"If you would be wealthy, think of saving as well as getting."

This quote by noted author, diplomat, physicist, and politician Benjamin Franklin describes our attitude about the ASRock ConRoe945G-DVI motherboard. While the Core 2 Duo processor series was launched in late July, the availability of motherboards supporting this impressive CPU has not been stellar. We saw a small wave of Intel 975x and P965 chipset boards at launch that are finally starting to mature from a performance and compatibility standpoint. In the meantime we have seen a few additional boards launch based on these same chipsets, along with others using the NVIDIA nForce 570 SLI and NVIDIA nForce4 SLI X16 for Intel series. We have also witnessed some old now new again chipsets come of age based on the performance potential of Core 2 Duo. The VIA PT880Pro, Intel 945P, and Intel 865 fall into the latter category, and now we add our first look at the Intel 945G chipset with Core 2 Duo.


While the 945G has been around for awhile the performance potential of the chipset is still very good, especially for the budget sector, and provides a solid platform for those interested in a mATX form factor board. The 945G will eventually be replaced by the recently released G965 chipset and we expect there to be an almost $40 difference in price between the two platforms for the time being. Whether the G965 is truly worth this premium or not we will see in an upcoming article.

In the meantime, ASRock recently shipped us their ConRoe945G-DVI motherboard for evaluation. The ASRock board is expected to sell for around $75 and brings with it a full set of features including a separate DVI card that allows for dual monitor usage with the onboard Intel GMA950 graphics chip. While the onboard video is fine for general desktop usage and surfing the Internet, it is not meant for 3D gaming no matter how many buzzwords Intel throws out in their GMA950 specification documents. Our article today is meant as brief review of this chipset's capability as implemented by ASRock when compared to a recent review of other budget chipsets. We will have further performance results from this board and others based on the mATX platform in a future roundup.


The 945G chipset used by ASRock in their ConRoe945G-DVI motherboard is over a year old, and it is paired with the Intel ICH7. Our first impression of the motherboard was very good as the layout of the board is clean and well organized for a mATX design. The chart above lists the standard feature set available when utilizing the Intel 945G (82945G) and ICH7 (82801GB) chipsets. The 945G/ICH7 combination enables full support for a single X16 PCI-E graphics slot or onboard GMA950 graphics configuration, a single HDMR slot, up to six X1 PCI-E devices, 4GB memory addressability, and native DDR2 533/667MHz memory support. This combination also enables support for eight USB 2.0 ports, HD Audio, Gigabit Ethernet support, six PCI slots, four SATA 3.0Gb/s ports, and two IDE devices. The 945G chipset does not support the Pentium EE or XE series of processors.

Now let's take a closer look at the performance this board offers.

Basic Features
POST A COMMENT

33 Comments

View All Comments

  • Gary Key - Friday, September 01, 2006 - link

    3D Performance more in alignment with the GeForce FX5600 series but with better video quality. The 6200TC would provide up to double the frame rates in Quake4 at 1024x768 HQ as an example. Reply
  • mino - Friday, September 01, 2006 - link

    I know, it's AM2 but a little mATX roundup won't hurt.

    Especially with EE SFF parts and Conroe out of the gates..

    Also I would love to see power comparison between different chipsets/boards.
    For C2D as well as for X2.
    Reply
  • dmce - Friday, September 01, 2006 - link

    Yeah i would be very interested in this. Would also be interested in a little more info on the RS600/SB600 (Radeon Xpress 1250) boards. Reply
  • dmce - Friday, September 01, 2006 - link

    Dont suppose you know if it supports 1080p?

    Would have liked to see how it coped with HD playback.

    Looking forward to the mATX reviews mentioned
    Reply
  • mino - Friday, September 01, 2006 - link

    They used it with 24inch Acer DVI LCD => it works reliably up to 1920x1200 which is the top of single-link DVI spec. Reply
  • mino - Friday, September 01, 2006 - link

    In the other word 1080p playability should depend on the CPU. Reply
  • dmce - Friday, September 01, 2006 - link

    Thanks mate. Reply
  • poohbear - Friday, September 01, 2006 - link

    just wanna say thanks for covering the budget mobos instead of the super high end stuff.:) I was really impressed w/ the asrock dualsata2, so nice to see their new stuff. Reply
  • esterhasz - Friday, September 01, 2006 - link

    Great article, tnx. Would be great to have numbers for power consumtion though. In the HTPC Arena, this is a rather interesting matter... Reply
  • Calin - Friday, September 01, 2006 - link

    Or at least subjective ratings regarding different places on the mainboard - VRM modules, chipset, ... Reply

Log in

Don't have an account? Sign up now