SilverStone Fortress FT02: True Classics Never Go Out of Style
by Dustin Sklavos on August 15, 2011 12:00 AM EST- Posted in
- Cases/Cooling/PSUs
- SilverStone
- Full-Tower
Testing Methodology
For testing ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
| Full ATX Test Configuration | |
| CPU |
Intel Core i7-875K (95W TDP, tested at stock speed and overclocked to 3.8GHz @ 1.38V) |
| Motherboard | ASUS P7P55D-E Pro |
| Graphics Card | Zotac NVIDIA GeForce GTX 580 (244W TDP) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD Western Digital Caviar Black 1TB SATA 6Gbps Samsung 5.25" BD-ROM/DVDRW Drive |
| CPU Cooler | Zalman CNPS9900 MAX with Cooler Master ThermalFusion 400 |
| Power Supply | SilverStone Strider Gold 750W 80 Plus Gold |
A refresher on how we test:
Acoustic testing is standardized on a foot from the front of the case, using the Extech SL10 with an ambient noise floor of ~32dB. For reference, that's what my silent apartment measures with nothing running, testing acoustics in the dead of night (usually between 1am and 3am). A lot of us sit about a foot away from our computers, so this should be a fairly accurate representation of the kind of noise the case generates, and it's close enough to get noise levels that should register above ambient.
Thermal testing is run with the computer having idled at the desktop for fifteen minutes, and again with the computer running both Furmark (where applicable) and Prime95 (less one thread when a GPU is being used) for fifteen minutes. I've found that leaving one thread open in Prime95 allows the processor to heat up enough while making sure Furmark isn't CPU-limited. We're using the thermal diodes included with the hardware to keep everything standardized, and ambient testing temperature is always between 71F and 74F. Processor temperatures reported are the average of the CPU cores.
For more details on how we arrived at this testbed, you can check out our introductory passage in the review for the IN-WIN BUC.
Last but not least, we'd also like to thank the vendors who made our testbed possible:
Thank You!
We have some thanks in order before we press on:
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory we used to add memory thermals to our testing.
- Thank you to Zalman for providing us with the CNPS9900 MAX heatsink and fan unit we used.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Western Digital Caviar Black hard drive, Intel Core i7-875K processor, ASUS P7P55D-E Pro motherboard, and Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply.
Facebook
Twitter
RSS
59 Comments
View All Comments
brett.bdy - Monday, August 15, 2011 - link
Definitely has its issues, but still better than the FT03. Still unsure about which case I'm going with my next build. The Fractal Design ones are stellar for a company I only just learned about.PS
Fitting review for my birthday!
headbox - Tuesday, August 16, 2011 - link
$250 for a case that is still junk compared to a Mac Pro. Seriously JUNK! People wonder why Macs cost more? It's because they don't just round 2 edges of a cheap ATX case and have a jungle of cables inside. WHEN WILL WE SEE A PC CASE THAT ISN'T OVER PRICED CRAP???truthbeacon - Thursday, August 18, 2011 - link
" WHEN WILL WE SEE A PC CASE THAT ISN'T OVER PRICED CRAP??? "You see them all the time in (for instance) the Level 10 GT.
When will we see anything from Jobsland that isn't overpriced crap? Never.
When will we see anything that hints at creative diversity from Jobsland? Never.
When will we see anything terribly original from Jobsland? Those days ended a long, long time ago in a galaxy far, far away.
Damned crApple troll.
DallasWits - Monday, August 29, 2011 - link
Second this.I thought the apple trolls stayed over at Engadget and Arstechnica.....
Bobben49 - Monday, August 11, 2014 - link
Three years ago I built an air cooled 2700K sandy bridge system (I ordered MB and CPU on January 9th 2011 the day it was released) installed in this Silverstone Fortress 2 case. I had the system up and running stably at 4.4GHZ (I have all 4 cores locked at that speed none of that turbo stuff) on day after these two parts arrived. The longest downtime I've had since then was swapping out the MB with the B3 upgrade that I got free when the intel chipset problem was detected. I've had about 5 BSD's in 3 and a half years mostly from doing dumb things like rebooting the machine during the middle of a MS system upgrade. I've never had never had an overheating problem the cores are running at 38-44 degrees C right now and in the 70's C when I run Prime95 stress tests. Hey Mack trol. go look at the 1984 introducing the Mac ad. Your one of the zombies watching the movie not the one throwing the sledgehammer at the screenBTW! Until your new Mac Tube Steak came out, three years after I built my system, there was not a MacPro out there that could do an Adobe Photoshop HDR Merge faster than the system built by this schlup with no EE degree a couple grand and no multi million dollar budget. By the way what is your framerate on running Battlefield 4 on your Mac Pro. . . Oh! I forgot you can't run real games on a Mac . . My Mistake.
Bob Benson
My real Name "headbox" I don't have to hide my name like you Mac Zombie Trolls
IAMTHEPROCESSOR - Monday, August 15, 2011 - link
ANYMOO take off the steal grill at the top of the case improves airflow a lot i mean unless you know you have a wire that would fall in there if so do some cable tying on top of you case with your cables and just leave the top panel off for better temperatures you won't have to put fans on high! Put a noctua nhd14 then you never put those fans on high ANYMOO did you forget that not all the fans need to be put on high at the same time to get better temperatures! Now if you really want good temperatures change those fans on the bottom to 180mm fans without grill that are faster but make less noise then actually do some cable tying and don't complain like a noob about how lazy you are that you need to shovel your wires in the back of you case!!!! Also takoff psu fan grill!My PC specs
GTX 590 700MHZ!
2600K 5.0 GHZ!
COUGH CABLE TYING COUCH!!!! NEAT LIKE A PRO!
JarredWalton - Monday, August 15, 2011 - link
What the heck is with the CAPS and ANYMOO comments? It almost reads like a spam comment with the additions of random comments. "COUGH CABLE TYING COUCH!!!" Thanks for that -- very useful. I'm not even sure it's worth responding, but at the risk of stating the obvious:This is a review of a case, and as such it looks at how the case ships. Given this is a $250 case, it should include everything you need for optimal performance. Do the filters restrict airflow? Yes, a bit, but they also keep out dust. Does the top cable cover do the same? Sure, and it also makes the top of your PC not look like a mess of wires.
As the review points out, there's plenty that can be done to improve the case, but a lot of what can be done requires extra investments into an already expensive case. Different fans? $20 a pop for good quality options. USB 3.0 top ports? Probably another $20-$40. The FT02 is still a very good case, and the review is very positive overall, but that doesn't mean the case is perfect. Your suggestions amount to taking several of the key features of the FT02 and removing them, so why even bother in the first place?
mtoma - Monday, August 15, 2011 - link
You're right, the above comments are unusual, to say the least! It implies a lack of basic english. However, I have to pretty-please ask Dustin to put some extra photos in his future Silverstone cases reviews. Those extra-photos should present the case attached to a monitor, keyboard and mouse. I hope I don't ask for much, but I am concerned about the external cable routing (because of the I/O ports located on top of the case), and how neat it is.Maybe this would convince me about SIlverstone's original motherboard assembly, because, altough it's efficient, I want to see some esthetics to it.
To date, my reference case-design is Antec P183 and future Antec P280.
Thanks a bunch!
Dustin Sklavos - Monday, August 15, 2011 - link
That's a little more tricky to do, but for what it's worth the cable bundle spewing out of my tower through the routing hole in the back:3x DVI, one HDMI, 4x USB, Ethernet, FireWire, optical audio, eSATA, and a power cable.
It's not the most attractive thing in the world, but I leave the top cover on and my GTX 580 barely hits 70C under load. I'd say aesthetically it's probably fine. Actually more than fine, because having to route all the cables through the back winds up bundling them together quite nicely. :)
Samus - Monday, August 15, 2011 - link
FT01 owner here, and I'll say for sure it has its problems (low quality, odd sized 180mm stock fans, expensive additional SATA backplanes, top fan filter that is irremovable without partial case disassembly)...but it's still the best case I've ever owned.