ASUS ROG Press Conference: Motherboards

For at least every Computex I have attended, ASUS have put on a show – the ROG press conference.  This is ASUS’ opportunity to showcase their gaming range, the updates to the gaming range and is definitely a spectacle for the eyes.  This year there are a number of items that certainly pique my interest.

As expected, the ROG motherboard range we have seen already were showcased – the Maximus VI Hero, Gene and Extreme.  Typically part of this range is the Formula, which was announced today.

As with the Maximus V Formula, ASUS are carving out a niche for the Formula – it is the gaming motherboard to have, much like the Extreme is the performance motherboard to own.  On the Formula this generation, the most obvious improvement is the Formula Armor.  This combination backplate and frontage is designed to help rigidity – ASUS understand that high-end users going after the Formula are going to be big GPU gamers, where the GPUs can weigh 2 pounds or more.  This armor is designed to help make sure the motherboard does not bend when subject to these heavy weights over long periods of time.

The Formula also improves upon audio, with an upgrade to SupremeFX – we have the Realtek ALC1150 audio codec for the rear with a front-panel CirrusLogic DAC for 120 dBA SNR, all with improved EM shielding, filter caps and headphone amplifiers for 600 ohm headphones.  The heatpipe arrangement in the power delivery gets an upgraded design (codename ‘CrossChill’), and the mini-PCIe combo gets an upgrade, with instead of mSATA we have the first M.2 connector on a motherboard.  The Formula also comes with 802.11ac as part of the combo card.

With the ROG motherboard range, ASUS had three models – over the past few weeks we learned this had improved to four with the Hero.  We can now make that range a total of five motherboards, with the announcement of the Maximus VI Impact, the mini-ITX model.

If our readers remember back to my X79 ROG review of the range and the brand, we had an interview with Kris Huang, the PM for the ROG series.  I quizzed him on the possibility of a mini-ITX ROG motherboard, and the response was fairly non-specific.  Now it is clear that at the time they had had the idea internally and were developing it into the Impact we see today.

So with a mini-ITX SKU, measuring 17cm x 17cm, there is little space to provide the more typical ‘gaming’ features.  Despite this limitation, ASUS have provided the Impact with more innovation than you can imagine.

So it was perhaps predictable that the ROG mITX would have power delivery on a daughter board at right angles to the motherboard, much like what we saw on the P8Z77-I Deluxe.  What was not predicted is the SupremeFX Impact – a long extensive card for the IO with SupremeFX style audio.  In this card we get the SupremeFX shielding, high-end filter caps and headphone amplifiers, much like the Formula.

The Impact also has the mini-PCIe combo card, and I am in the process if this is a model for users’ own WiFi or if it is the same as the Formula.  We also get an additional card for the rear IO with integrated two-digit debug, power/reset buttons and a Clear_CMOS button.

No word on pricing or release date for either model, but I would expect within a month or two for both to hit the shelves.

POST A COMMENT

27 Comments

View All Comments

  • 457R4LDR34DKN07 - Tuesday, June 04, 2013 - link

    That is one sexy mitx board. Reply
  • steve_rogers42 - Tuesday, June 04, 2013 - link

    Hoping to spot ASRock's itx entry, but this one has blown the Z87 Stinger from EVGA out of the water... i may have to convert to ROG... Reply
  • IlllI - Tuesday, June 04, 2013 - link

    evga motherboards are trash anyways. by the time they get a half decent bios their boards will be obsolete. Reply
  • 457R4LDR34DKN07 - Tuesday, June 04, 2013 - link

    http://www.asrock.com/mb/Intel/Z87E-ITX/index.us.a... It was featured in the haswell review. Reply
  • rakunSA - Tuesday, June 04, 2013 - link

    looks like the improved the formula to allow WC-ers to use any barbs they want and not limiting them to one size of ID tubing Reply
  • Homeles - Tuesday, June 04, 2013 - link

    Is there any *real* benefit to the "armor?" On a scale from one to tacky, the thing is a total eyesore.

    I have never liked the Sabertooth boards, and I'm disappointed to see it here. I guess it must be making ASUS money, though. Thank goodness it's removable, I guess.

    If there were an actual performance benefit to it, like being an effective passive cooling solution, I'd consider keeping it. Preventing board warp is not something I'm concerned about, though.
    Reply
  • danjw - Tuesday, June 04, 2013 - link

    It is a heatsink. So, yes it does serve a purpose, other then the added rigidity. The idea is that it supplies additional cooling for all the components on the motherboard that don't have separate heatsinks. Reply
  • Parablooper - Tuesday, June 04, 2013 - link

    Jesus just look at the surface area on the NB heatsink. Reply
  • daos - Friday, July 19, 2013 - link

    ummm northbridge? and where would that be? Reply
  • ffiarpg - Tuesday, June 04, 2013 - link

    The "armor" on this motherboard has nothing to do with supporting graphics card weight. Your case should support the bulk of the weight. Since the motherboard is secured to the case with so many screws it would not bend even if it was supporting the entire video card. The pci express connector would just snap off the motherboard. Reply

Log in

Don't have an account? Sign up now