Thermaltake Level 10 GT: Monument to Excess
by Dustin Sklavos on July 26, 2011 11:50 AM EST- Posted in
- Cases/Cooling/PSUs
- Thermaltake
- Full-Tower
Testing Methodology
For testing ATX (and larger) cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
| Full ATX Test Configuration | |
| CPU |
Intel Core i7-875K (95W TDP, tested at stock speed and overclocked to 3.8GHz @ 1.38V) |
| Motherboard | ASUS P7P55D-E Pro |
| Graphics Card | Zotac NVIDIA GeForce GTX 580 (244W TDP) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD Western Digital Caviar Black 1TB SATA 6Gbps Samsung 5.25" BD-ROM/DVDRW Drive |
| CPU Cooler | Zalman CNPS9900 MAX with Cooler Master ThermalFusion 400 |
| Power Supply | SilverStone Strider Gold 750W 80 Plus Gold |
A refresher on how we test:
Acoustic testing is standardized on a foot from the front of the case, using the Extech SL10 with an ambient noise floor of ~32dB. For reference, that's what my silent apartment measures with nothing running, testing acoustics in the dead of night (usually between 1am and 3am). A lot of us sit about a foot away from our computers, so this should be a fairly accurate representation of the kind of noise the case generates, and it's close enough to get noise levels that should register above ambient.
Thermal testing is run with the computer having idled at the desktop for fifteen minutes, and again with the computer running both Furmark (where applicable) and Prime95 (less one thread when a GPU is being used) for fifteen minutes. I've found that leaving one thread open in Prime95 allows the processor to heat up enough while making sure Furmark isn't CPU-limited. We're using the thermal diodes included with the hardware to keep everything standardized, and ambient testing temperature is always between 71F and 74F. Processor temperatures reported are the average of the CPU cores.
For more details on how we arrived at this testbed, you can check out our introductory passage in the review for the IN-WIN BUC.
Last but not least, we'd also like to thank the vendors who made our testbed possible:
Thank You!
We have some thanks in order before we press on:
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory we used to add memory thermals to our testing.
- Thank you to Zalman for providing us with the CNPS9900 MAX heatsink and fan unit we used.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Western Digital Caviar Black hard drive, Intel Core i7-875K processor, ASUS P7P55D-E Pro motherboard, and Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply.
Facebook
Twitter
RSS
46 Comments
View All Comments
Skott - Tuesday, July 26, 2011 - link
Performance wise it may be good but its not what I would call a sleek case. Beauty is in the eye of the beholder though. It looks rugged however. More like something you would take out and carry around every day in a work environment. Not that I would want to carry it around every day. It may look rugged, be rugged, but it would also be very heavy and impractical for that.jsbiggs - Tuesday, July 26, 2011 - link
Nice review, but I have a problem with the graphs. Maybe it's just my eyes, but I absolutely cannot read the white text on the bright yellow bar representing the Level 10 GT. The darker yellow is fine, but when the brightness goes up, I just can't tell what the numbers are. You can easily infer the performance relative to the other offerings, but would be better if you could read the number.tzhu07 - Tuesday, July 26, 2011 - link
I still prefer the simplicity of something like a R3 Define case or Lian Li. The Level 10 is incredibly tacky.Tetracycloide - Tuesday, July 26, 2011 - link
I can't say I've ever seen a steel and plastic enclosure that was worth over $200 before reading this article and afterward. Still no.StickyIcky - Tuesday, July 26, 2011 - link
Am I the only one that thinks this thing looks like a severely mutated Playstation 2?danjw - Tuesday, July 26, 2011 - link
If you are going for air cooled, I personally would go for the Silverstone FT02. If liquid cooled, I think the HAF X would be my choice. Personally I don't really like the looks of either the HAF X or Level 10 GT, but from a utility standpoint the HAF X wins in my book. It would be great if you guys would do a review of it.Kevin G - Tuesday, July 26, 2011 - link
Having purchased on of these a few months back, I can say that it isn't perfect but pretty good.First the negatives. Unlike this review, I took advantage of the fact that an EATX motherboard will fit into this case. Fitting such a large motherboard into the chassis isn't easy. I was further hampered by needing to remove some of the standoffs which wasn't that big of a problem. However, I discovered that the paint on the motherboard tray is a bit thin as I scratched a spot near one of the stand offs. Getting the IO panel properly mounted with an such a large motherboard is pain. Similarly, mounting a large PSU is also a pain. Another oddity is that the rear 120 mm fan doesn't match the rest of the fans which color changing LEDs. The feet rotate 90 degrees which is generally a good thing overall but they're very easy to move and feel like they're break if some one stubbed them while walking by. The USB 3.0 ports are nice but to use them on most motherboard you'll need to have them plug into the rear IO panel instead of a header on the motherboard. I wish ThermalTake included a USB2.0 header or USB3.0 header adapter so that keeping the USB 3.0 cable internal was an option (I have such an adapter from elsewhere and it works rather well).
Now for the good news. It is very quiet and it manages to keep my build cool. The ability to adjust the air flow of the side fan is a very, very nice feature to help keep a high end GPU cool. The side panel uses a novel approach to cable management with regards to the side fan: opening up the door turns off the fan due to a series of pins that don't connect when open. Speaking of the side panel, it locks independent of the hard drive bays. There is no actual back plane for the hard drives which for a consumer case works rather well. You can use you own power and data cables to each individual drive if you so choose while retaining removability. The case is large but the face that it has a handle makes moving it relatively easy. Overall I do like the case as it is functional, quiet and good looking in my eyes.
etamin - Tuesday, July 26, 2011 - link
With that many mesh panels, it looks like a nightmare to dust out. I didn't see anything in regard to filters either.Call me shallow, but if a case doesn't look good (exemplified by this one), it doesn't matter how user-friendly, upgradable, cool, and efficient it is...it sure as hell isn't going in my room.
mlosee222 - Tuesday, July 26, 2011 - link
I'd be interested to see how these new fangled cases hold up to the classic Antec 900. Often imitated but never duplicated.Money Loo - Tuesday, July 26, 2011 - link
Loved the article, per usual. However the choice of yellow for the bar graphs makes it difficult to read the numbers in them. Sure, I can sort of ascertain what it might be by looking at the other numbers above and below it, or by holding ctrl+mouse wheeling up to make them bigger. Just a small nitpick in an otherwise great write up.