Intel has finally filled out the Sandy Bridge E lineup by releasing the Core i7-3820. The initial Sandy Bridge E lineup launched back in November 2011 and it consisted of two SKUs, the i7-3960X and i7-3930K. While the i7-3820 wasn't released until this week, we reviewed it over a month ago, so head there for a longer analysis. The table below summarizes the current Sandy Bridge E lineup:

Processor Core Clock Cores / Threads L3 Cache Max Turbo Max Overclock Multiplier TDP Price
Intel Core i7 3960X 3.3GHz 6 / 12 15MB 3.9GHz 57x 130W $999
Intel Core i7 3930K 3.2GHz 6 / 12 12MB 3.8GHz 57x 130W $583
Intel Core i7 3820 3.6GHz 4 / 8 10MB 3.9GHz 45x 130W $294

The short summary is that i7-3820 is Sandy Bridge E on a budget. In terms of CPU performance and price, it's equivalent to the i7-2600(K) but provides higher I/O performance due to the quad-channel memory and 40 PCIe 3.0 lanes. Anand summed it up nicely in his review, so we'll just repost here.

There are three reasons why you'd want the Core i7-3820:

  1. You need PCIe 3.0 today and/or you need more PCIe lanes than a Core i7-2600K can provide.
  2. You need tons of memory bandwidth for a particular application.
  3. You want a 2600K but you need a platform that can support more memory (32GB+).

So in general, most users will be better off with a LGA 1155 based platform. While the i7-3820 is actually cheaper than the i7-2600K, the total price of the platform is not. LGA 1155 based motherboards go for as little as ~$50 (e.g. Gigabyte GA-H61M-DS2). If you want more features such as Intel Rapid Storage Technology, you can get a Z68 based motherboard for around $90 (e.g. ASRock Z68M/USB3). In contrast, the cheapest LGA 2011 based motherboard starts at $210. Unless you benefit from the extra features that Sandy Bridge E offers, your money is better spent else (e.g. on an SSD).

Source: Intel

POST A COMMENT

30 Comments

View All Comments

  • Hector2 - Tuesday, February 14, 2012 - link

    Since the TDP hasn't changed, it's pretty clear that Intel is recovering 6-core i7-39xx units that have 1 or 2 defective cores and selling as 4-core. AMD has done this with their many Core units as well. Reply
  • Kevin G - Tuesday, February 14, 2012 - link

    Actually all the six core socket 2011 chips are binned 8 core chips. I suspect yields are good enough that Intel wouldn't need to cripple additional cores on their larger chips. Various reports are indicating that this is a new die 294 mm^2 in size. Reply
  • Kristian Vättö - Tuesday, February 14, 2012 - link

    That's true, this is a new die. Anand covered this in our review (see the table)

    http://www.anandtech.com/show/5276/intel-core-i7-3...
    Reply
  • MySchizoBuddy - Thursday, February 16, 2012 - link

    are their any immediate plans for the chipset to include PCIe 3 as well. Reply
  • crimson117 - Tuesday, February 14, 2012 - link

    Regarding the CPU image and others like it, sharpie does offer thinner permanent markers which would be easier to write with:

    http://www.sharpie.com/enUS/Pages/ultra-fine-point...

    Just sayin' ;)
    Reply
  • Kristian Vättö - Tuesday, February 14, 2012 - link

    Haha, you need to bug Anand about this, it's his picture and sample ;-) Reply
  • Taft12 - Tuesday, February 14, 2012 - link

    Yes, but do you know Anand's handwriting well enough to out him as the perpetrator of this bad penmanship :D Reply
  • Etern205 - Tuesday, February 14, 2012 - link

    If you imagine to look at it from bird's eye view. It's like someone doing the Chinese ribbon dance. :D Reply
  • JarredWalton - Tuesday, February 14, 2012 - link

    If I'm not mistaken, Intel is the one that writes on the chips -- but then again, it might be Anand. Reply
  • Etern205 - Tuesday, February 14, 2012 - link

    Seen that type of hand writing before on this site, so I doubt it's Intel, but if it was. I wonder how much that person gets paid just to write model numbers on ES CPUs to be sent out for reviews. Reply

Log in

Don't have an account? Sign up now