Ease of Installation

Just like in the last review, Corsair's Asetek-based products (the H90 and H110) both install in the same fashion, and in fact if you even have a mounting kit from a previous Asetek-based cooler you'll be able to basically just reuse it (which made my life a lot easier).

As a refresher, the Asetek-based coolers use a single metal ring that's attached through the mounting holes on the motherboard to a backplate. From there, you essentially insert the waterblock through the notches and twist it so the notches line up, then screw down the ring, locking the waterblock into place. It's a pretty simple affair and I still ultimately prefer it to the CoolIT method of cooler mounting. It just feels more precise and more secure.

Swiftech, on the other hand, employs the CoolIT backplate for mounting the H220, but remember that the product is their own. In fact, when you open the box, the H220 is almost entirely assembled already, with the fans attached and the backplate lightly secured to the waterblock. Swiftech tried to make installation easier by including four small adhesive pads on the backplate: just peel off the protective tape and then stick the pads to the back of your motherboard (after lining up the screw holes) and you should be off and running. Please, do yourself a favor and take the pads off. Trying to do this without the benefit of adhesive is nightmarish, since the mounting screws are already attached to the waterblock.

Ultimately, these coolers are both pretty easy to install and I have to be honest, I vastly prefer installing a waterblock instead of a large air cooler. Waterblocks and radiators are just easier to install because only the radiator is heavier than a good air cooler, and the sharp fins are basically kept away from your hands. Swiftech smartly employs adhesive on their backplate which does help, but unfortunately also runs the risk of wearing out over time.

Introducing the Second Wave of Closed Loop Coolers Testing Methodology
POST A COMMENT

53 Comments

View All Comments

  • chaos215bar2 - Monday, February 04, 2013 - link

    I'm not sure why you got the impression that the H220 couldn't compete. Overall, I got the impression that the H220 was one of the best coolers reviewed. It just sacrificed a little performance for a significant reduction in noise. Reply
  • ypsylon - Friday, February 01, 2013 - link

    I would jump into H220 immediately. Drooling on it since first news appeared. Unfortunately there is small issue - nobody selling this thing in Europe. I inquired in few places across EU and so far nobody is eager to jump on it. Importing it from US is out of the question as I could build full custom loop for money spend on H220+S&H+VAT+2.5% duty fee. Still I have ~40 days ahead before planned WS switchover. If I can get H220 in that time I would, otherwise going with H100i + 4 AeroCool BlackSharks. Not interested in AIO 140/280. Reply
  • Nickel020 - Monday, February 11, 2013 - link

    Actually, highflow.nl already has it on pre-order and usually offers quite reasonable shipping rates across Europe:
    http://highflow.nl/watercooling-sets/cpu-sets/swif...

    More shops should be listing it once it actually becomes available.
    Reply
  • BrightCandle - Friday, February 01, 2013 - link

    Its not uncommon for a custom loop to get down to +25C at load, so these bigger radiator designs are starting to get really close to the performance of going fully custom at a lot less cost and hassle. Reply
  • ShieTar - Friday, February 01, 2013 - link

    Sure. Now if those would just be provided for the 225W GPU instead of the 77W CPU, they might get actually relevant for a gaming computer. Reply
  • pcfxer - Friday, February 01, 2013 - link

    BINGO!

    This man ^^^^^ has got it. Why the hell aren't they hooking these up to GPUs? Does a closed loop kit for GPUs even exists? I've had one video card die from a heavy HSF combo and I still hate seeing that much flex in card.

    A closed loop setup is literally perfect for this. Any pump noise and fan noise from that would be worth it (if still reasonable, I normally hunt for options on SPCR).
    Reply
  • Death666Angel - Friday, February 01, 2013 - link

    There is the "Arctic Cooling Accelero Hybrid" and you can buy mounting kits for these CLCs to install on your GPU of choice. No full body CLCs I am aware of other than that. And since there are so many different layouts and removing the heatsink of most graphics cards voids the warranty, the market seems very small compared to these CPU CLCs. Reply
  • Runamok81 - Sunday, February 03, 2013 - link

    With the help of custom brackets from triptcc.com modders have been installing closed loop GPU coolers for years. Reply
  • Jeaux Bleaux - Saturday, February 02, 2013 - link

    From the article you didn't read; "At CES, the H220's pump was demonstrated keeping a pair of GTX 680s and an i7 cool." Reply
  • MadAd - Friday, February 01, 2013 - link

    1- Corsair dropped the ball with me with my H60 recently. The pump was shrieking until i installed a fanmate to limit it to about 2k rpm (my friends coolit works at about 4k normally). The through board fittings were so sloppy I had to find 4 small washers to brace the board against the clamp or suffer less pressure on the cpu mount and to cap it all the fan they supplied committed both sins of a bad silent fan, high turbine noise AND a ticky motor noise. Probably one of the worst fans ive ever owned (and ive spend hundreds on specialist panaflos, scythes etc through the years).

    2- I would like to see reviews of these done in a fully loaded system too. That puny board with no GPU does not represent a normal PC at all. Yes punypc is good for isolating just the cooling hardware, so why should this matter? Theres a part of these ongoing reviews that seems to have been overlooked, someone using consumer friendly closed loops are likely using this for case cooling in some way too, thus a fully loaded system running a gaming bench say, would add heat to the system and show thes coolers in a different light, eg where they start to break down.

    Thats the enthusiast end, on the other end with the growth of ITX and shelf size PCs my mind is not whether I can cool something in isolation, its whether I can use a single 120mm closed loop to do the whole system. 1 fan for the whole box, and that cant really be replicated in that test pc there either.

    Just a few thoughts, no complaints, im more than happy with the reviews here. Thanks again for all the hard work.
    Reply

Log in

Don't have an account? Sign up now