Where I think Rosewill has made major progress from the Thor v2, and to a lesser extent the Blackhawk Ultra, is in the aesthetics of the Throne. The Thor v2 is an incredibly powerful case with a fairly goofy look to it; the worst I can say about the Throne is that it reminds me of the Shredder from Teenage Mutant Ninja Turtles.

The front of the Throne is actually pretty slick in my opinion. While Rosewill cuts costs using a plastic fascia for the front and top panels, it doesn't look terrible. There are two large vents that allow the front intake fans to breathe, and then a door hides the reset button, the toggle for the red LED lights in the two front fans, and the three 5.25" drive bays. The door opens to the right by default but can actually be removed and rotated, a welcome addition.

Get to the top of the case and you see the Throne's bread and butter: a flat tray indented into the panel holds the six generously spaced USB ports (two 3.0 and four 2.0) along with the hotswap drive bay, audio jacks, power button, and sliding fan controllers. There's also a sliding vent mechanism similar to what we saw on the Thor v2.

The right side panel is solid steel while the left side panel includes plenty of ventilation and a beefy 230mm intake fan, which blows pretty much directly over the expansion slots. Note that this fan is thick; the power leads for the video cards I installed cleared it, but only just. If you're using an unusually tall enthusiast card (think EVGA Classified or ASUS Mars) you may very well run into problems with the intake.

Removing the side panels is easy; they're both held into place by two thumbscrews, and they're hinged. When you get inside the Throne, everything is pretty business as usual. This is an extremely standard ATX enclosure design. With no swappable drive cages, the ten drive trays will undoubtedly feel at least a little excessive, but the Throne is designed to hold just about everything. I think it's interesting how much 5.25" drive bays have been deprecated; there are only three, all with toolless clamps. Meanwhile, space behind the motherboard tray isn't copious but it's acceptable, and the hinged side panels ensure it never becomes a serious issue.

What I appreciate about the Rosewill Throne is its clarity of purpose. The cooling design isn't especially elegant but I don't get the feeling it was ever intended to be; this is a design that's about getting as much air into and through the case as humanly possible. Similar to the Thor v2 and Blackhawk Ultra, we're again dealing with a brute force approach to cooling. I'm still not entirely sold on the fit and finish and build quality, but you don't buy Rosewill cases for aluminum front panels, you buy them because you need a lot of cooling power at a good price.

Introduction Assembling the Rosewill Throne
POST A COMMENT

29 Comments

View All Comments

  • djshortsleeve - Friday, August 02, 2013 - link

    Another ugly case... Reply
  • piroroadkill - Friday, August 02, 2013 - link

    I don't know, ever since I saw the Cougar Challenger, I think my idea of an ugly case has been re-calibrated. That's an ugly case. This is merely a bit tacky. Reply
  • AravindA84 - Friday, August 02, 2013 - link

    I'm going to have to agree with piroroadkill
    "I don't know, ever since I saw the Cougar Challenger, I think my idea of an ugly case has been re-calibrated. That's an ugly case. This is merely a bit tacky."

    The Throne looks pretty baller imo, especially when it's modded. It lends well to liquid cooling because of all the space, and well, it has the potential to be... as i stated before... baller.
    Reply
  • Voo - Friday, August 09, 2013 - link

    If you have to use a word that I have to look up on urbandictionary to describe a case it's probably a bad sign.

    I really don't know why half the enthusiast cases look like they were designed by adolescent boys :(
    Reply
  • szimm - Monday, August 05, 2013 - link

    It looks like it was designed by a team of 13-year-old boys who just watched Transformers for the first time. Reply
  • BryanDobbins - Saturday, August 17, 2013 - link

    my neighbor's mom makes $72/hour on the internet. She has been unemployed for 7 months but last month her pay check was $19114 just working on the internet for a few hours. Read more on this web site... http://goo.gl/qHdAQ4 Reply
  • abrowne1993 - Friday, August 02, 2013 - link

    Kind of looks like a Silverstone Raven rip-off. Reply
  • SergeyN - Saturday, August 03, 2013 - link

    +1 Reply
  • JDG1980 - Friday, August 02, 2013 - link

    You mentioned the Raven RV04, but SilverStone has had the Fortress FT04 on sale for a couple weeks now, which has a very similar layout but should offer lower noise (with acoustic padding) and better fit and finish. Any chance we'll be seeing a review on that soon? Reply
  • SergeyN - Saturday, August 03, 2013 - link

    I want SilverStone FT04 review too! Reply

Log in

Don't have an account? Sign up now