Cooler Master Seidon 240M and 12 More Coolers: The Retest and Mega-Roundup
by Dustin Sklavos on April 26, 2013 6:01 AM ESTConclusions: It Always Depends on Your Needs
Before I get into specific recommendations, it's worth taking a few moments to talk about the three new coolers that were tested today: the Cooler Master Seidon 240M, the Noctua NH-U12S, and the Noctua NH-U14S.
First, while the Swiftech H220 may be the best 240mm closed loop cooler available, it also commands a healthy premium over the competition. This leaves Corsair's H100i and the Cooler Master Seidon 240M competing against each other, and this one's really a no brainer in favor of Cooler Master. The Seidon 240M sometimes lists for cheaper than the H100i, and while you don't get the software functionality or extra fan headers of the H100i, the 240M is slightly more efficient overall, and its mounting system is head and shoulders above the H100i. If you're in the market for a 240mm cooler and the Swiftech is too rich for your blood, then you're going to want the Seidon 240M.
What surprised me was just how well the two new Noctua coolers performed. The NH-U12S is basically at least as good as the stalwart NH-D14, but it's smaller and it's cheaper. Meanwhile, the big brother NH-U14S puts in a solid performance of its own, but losing that top PCI Express port for just a couple more degrees of performance is a major drag. These are both excellent air coolers in their own right, but if you're looking to spend premium cash on an air cooler, I'd go with the NH-U12S and then probably tack a second NF-F12 PWM fan on to the order.
I was happy to evaluate three new products and have all of them perform well. Asetek's probably none too happy that Cooler Master made a better 240mm cooler than they do (let alone CoolIT's mediocre entry), while Noctua's newer, simpler cooler designs seem to be more effective than the older, bulkier ones. Though it's not a head turner, as the least expensive cooler on the charts, the Cooler Master Hyper 212 Evo continues to perform admirably and justifies the Bronze Editors' Choice award it earned in the last roundup.
So what do you buy for what market? If you're on a budget, then your decision has been made for you: the Hyper 212 Evo is the best bargain out there. As for the rest of the coolers, you essentially need to consider your options. Outside of the NZXT Kraken X40 or Corsair H90 with a second fan, closed loop coolers under the 240mm mark just don't impress. The H80i was better than the H55 and H60, but that doesn't mean much when Noctua's solutions are competitive at around the same price. You have to run the H80i full bore for it to break away from the NH-U12S or NH-U14S, and that's a tough sell when either cooler can do the same job more quietly.
When you go north of $100, you're really looking at getting an H90 or Kraken X40 and buying a second fan, buying a Seidon 240M, or going for the Swiftech H220. The comparably priced 280mm Kraken X60 is able to break away from Swiftech's H220, but it has to run its fans a lot faster to get there, and you'll have a much harder time finding a case compatible with it than you will the H220. At ~$110, I'd probably opt for the Seidon 240M over having to beef up one of the 140mm solutions, but at ~$140, the Swiftech H220 is really where the buck stops.
It bears mentioning that in my last review, the H220 had issues with pump noise and harmonic resonance in the testbed. Using the retail kit, I experienced no such issues during testing. With my chief concerns largely taken care of in the retail model, I'm now totally comfortable giving the Swiftech H220 a Bronze Editor's Choice award. It's heavy, it's powerful, it's copper, and it's as good as you're going to get before you go full custom (which, hilariously, you can also do with it.) The same award also goes to Noctua's NH-U12S, which at $65 is as good a bargain as you're going to get from Noctua, and screams quality while offering solid performance.
62 Comments
View All Comments
Edkiefer - Friday, April 26, 2013 - link
really nice review with air cooler verse the water coolers . One comment though, looking at the air temps of PWM and 100% . They seem so close I would think you should get better results on 100% fan . Maybe the case still doesn't have good airflow for air coolers ?Just saying, I have the hyper evo and with stock MB fan profile verse modified (maxes to about 80% ) I say a least few c with app like prime95 .
biostud - Friday, April 26, 2013 - link
You could do a nice xy diagram with noise and delta temp on the axes.truprecht - Friday, April 26, 2013 - link
"You could do a nice xy diagram with noise and delta temp on the axes."Yes this 100x. It's so obvious - why is it not SOP for cooler comparisons?
DanNeely - Friday, April 26, 2013 - link
I put one together for a prior cooler review; it wasn't nearly as useful as a I hoped. With very few exceptions everything bunched up in a fairly narrow diagonal line.Noise is vertical; temp horizontal: http://orthogonaltonormal.com/midden/fans.png
JCheng - Friday, April 26, 2013 - link
DanNeely: On the contrary, I find that extremely helpful! Having to jump back and forth between the data points and the legend is kind of a drag, but to see the two dimensions really helps!DanNeely - Monday, April 29, 2013 - link
The reason I felt it was of limited value was that excepting some really bad performers on the quiet end of the range (designed for low power CPUs in SFF systems?) almost all the coolers fell along a relatively narrow horizontal line; meaning the best to worst ordering in the temp and noise tables was mostly equal with no major outliers.nail076 - Monday, April 29, 2013 - link
I agree, an X-Y chart of these values would better show the best performers in a sea of coolers.buhusky - Friday, April 26, 2013 - link
Why do fan & cooler reviews NEVER put the OEM fan/cooler numbers in there as a baseline? Never! It would be much better for me to compare to see how different of an upgrade the item(s) would be compared to what came with my stuff, not just as compared to each other....A5 - Friday, April 26, 2013 - link
The OEM coolers are terrible. They would make the graphs unreadable because all the aftermarket stuff would hardly look any different compared to the OEM cooler.matagyula - Friday, April 26, 2013 - link
In this case I don't think the OEM solution would keep the CPU cool enough -> i7 @4,4GHz, as written on the "Testing methodology" page.