Serious Sam Performance - Fill Rate

One of our favorite new tests, the Serious Sam benchmark, is able to demonstrate how much power the extra 25 MHz of speed is able to provide in a hypothetical situation. As you can see, the extra speed is able to increase the single texture fill rate of the GeForce2 MX 400 by 11.96 megapixels per second. As you can see, this falls way short of the theoretical 50 megapixels per second fill rate that the GeForce2 MX 400 should offer over the GeForce2 MX.

When multitexturing, the GeForce2 MX 400 gains 8.68 megapixels per second over the original GeForce2 MX. Once again, theoretically this number should be 25 megapixels per second, meaning that there is no question that the memory bus is holding the card back.

UnrealTournament Performance Serious Sam Performance - Game Play
Comments Locked

7 Comments

View All Comments

  • suze - Sunday, June 27, 2004 - link

    Nvidia 2GeForce400MX 64 does not say D or E or Turbo or anything. It is a pain & the AC'97 combo audio driver, conflicts with Nvidia2Geforce400MX
    Have any ideas?. Oh also the owner has knocked off (by accident two of the capacitors) I soldered them back on. any way...
    It will not boot up at all. it has MSI MoBo AMD Althon900Mhz 128MB Ram & I wonder if the MoBo was trashed from unknowing person pulling cards & cables? what do you think?
  • suze - Sunday, June 27, 2004 - link

    Greetings Hope you are ready for a quiz on old pc's Thank you.
  • melvingoddard - Tuesday, October 24, 2017 - link

    A misleading headline for a bogus report. I used to order graphics at http://domyessay.today/ for my reports.
  • randall938 - Thursday, April 26, 2018 - link

    Thanks to sharing the report you can also see here
  • coolkiu00 - Friday, August 30, 2019 - link

    owesome! I have not been through this issue yet! Thanks to your article, I have my own answer! thank you! https://coolmaps.io
  • FreeRobux007 - Wednesday, May 12, 2021 - link

    Valuable article to grab some knowledge regarding GeForce2 Mx. Thanks for the article. https://www.anandtech.com/
  • FreeRobux007 - Wednesday, May 12, 2021 - link

    Thanks again for providing such information free-robuxnoverification.com

Log in

Don't have an account? Sign up now