Alpha PEP66 with YS Tech fans
 
 
The PEP66 is Alpha's latest model for FCPGA CPUs. It is designed especially for CPUs installed in Slotket adapters. In fact, the PEP66 looks a bit like a P7125 cut into half. Like all current Alpha heatsinks, it features a copper inlay to help spread the heat across the heatsink.

A look at the huge fins of the PEP66:
 

The fan
 

For comments on the YS Tech fans used for this combo, please see the PAL6035/YS Tech section
 
 

Installation
 
 

Like all Alpha heatsinks, the PEP66 comes in disassembled form (but with a small instruction booklet).
 
 

 
Conclusion
 
 

Despite its larger size, the PEP66 does not outperform the FC-PAL6035, at least not in any measurable way. Both provide the same (excellent) performance. The PEP66 does have an advantage over the FC-PAL though: It is not as high, and therefore less likely to block DIMM slots when installed on a Slotket adapter. On our test motherboard, an ASUS P3B-F, it blocked only one DIMM slot. On the other hand, the PEP66 is not very suitable for socket motherboards.

Like all heatsinks with YS Tech 26 CFM fans, the PEP66/YS Tech is excessively loud, and like all Alpha heatsinks, it is expensive. The PEP66 is even more expensive than the FC-PAL.

 
Alpha PEP66/YS Tech at a glance
Fans: One 60x25mm YS Tech
Fan rpm (measured): 4450
Weight: 330g
Height: 62mm
DIMM slots blocked on P3B-F: 1
Price: Around $35
Advantages
  • excellent cooling performance
Disadvantages
  • high price
  • very loud
  • not suitable for socket motherboards (only for Slot 1 boards with Slotket)
Alpha (FC-)PAL6035MUC with Sanya Denki Fans Alpha PEP66U with Sanyo Denki Fans
Comments Locked

0 Comments

View All Comments

Log in

Don't have an account? Sign up now