Motherboards Memory Storage Cases/Cooling/PSUs IT Computing Displays Mobile Mac CPUs & Chipsets Video Digital Cameras Linux Gadgets Systems Trade Shows Guides Home Increase Font Size Decrease Font Size Change Page Size
Gigabyte GA-X38-DQ6: An early look at X38
Gigabyte GA-X38-DQ6: An early look at X38
Date: September 4th, 2007
Topic: Motherboard
Manufacturer: Gigabyte
Author: Gary Key
 
 

First Thoughts

It is hard to find any faults with the X38 chipset at this time. Even though we are working with an engineering sample that has been around the block a few times and an early engineering BIOS that is designed more for debugging the chipset than providing top performance, it still manages to outperform a fairly mature P35 equipped motherboard that offers excellent performance in its own right.

We are generally impressed with the Gigabyte GA-X38-DQ6 motherboard and look forward to providing updated results with our retail board once the release BIOS arrives in the lab. Even in its early state, the performance is very good and stability has been excellent throughout several days of 24/7 benchmark testing. In fact, we found the stability, performance, and compatibility of this early engineering sample to be better than several retail boards we are currently testing.

Although in early testing it appears the power consumption of this board is up to 18W higher than a similarly equipped GA-P35-DQ6 board, we did not find the increased thermal loads creating any issues during testing. With the added number of PCI-E lanes and the same process technology, we didn't really expect a decrease in power requirements, though it would have been nice to get that as well. We will provide full thermal and power consumption numbers shortly, but we can say without a doubt that the X38 MCH will bring a new meaning to the word "heat" when overclocking.


Speaking of overclocking, in testing to date with the engineering sample, we were able to match or exceed the levels reached with our best P35 motherboards when utilizing the quad core processors. We even managed several benchmark runs at 510FSB with our Q6600 set at an 8x multiplier and additional cooling. Also of note, at least with this particular board setup, we generally could run our CPU and memory voltages slightly lower at the same settings as our P35 boards. Dual core performance with a wide variety of chips was excellent also, but we will reserve final judgment of the capabilities of the chipset and board until we have a production release BIOS and additional retail boards. For now, we look forward to providing those results in the near future.

Despite being faster than the Intel P35 in our limited test suite, the percentages were minor to say the least. Expecting a large performance leap in stock performance is generally unrealistic with a new chipset release. The most promising results are in our Sandra unbuffered, MemTest, and SuperPI 1.5 results where we can see the strength of this chipset. It is still difficult to determine exactly what the performance improvements will be over the P35 chipset, but for now most of the motherboard suppliers think an average of 3% to 5% is the correct range and it should only improve as the BIOS matures. This does not take into account the projected improvements in overclocking or CrossFire performance, areas that the X38 is supposedly designed to excel in with the right components.

In the early stages, it certainly appears that Intel has another great enthusiast chipset on its hands and a worthy successor to the 975X. Of course, only time and retail boards will prove us right or wrong, but our early guesstimates indicate this chipset should have a long life... well, at least until Nehalem appears but that is a story for another time.

Home

 
  Index

Tools Share
Find lowest prices Find the lowest prices
Digg   del.icio.us   E-mail  
Print This Article Print this article  

26 Comments - Last by TokyoFerret, 668 days ago
Username:
Password:
Fixes... by Guuts, 808 days ago
Gary,

Page 2: Third paragraph from the bottom, should have (DDR2-1066) and not (DDR-1066).

Page 3: Missing graphic at the top of the page, text starting off with "memory-lg.png memory-sm.png" is probably the cause?

Page 5: Chart 2 (Sony Vegas) either has the stock speed bars' labels reversed, or your text summary is incorrect, as the chart doesn't show the Gigabyte board ahead in both stock and overclocked speeds.

Page 7: Second paragraph, last sentence, "...better than several retails boards" should just be "retail".

Good article overall, though I was expecting a bit more of an improvement over the P35. I bet there will be a nice boost over the 975X when we see the full review, however. Thanks for the early look, Gary.

Now...where is the P35 board roundup? :-p


Reply
RE: Fixes... by JarredWalton, 808 days ago
Hi - sorry about the graph missing... that was my mistake. You can blame me for a few other missed typos as well if you'd like. I'm not sure on the Sony Vegas chart if there's some sort of labeling error or if we need to correct the text, so I'm leaving it alone.

--Jarred

Reply
Chart error by TA152H, 808 days ago
The chart "Media encoding - Sony Vegas" makes no sense. I think you got the stock performances twisted.

Also three to five percent over the P35 sounds incredible, as in not credible. Especially with the Penryn (with it's bigger cache). When the motherboard makers talk this, you should try to find out what processor they are talking about. Maybe on a 512K processor it can reach it, but on a 4 MB processor, on most benchmarks, it doesn't sound realistic at all. Well, it also depends what they are comparing it to. It says the P35, but maybe they meant the 975X, which is much more likely. Crossfire, of course, will be much higher, but how many people are actually using this? It's a very, very low percentage. So, I think people are going to be disappointed again, like they were with the Penryn, because of misguided expectations. Penryn, like x38, is a great product, it's a shame people lose that because of these unrealistic expectations. Still, anything is possible, but if it averages 4% on most applications against the P35, on a Penryn (will enthusiasists buy the Conroe when it comes out?), I'd be very surprised.

One suggestion, when you do the final review, run it with a Conroe-L as well. Why would an enthusiast site run this as well? Well, if I needed a machine, right now (as in I had one computer and it died), I would buy it for $40 and then buy a Penryn when it became available, or cheap, and then use it in a low power computer. You might see the 3-5% claim have a chance on a small cache processor. That's probably what they were talking about, without actually wanting to say it.


Reply
RE: Chart error by phusg, 808 days ago
quote:

, run it with a Conroe-L as well. Why would an enthusiast site run this as well? Well, if I needed a machine, right now (as in I had one computer and it died), I would buy it for $40 and then buy a Penryn when it became available, or cheap, and then use it in a low power computer.


Sounds an interesting upgrade path. But aren't Conroe-L's the Celeron 4xx's which are socket 478? Do we even know what socket Penryn will be?

Reply
RE: Chart error by TA152H, 808 days ago
Conroe-L is LGA 775, same as Penryn will be. I suspect almost any motherboard being made now will work with the Penryn, or whatever the desktop version is called, really. I can't keep up with these stupid names AMD and Intel come up with for their processors. The ass that thought of Barcelona should be sterilized. What an absurd name. If they had any brains they might make code names and add something like -L for light, -M for mobile, -S for server, -QM for Quad Mobile, etc...

Instead, they have these horrendous code names, which are suitably replaced by horrendous model numbers. I really can't keep track. Pentium III 1 GHz was so much easier to remember.

Reply
more importantly... by jay401, 808 days ago
How does it compare to the previous gen motherboards almost everyone is running?
Is it really worth an upgrade from 650i/680i/P965/975X?

That's really what matters.

Reply
Did the back connector layout change from Computex? by Vidmar, 808 days ago
From the pictures we saw from Computex this board had an eSata connector on the back, but now I don't see one. Instead it looks like two firefire ports are there.

I do love that they have six USB connectors on the back. It's the one feature that I appreciate on my LanParty nF4 Ultra-D.

I would also love to see a direct comparison between the DDR2 and the DDR3 (GA-X38T-DQ6) version of this board. I wonder if the x38 would make a difference in that area.

Thanks for the preview.

Reply
RE: Did the back connector layout change from Computex? by Jodiuh, 808 days ago
Actually, I think there's 8 USB ports! It's good to see my recent purchase of Abit IP35 Pro will serve my needs well into 2008 too. :D How much longer will we wait for the P35 roundup?

Reply
RE: Did the back connector layout change from Computex? by strikeback03, 808 days ago
Looks to me like there are 4 USB, 4 eSata, 2 RJ-45 and 2 Firewire.

Reply
RE: Did the back connector layout change from Computex? by Missing Ghost, 808 days ago
I think you're right.

Reply
Comments Page 1 of 3

Unlicensed Software at Your Last Company
Anonymously Report Unlicensed Software with Our Form Now. Get Up to $1 Million.
We Buy Laptop and PC Memory! Sell to Us!
Min of 25 pieces required. Call us today at 239.354.1230.
Special Offer from The Economist
Get 12 issues of The Economist for $12. US subscribers only.
Free Forrester Risk Management Report
Demystifying Enterprise Risk Management. Download Free With Registration.
Download Microsoft Visual Studio ® Team System
Streamline Dev processes, Reduce time to market. Try Microsoft Visual Studio Team System, FREE!




Latest news by
DailyTech

 November 20, 2009

Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank

 November 19, 2009

Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank


Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Blank
more CPU & Chipset Discussions



pipeboost
Copyright © 1997-2009 AnandTech, Inc. All rights reserved. Terms, Conditions and Privacy Information.
Click Here for Advertising Information