Our Take

Surprises are one of the things that can turn the routine of testing computer components into a few moments of excitement. We confess that we were totally surprised to find the Jetway at least the equal of any enthusiast AMD 939 board that we have tested. Who would have even considered before this review that the Jetway 939GT4-SLI-G would benchmark in the same league as the top 939 boards that we have tested, and overclock in the same league as the legendary DFI LANParty nF4 SLI. But benchmarks are benchmarks and the Jetway equaled the best Socket 939 boards we have tested, and then went on to top performance in stock ratio overclocking and reduced ratio overclocking.

There is a lot to like about the Jetway 939GT4-SLI, starting with a near ideal board layout. There is also the elegant simplicity of the 3 PCIe video slots with a dedicated x16 single video slot and an additional pair of x8 Dual/SLI video slots. The 3 slots are not overkill or a waste of board space, since even the most basic SLI board uses 3 slot spaces for the SLI video slots. The Jetway uses the same space, but the 3 dedicated slots do away with any need at all for paddles, jumpers, or switches for SLI. This simplicity probably contributes to the excellent performance that we found with the Jetway in these tests.

Add to this: processor voltages to 1.9V, memory voltage to 3.25V, a wide 200 to 400 range for CPU clock, and a complete range of memory adjustments and chipset/LDT voltages, and you have the legitimate makings of an AMD enthusiast board. The diagnostic LEDs and momentary switches are just the icing on the enthusiast cake. We've seen other boards all decked out with everything but performance, but that is certainly not the case with this Jetway - it performed as well in all our tests as we hoped that it would. Our only real complaint is that the tested BIOS did not implement the added memory ratios (433, 466, 500, 533) available with the Rev. E Athlon64 processors. However, we have asked Jetway for an updated BIOS to fix this oversight.

Some will be screaming and flaming with our recommendation here, but at a $129 web price, you should really include this Jetway on your short shopping list for Socket 939 AMD enthusiast motherboards. This Jetway delivers great value and performs very well, no matter how you measure the performance. It's nice to see a real surprise once in a while, and this Jetway will open the eyes of any buyer who approaches it with an open mind.

A great job, Jetway, and we hope that you can really get behind this board with the kind of support that it deserves. We highly recommend the 939GT4-SLI to both the non-overclocking AMD user and the AMD Enthusiast looking to reach new heights in overclocking with their new Athlon 64.

Gaming Performance
Comments Locked

46 Comments

View All Comments

  • joex444 - Wednesday, August 24, 2005 - link

    Maybe a lil OT, as it applies to any SLI board, but:
    Can you run a video card in one of the green slots and then use a PCIe RAID5 card, like the Areca x8 RAID5/6 8 port SATA card?
    I do need RAID5, I run a development web server with a SQL server on my PC.
  • Furen - Thursday, August 25, 2005 - link

    I would guess yes, since you can throw a 1x device onto 16x slot and they work fine. Of course your graphics performance will be slightly worse, but the difference should be negligible.
  • Leper Messiah - Wednesday, August 24, 2005 - link

    $129 SLi board with this kind of performance? I'm there! Dual core 3800+ Jetway mobo, and an x800xl or something for now seems to be very tempting right now...
  • slsmnaz - Wednesday, August 24, 2005 - link

    Why is an SLI board w/ an x800xl tempting?
  • OvErHeAtInG - Wednesday, August 24, 2005 - link

    Because he could upgrade to 7800 GTX/GT SLI's when the price comes down.
  • ncasebee - Wednesday, August 24, 2005 - link

    You are sure that this is the same board as the one included in EVGA's free mobo deal? If it is, I see no reason not to get this board, and save myself the money.
  • Furen - Wednesday, August 24, 2005 - link

    You could always ask EVGA directly... say something like "I've heard good things about the Jetway motherboard and was wondering if they are manufacturing it for you" or something of the sort, heh.
  • Furen - Wednesday, August 24, 2005 - link

    OK, I went into EVGA's support forums and though the motherboard is a rebranded Jetway they are pretty behement about you not using the Jetway bios. It might just be them throwing a bit of FUD at you but I just wanted to point it out. By the way, it seems that their current bios is a bit flaky on the overclocking front (Jetway's has already been fixed, it seems).
  • Calin - Wednesday, August 24, 2005 - link

    than on other boards made by Jetway. We had one board (from several bought less than three years ago, in several months) gone bad - the capacitors were dead.
    Other than that, I wonder if one could use all three PCI-E slots (having one 16x card and two 8x cards), and if not, a chipset change could solve that

    Calin
  • joex444 - Wednesday, August 24, 2005 - link

    Remember that this is just a paddle-less design. With the paddle you can't use the 2nd PCIe x16 slot if it is set to single mode; you need to switch the paddle to dual mode which cuts it to two x8 slots each physically having a x16 connector. Either way, there are only 16 usable lanes.

    It's the same thing, plug a card in the yellow and the "paddle" is set to single x16; plug a card in the green and the "paddle" is set to dual x8.

Log in

Don't have an account? Sign up now