NVIDIA’s G70 at the Show

NVIDIA plans on sticking it to ATI with G70 and offering widespread availability of their new GPU very soon.  Manufacturers at the show have already indicated that the first shipments of G70 boards will be in their hands by the second week of June.

Boards are on display at the show, behind closed doors of course.  Of course, in Taiwan nothing is ever secret - and thus we’ve had the ability to play around with a number of G70 cards at the show.  We can’t say much about the G70 as we are bound by NDA, but all of the cards at the show are single-slot solutions which is refreshing.

Only a handful of NVIDIA’s closest partners have been given G70 designs to show off at Computex, the rest are told to wait until further notice. 

We also heard about a new ATI card, but not the R520 we’ve all been waiting for, rather a replacement for the X300 - the Radeon X550.  Like the X300, the X550 is a 4-pipe GPU but now running at 400MHz.  The GPU is also paired with a 128-bit 200MHz DDR memory bus, but little is known beyond those specs.

So far the R520 is no where to be found at the show; it’s looking like the rumors of a late release of R520 may be true.  ATI’s focus at Computex 2005 seems to be their multi-GPU chipset that is due to be launched at the official opening of the show.

Index Affordable SLI Motherboards?
Comments Locked

80 Comments

View All Comments

  • michaelpatrick33 - Monday, May 30, 2005 - link

    Or, you could put a whole Linux distribution on that and have some fun!

    Of course another drawback is that it is a 32bit PCI card, so you will only get a maximum of 133mBps sustained to the south/north bridge thus limiting it further. Still way faster than any hard-drive though.
  • AndreasM - Monday, May 30, 2005 - link

    Ah yes, use a ramdisk for the swap file so the computer doesn't slow down when swapping data to it from ram. Or not.

    #17 has a point though, this would be useful for Intelists that have moved to DDR2 and still have their old DDR-sticks around. Though it would probably be a better idea to just sell those sticks and buy more DDR2 :P
  • stevty2889 - Monday, May 30, 2005 - link

    #12 I think using that gigabyte ram drive for the swap file would be an excelent use for it, good idea!
  • Icehawk - Monday, May 30, 2005 - link

    I want that RAM-Disk. Here's why - I have a gig of older DDR ram that is essentially worthless. How about using the Ram-Disk for your virtual memory swap file? Ah... now you see the possible benefit?

    :)
  • Tanclearas - Monday, May 30, 2005 - link

    I thought the idea behind BTX was to improve cooling through better air flow. Why would they place the IDE cables directly in-line with the CPU, and the power and SATA cables all nearly in-line with the CPU?!

  • Matthew Daws - Monday, May 30, 2005 - link

    What I don't quite get with the solid-state drive is: Why not just increase the amount of ram you have, and let the O/S use it as it sees fit, either for a huge disk cache, or for applications if they need it. This should actually be faster, as the OS can intelligently decide what data to buffer in ram; and with 64-bit nearly mainstream, you don't have a 4GB limit.

    The only issue might be that you'll have to spend a lot more on RAM you want to put on your motherboard than the dirt-cheap stuff you'd put on the Gigabyte board; but surely 2GB of extra system ram would be better than a 4GB Ram-Drive?
  • mjz - Monday, May 30, 2005 - link

    yea, maybe if they have 8 slots and ram is 50 dollars a gig.
  • mattsaccount - Monday, May 30, 2005 - link

    The solid state drive would also be useful for photoshop/video editing scratch disks, or for the windows page file.
  • MDme - Monday, May 30, 2005 - link

    hey, you can put winXP onto that ramdisk and just have that. I mean if you use that as your OS partition, it will rock. maybe use a minimal XP install without the bloat-ware...maybe even a 512mb swapfile there. (I wonder how fast will boot times be???)

    OR

    just use the ramdisk as the swap file. that would still be a boost. (you won't have to worry about the volatile ram either)
  • AnnihilatorX - Monday, May 30, 2005 - link

    2GB should be enough for just Window

    but if you want "a" game on it... 4GB is just enough

Log in

Don't have an account? Sign up now