A few months ago at the Samsung Galaxy S 3 announcement event, I noticed another mobile editor wearing a pair of Bluetooth earbuds that were unlike any other I had previously seen. For a while now, if you wanted to use Bluetooth A2DP to listen to music, you really needed to do one of two things. Either buy an A2DP adapter that exposes a 3.5mm stereo plug, and then bring your own pair of headsets or in ear monitors, or buy a relatively expensive pair of purpose-built Bluetooth headsets and live with them. The problem has been that the overwhelming majority are bulky, on ears or awkwardly shaped over the ears models that don’t really emulate earbuds or in-ear form factor headphones. Since getting to play with the BackBeat Gos, I’ve become aware of a few other similar Bluetooth wireless earbuds, but this is a relatively new form factor I feel like a lot of people have been waiting for to come to fruition.

So when I saw the Plantronics BackBeat Go model in the wild, I knew I had to give it a shot. Reviewing headsets or earbuds isn’t my normal coverage area, but I couldn’t resist playing with a mobile accessory of some kind, and after all, anything Bluetooth is tangentially related to smartphones.

The form factor is pretty basic – two earbuds at both ends of a short cable, with an in-line controller and microphone. The earbuds are a bit oversized compared to normal ones, but this is where the BackBeat Go places the battery and microUSB charging port. On the right side, the top rubber peels off revealing that microUSB charging port underneath. Charging works either with the supplied AC adapter or any normal microUSB charger. It’s also on the right side earbud that Plantronics has located the charge and status LED, which glows orange while charging and blue when fully charged.

The BackBeat Gos are clearly designed for right-handed users, as the inline controller box is closer to the right side of the cable than the left. There’s volume up, down, an action button, and power. Also on this box is a small notch which serves as the microphone window.

The cable is rubberized and flat, not circular, and not much longer than shoulder length. The idea is to let the earbuds drape over your shoulders, with the cable going around the back of your neck. That said I’ve also worn them going forwards, with the cable hanging down in front of my face.

Inside the package there are three sets of rubber earbud sleeves, and a set of stabilizers which can fit on the side and press against the ear to hold the earbuds in place. In practice, I had a difficult time finding a size that fit and made a good seal in my ear canal. When it comes to earbuds that go into the ear, I’m more of a fan of the in ear monitor approach which involves foam that you squeeze down, insert, then allow to expand, rather than simple rubber seals. Getting a good seal is important because it both is going to impact the attenuation of ambient noise, and defines the resonant cavity inside your ear canal. Without a good seal, things will sound fundamentally different. Unfortunately the silicone tips are the BackBeat Go's biggest shortcoming, as I find myself constantly hunting through the three available sizes to no avail – supplying something foam based which expands would go a long way to fixing this problem.

Each earbud is definitely heavier than an otherwise passive one, but this is because there’s both a Bluetooth receiver SoC, battery, and other components inside the modules. The result is that the two are definitely larger than normal, but not so heavy they fall out of the ear.

The BackBeat Go has an internal lithium ion battery which charges over microUSB, and draws around 170 mA at 5V to do so. Bluetooth 2.1 + EDR is supported, with profiles A2DP 1.2, AVRCP, HFP v1.5, and HSP v1.1. Unfortunately the BackBeat Gos don’t support the apt-X Bluetooth audio codec, instead I saw subband codec (SBC) used on the platform I could get this information on.

Inside the BackBeat Go
POST A COMMENT

29 Comments

View All Comments

  • Dariusbird - Monday, August 27, 2012 - link

    How do you think these Plantronics stack up against my LG HBS-700? Just might be time for an upgrade. Reply
  • dsumanik - Monday, August 27, 2012 - link

    I own the lg tone tones, and jaybird freedoms, the lg tones have better reception, battery life, plus the vibrating feature is nice so you can leave your phone on the table and walk around the house....not having to keep the earbuds in your ear the whole time to listen for a call.

    The jaybird freedoms are more sweat proof, but changing songs on them is a pain while you are jogging and the sound quality is crap.

    Ive owned many headsets the hbs700 is hands down the best in almost every department, battery reception and sound quality/noise cancellation....to the point when i make a call on my regualr iPhone, people complain and say they cant hear me very well, until i switch back to the headset.

    These all in one style earbuds are sleek and convenient...but you trade reception and battery life for the convenience.

    Another set to check out if you like this style is novero rockaways
    Reply
  • lockey813 - Wednesday, October 17, 2012 - link

    Would you recommend the hbs700 or the bbs730? Thank you Reply
  • lockey813 - Wednesday, October 17, 2012 - link

    sorry typo. I mean the HBS-700 or the HBS-730 Reply
  • Bob-o - Monday, August 27, 2012 - link

    With that poor battery life I think I'll stick with my Voyager 855's for now.

    http://www.amazon.com/dp/B000UBNFT2

    Not the best audio quality. . . but who would use BT for audio quality anyway? Break out the high-quality wired set for that.
    Reply
  • OCedHrt - Monday, August 27, 2012 - link

    I'm really surprised at the recent articles on this form factor being new or some kind of break through. Sony's had this exact form factor for several years now, but obviously failed to market it (no wonder they're losing market share left and right). You can get one now for about half the price of this one (though it may be a knock-off) on eBay or something. Reply
  • Brian Klug - Monday, August 27, 2012 - link

    Which model? Somehow I never ran into it, yet it has been the form factor I've been looking forward to for quite a while now. I guess this was my first exposure to it, for whatever reason.

    -Brian
    Reply
  • Impulses - Monday, August 27, 2012 - link

    The IS800 mentioned below have been around for at least three years I think, used to retail for over $200 tho. Battery life still kills the value for this form factor IMO.Rather just use a clip on receiver with longer battery life and the upside of being able to plug in the headphones directly when it runs out. Reply
  • Brian Klug - Monday, August 27, 2012 - link

    Ahh that's a good point, hmm I really need to give those a try. I'd like to just try all of them out at once honestly, since using this form factor is something I'd like to do on a daily basis.

    -Brian
    Reply
  • OCedHrt - Tuesday, August 28, 2012 - link

    http://store.sony.com/webapp/wcs/stores/servlet/Pr...

    That price is crazy though, but I think Sony is just gouging. I bought mine in Taiwan and it was about $60 retail (2000 TWD) with a hard case. I then lost it going through airport security and found myself another one online (with a soft pouch) for about the same price. I'm partially convinced the one I got online is a fake though, because I remember my original one having multi-point but the new one does not support it. I have to re-discover/connect every time I switch devices.

    Here it is for 1750 TWD (http://tw.page.bid.yahoo.com/tw/auction/b80318099;... yet they sell it for $100+ on Amazon.
    Reply

Log in

Don't have an account? Sign up now