MultiGPU Update: Two-GPU Options in Depth
by Derek Wilson on February 23, 2009 7:30 AM EST- Posted in
- GPUs
FarCry 2 Analysis
FarCry 2 is a good looking game with a well rounded graphics engine. We use the benchmark tool and a custom demo to test with ultra high graphics options while we try to minimize CPU impact.
1680x1050 1920x1200 2560x1600
Relative performance stays very consistent from 1680x1050 to 1920x1200 but looking at 2560x1600 tells a different story. Anything with 512MB of RAM just tanks in performance at the highest resolution. CrossFire and SLI can't help these lower memory parts keep up either. Even at lower resolutions it seems like the G9x based NVIDIA hardware just can't handle FarCry 2 very well at all. This make the 4850 a much better option than the 9800 GTX+.
1680x1050 1920x1200 2560x1600
As for scaling, SLI does really well with GT200 based cards and not so well with the 9800 GTX+. CrossFire scaling is very consistent between 1680x1050 and 1920x1200. Everything drops in scaling at 2560x1600 though. We expect that this is because of the increased memory and bandwidth requirements from the higher res.
1680x1050 1920x1200 2560x1600
Performance per dollar reveals the GTX 260 and GTX 260 SLI as the only NVIDIA options with value that competes with AMD solutions below 2560x1600. At the highest resolution, because of the memory limited performance issues, the value of our 512MB ATI cards drop to near the bottom of the heap. The Radeon HD 4850 X2 2GB is consistently high in value here and remains playable across all resolutions.
The settings we chose leave the G9x based parts (even in SLI) and the Radeon HD 4850 unplayable even at 1680x1050. Radeon HD 4870 level hardware and above can achieve the highest visual quality at the lowest res we tested. Pushing up, the 512MB 4870 drops a bit too much in performance to recommend at 1920x1200. The 1GB version of the 4870 holds on to playability and leads the GTX 260 core 216. At 2560x1600, the only single GPU option that barely gets by is the GTX 285. CrossFire and SLI (as long as the cards have more than 512MB of RAM) seem to have enough under the hood to run at the highest settings and resolution.
Facebook
Twitter
RSS
95 Comments
View All Comments
SiliconDoc - Wednesday, March 18, 2009 - link
1.Let me help you out. More people have 1280x1024 monitors, and any who do have flat panels, are most likely stuck at 1680x1050 because the 1920x monitors command a premium.So MOST GAMERS are far below 2650, and 1920, and even 1650, and some can't run 1280x1024.
A common game rez is 1024x768, 800x600 is also used currently on all the high end games - both especially with gamers with brand name store bought systems - we all know the big names ( not the multiple thousand dollar gaming brands - that's one of 50 gamers!). When you're stuck in a lab with $2,000 monitors and then travel to checking out the cebit babes, staying in touch with the average gamer is difficult, to say the least.
2. Even though the 260 passes 20 of 21 tests, and the 4850 passes LESS, Derek the red just HAS to state that the Sapphire passed every test they threw at it. Now the upper number doesn't jibe with that - the one showing the 4850 worked in LESS situations than the GTX260 -
BUT THE RED RAGE FUD NEVER ENDS.
( obviously more than one 4850 brand was in play - NEVER THE LESS - that is the type of CONSTANT red slant that is all over EVERY SINGLE PAGE.)
Hrel - Thursday, March 5, 2009 - link
I found an oddity. This articles posted power consumption doesn't correspond to other articles findings; yes I know I can't cross reference data across articles. In this article:http://www.anandtech.com/video/showdoc.aspx?i=3437...">http://www.anandtech.com/video/showdoc.aspx?i=3437...
The 9800GTX+ uses less energy than the HD4850 and in this multi-GPU article it's the other way around. I know I can't compare total system power findings but I'd think that the cards would at least be in the same order.
Can someone PLEASE clear this up for me? I'm very confused as to which card is more power efficient as the findings have varied so heavily across different articles.
It would probably be a good idea to list the power consumption of only the GPU, instead of the whole system. Doing that would remove variables, which is of course, a goal of any scientific experiment.
Hrel - Friday, February 27, 2009 - link
I just wanted to say, this is a great article. I'm glad you guys finally wrote an article comparing pretty much every card out there that people will consider buying, you could have included some lower end cards and resolutions. But hey, it takes a lot of time to do that many tests accurately; I appreciate all that you did do. It really was a well written and interesting article to read; good job anandtech.P.S. Any news on when new GPU's will be coming from Nvidia/AMD. I've noticed a LOT of price drops and mail in rebates on GPU's recently.
Zak - Wednesday, February 25, 2009 - link
"In general, more than one GPU isn't that necessary for 1920x1200"Depending on the definition of "that":) I disagree, gameplay is so much smoother with two cards on a 24" monitor. I tried playing with one 285 versus two, and while I don't have any real numbers, the differences is very noticeable. Crysis never dips below 40fps. This is my first real SLI since Voodoo II and I'm very glad I did it. You can always buy one card and decide if you want the second one later. I paid under $700 for two 285s and also got a copy of World at War and FarCry2 with two cards (a fluke maybe), that's almost $100 worth of games:)
Z.
magnusr - Wednesday, February 25, 2009 - link
Im currently using an ATI 4850 512MB at 1920x1080 on an x58 chipset system.I just ordered another 4850 for crossifre usage due to this article.
Thanks for the tip. Keep up the good work.
GoodRevrnd - Wednesday, February 25, 2009 - link
I know it's 2 years old, but it is still a relatively taxing game for it's age and is still relevant with the Tales of Valor expansion coming out... so could you PLEASE add Company of Heroes back into your reviews? I would just ask for Dawn of War 2 benchmarks, but it's the same engine and they didn't include a nice performance test. As it stands there are no RTS's in your hardware reviews. I'd just like to see a broader spectrum of games represented.Razorbladehaze - Wednesday, February 25, 2009 - link
I second the motion to include CoH.poohbear - Wednesday, February 25, 2009 - link
i gotta commend u on ur graphs, very clean and very easy to understand unlike some other sites that have confounding line graphs. i especially love how i can choose between different resolutions to see the diff instantly. Kudos to u guys.:)Nighttrojan - Wednesday, February 25, 2009 - link
I upgraded my gpu awhile back and got a MSI 4870 1 gig (ATI) card to replace my old MSI 7600gt 256 mb (Nvidia). However, although I can get better quality graphics with the ATI card, the Nvidia card is actually faster when playing Vanguard soh.... The game loads slower and takes more time shifting graphics (graphic lag), but the graphics look better and I can turn up settings a little higher. Any ideas on what's going on?Early Core2Duo 6600
Early ab9 pro abit motherboard
All drivers up to date
Razorbladehaze - Wednesday, February 25, 2009 - link
Any time you increase graphics settings on a game you increase the amount of information that needs to be off loaded to and from HDD, CPU, RAM, GPU so this is likely you reason for slower load times.But that card is in not actually "faster" than the 4870, in actuality that card is probably 2-3x better at rendering then the 7600 across all games.