simply too low when DRC is applied. Doede's solution to this is to stack up to eight TDA1543s in parallel to boost output current. I'm not sure if that approach appeals to me, but it may be worth a shot if you'd like to try this DAC out.
The Opus's strengths are in its spatial presentation and rendering of distance between instruments. The tubes do add a touch of warmth to the presentation, which is probably needed as this DAC pretty much strips everything from a recording and throws it into the soundscape. It's great if you've got a high quality recording, but on discs that have been butchered by recording engineers or those containing low quality digital samples the presentation is ruthless. Things may be different with the Ballsie output stage, though I'd expect the spatial element to remain prominent. I don't miss the modified Pioneer at all though, the Opus is far better when using the PC as a transport.
It is remarkable how little has changed in the audio world over the last 50 years or so. Some of us are still beguiled by vacuum tubes and open baffle speakers and trying to keep signal path complexity to a bare minimum (not mentioning any names). Others think that vinyl playback will never be surpassed by the ones and zeroes of digital. If ever there was a case against that argument, DRC has to be it. Yes, the PC is not only great for data storage and retrieval but also a device that can apply all manner of room adjustments while enhancing the listening experience rather than detracting from it.
Tie the USB DAC kits together with DRC and it all becomes the real deal. While PC based correction is not as easy to use as the offerings from Behringer and TacT, the PC software is scalable providing greater potential for expansion at a later date. Multi channel digital crossover integrated DRC is still out of reach for the masses though - especially if you want to apply correction to movie playback. You'll need all manner of plug-ins and the patience to set everything up properly as it's certainly not easy. Moreover, the cost of an entire system to cater to all this still falls in the "buy now, pay forever" territory for many.
For two-channel playback though, given the choice between purchasing a new audio component or the chance to buy something that can perform DRC, I'd pick DRC every single time. It's that darn good.
Facebook
Twitter
RSS
114 Comments
View All Comments
Olyros - Sunday, December 21, 2008 - link
What about Vista's digital room correction?I'd really like to see a comparison of the effectiveness of different DRC software on the pc, including Vista's own implementation.
Before reading this article DRC was off my radar, but now I'm really intrigued to try it out. However, reading this article one still doesn't know how he can use this specialized software with an application like Winamp or Vista Media Center. There's also no mention of all the impracticalities he might face like incompatible software, provisions for headphone use where DRC is not needed etc.
I think digital room correction on a computer could be a subject of an Anandtech article again.
Okos Bokos - Monday, December 15, 2008 - link
If you don't care about room, don't spend money on expensive equipment.Bass traps, diffusion panels (bookshelfs are perfect), position of speakers.
I used to play with all sort of best analyzers/equalizers, and it don't works.
In essence you can not treat time related problems (short reverbs that couses phase cancelations for eg.) with frequency related tools (equalizers).
My audio chain: CD – cables – amplifier – cables – speakers.
In 1998 I bought first pro audio soundcard, and changed CD with PC. I can not afford myself such good sounding CD player.
TV and home cinema is completily different issue.
Nice article... I had to make my first comment on AnandTech...
ccd - Thursday, December 11, 2008 - link
I'd love to hear from others on this issue, but my conclusions based on following thread on various forums is that the PC as a one box solution is far from perfect. The issues are as follows:
1) PC does not work as a source selector which means an external preamp if you want to use a source other than TV/cable and the CD/hard drive on the PC
2) Most solutions for volume control cumbersome at best, again requiring a preamp
3) Soundcards: the soundcards with the best DACs (ie Lynx) are not setup to act as just high fidelity soundcards. They are designed as studio mixers which makes them both expensive and hard to use for just good fidelity. Additionally, there are some formats that soundcards have not been able to decode. This is not because soundcards cannot decode, but that certain formats simply have not been available on soundcards.
4) DRC: I have not tried the software mentioned in this article, but I have tried other DRC software. My complaint is that the DRC software is not easily implemented for novices. You have to know more about using programs than I would like. Their effectiveness is a subjective evaluation, but stand alone processors are much easier to use, IMHO.
At this point in time, if I were to use a PC, I would use programs such as SoundEasy or the program available from ETFAcoustics to load a digital equalizer like the Behringer DCX 2496 for both digital crossovers and DRC. The PC is not a viable one box solution at this time as far as I'm concerned.
BTW: I should give the author the props he deserves. Most audiophiles who are into tubes and full range drivers would not touch DRC. This author not only touched it, but liked it. Hats off to you!
boredsysadmin - Wednesday, December 10, 2008 - link
I'm afraid this question will get lost in this rant war, but I'm still curios about this : How Does PC based DRC compares to ones built-in into new a/v receivers?P.S: CSMR is right on so many levels and IMHO combining ultra Hi-End speakers with DIY usb to analog kits seems a bit silly....
Rajinder Gill - Wednesday, December 10, 2008 - link
Depends if you're looking for a one box solution (which you obviously are). I have not seen much web based edict on the technical abilities of your standard budget-mid priced reciever based DRC. If it is scaled down somehow in functionality and attenuation, a double blind test against the software would prove if it's far behind.:) Judging by all the responses here, there should be some sites out there that have covered something around that idea.I only wanted something for my redbook playback and quick access to my tracks. Out on a limb yes, but that's just me.
egladil - Wednesday, December 10, 2008 - link
This article is just so typical for the pseudo-audiophile scene. There people do lots of very stupid things, including stupid subjective comparisons.For really good audiophile stuff, go to hydrogenaudio.org, there there is a rule: don't claim anything unless you have done double blind tests with significant positive results. Anything else is just too much influenced by placebo effects. Because of this reason this article is a case for a trash bin actually.
goshwan - Wednesday, December 10, 2008 - link
Yup,All musicians should not listen to their instruments at all, because it gives rise to subjective preferences. Subjective instrument choices by the individual should be outlawed. Every musician should by rights play the most scientifically perfect instrument. Subjective choices do not matter at all. We should all buy the same car based upon te pricinples of horsepower per dollar and most importantly 4 wheels touching the road. Don't you dare tell me that you have a favorite color!
We should all buy the same amps and speakers. Electronic engineers should be forced to adopt one single topology the world over. Further, no new product should enter the market place until the manufacturer can prove it's worth to the sinewave crew as offering something new and better than what's been released before. Product release shoul depend on approval by a team of government endorsed double blind testers.
Good luck in your quest!
phusg - Monday, December 15, 2008 - link
Hi there,I think you are confusing objective testing with equipment (over-rated) and subjective double-blind testing. Double-blind testing just takes out the placebo bias of knowing what hard/software set-up you are listening to. That doesn't make it objective, the assessor is still a human subject.
Regards,
Pete
ccd - Wednesday, December 10, 2008 - link
What is your issue with double blind testing??? If audiophiles are unable to tell the difference between $1000 speaker cable and $25 dollar speaker cable, isn't that worth knowing??? And what has double blind testing have to do with musicians not listening to their instruments or the rest of your rant???
Double blind testing can tell what people can differentiate (my speaker wire example) or what most people prefer. Personally, I think double blind testing is best for the former, not the later. Just because most people prefer something does not mean you would prefer it.
Rajinder Gill - Wednesday, December 10, 2008 - link
Wow, I never knew this stuff was going to continue on ad-infinitum when I wrote this piece. It'll please you all to know I have no plans to write another audio article. Anandtech will continue to concentrate on the computer stuff to the joy of many readers.I'm sure someone suitable will be found to take care of the soundcard stuff the way most of you would like to see it.
The gist of this article was basically to show that even someone as knotted up as me on certain gear could adopt DRC as something special and above lesser needs in the audio chain. Some people got that, others did not. I know I'm not the greatest conveyer of things in the written word, I did my best.
For the record, I also have solid state gear, so it's not all old-age beliefs. So let it go for the sake of your own sanity folks, there really is no winning these arguments.
Take care
Raja